Re: [PATCH V6 2/2] clk: vc5: Add support for IDT VersaClock 5P49V5923 and 5P49V5933

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/12, Marek Vasut wrote:
> Add driver for IDT VersaClock 5 5P49V5923 and 5P49V5933 chips. These
> chips have two clock inputs, XTAL or CLK, which are muxed into single
> PLL/VCO input. In case of 5P49V5923, the XTAL in built into the chip
> while the 5P49V5923 requires external XTAL.
> 
> The PLL feeds two fractional dividers. Each fractional divider feeds
> output mux, which allows selecting between clock from the fractional
> divider itself or from output mux on output N-1. In case of output
> mux 0, the output N-1 is instead connected to the output from the mux
> feeding the PLL.
> 
> The driver thus far supports only the 5P49V5923 and 5P49V5933, while
> it should be easily extensible to the whole 5P49V59xx family of chips
> as they are all pretty similar.
> 
> Signed-off-by: Marek Vasut <marek.vasut@xxxxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux