The Renesas R-Car Gen3 SoCs use a Synopsys DWC HDMI TX encoder IP. Add
corresponding device tree bindings based on the DWC HDMI TX bindings
model.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../bindings/display/bridge/renesas,dw-hdmi.txt | 75 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
new file mode 100644
index 000000000000..f6b3f36d422b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -0,0 +1,75 @@
+Renesas Gen3 DWC HDMI TX Encoder
+================================
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with a companion PHY IP.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
+
+Required properties:
+
+- compatible : Shall contain one or more of
+ - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
+ - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
+
+ When compatible with generic versions, nodes must list the SoC-specific
+ version corresponding to the platform first, followed by the
+ family-specific version.
+
+- reg: See dw_hdmi.txt.
+- interrupts: HDMI interrupt number
+- clocks: See dw_hdmi.txt.
+- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
+- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
+ corresponding to the video input of the controller and one port numbered 1
+ corresponding to its HDMI output. Each port shall have a single endpoint.
+
+Optional properties:
+
+- power-domains: Shall reference the power domain that contains the DWC HDMI,
+ if any.
+
+
+Example:
+
+ hdmi0: hdmi0@fead0000 {
+ compatible = "renesas,r8a7795-dw-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 30c873192458..a513fda157d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4231,6 +4231,7 @@ S: Supported
F: drivers/gpu/drm/rcar-du/
F: drivers/gpu/drm/shmobile/
F: include/linux/platform_data/shmob_drm.h
+F: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
F: Documentation/devicetree/bindings/display/renesas,du.txt
DRM DRIVER FOR QXL VIRTUAL GPU
--
Regards,
Laurent Pinchart
