Some controllers have 2 clock sources instead of 1, so they both need
to be turned on/off.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
drivers/mmc/host/sh_mobile_sdhi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 59db14b..5ad5744 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -143,6 +143,7 @@ MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
struct sh_mobile_sdhi {
struct clk *clk;
+ struct clk *clk2;
struct tmio_mmc_data mmc_data;
struct tmio_mmc_dma dma_priv;
struct pinctrl *pinctrl;
@@ -190,6 +191,10 @@ static int sh_mobile_sdhi_clk_enable(struct tmio_mmc_host *host)
if (ret < 0)
return ret;
+ ret = clk_prepare_enable(priv->clk2);
+ if (ret < 0)
+ return ret;
+
/*
* The clock driver may not know what maximum frequency
* actually works, so it should be set with the max-frequency
@@ -255,6 +260,8 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host)
struct sh_mobile_sdhi *priv = host_to_priv(host);
clk_disable_unprepare(priv->clk);
+ if (priv->clk2)
+ clk_disable_unprepare(priv->clk2);
}
static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
@@ -572,6 +579,10 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
goto eprobe;
}
+ priv->clk2 = devm_clk_get(&pdev->dev, "carddetect");
+ if (IS_ERR(priv->clk2))
+ priv->clk2 = NULL;
+
priv->pinctrl = devm_pinctrl_get(&pdev->dev);
if (!IS_ERR(priv->pinctrl)) {
priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
--
2.10.1
