From: Simon Horman <horms@xxxxxxxxxxxx> The RZ/G1M (r8a7743) uses the R-Car Gen2 core, but not the R-Car Gen2 clock driver. This is a harbinger of a transition for R-Car Gen2 SoCs. As the process to get all the required pieces in place is somewhat complex it seems useful to try to disentangle dependencies where possible. The approach here is to temporarily disable calling rcar_gen2_clocks_init() if no R-Car Gen2 SoC are configured and thus the symbol will not be present. Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- arch/arm/mach-shmobile/setup-rcar-gen2.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index afb9fdcd3d90..154e8051825a 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -15,6 +15,7 @@ * GNU General Public License for more details. */ +#include <linux/clk-provider.h> #include <linux/clk/renesas.h> #include <linux/clocksource.h> #include <linux/device.h> @@ -130,7 +131,15 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ - rcar_gen2_clocks_init(mode); + if (IS_ENABLED(CONFIG_ARCH_R8A7790) || + IS_ENABLED(CONFIG_ARCH_R8A7791) || + IS_ENABLED(CONFIG_ARCH_R8A7792) || + IS_ENABLED(CONFIG_ARCH_R8A7793) || + IS_ENABLED(CONFIG_ARCH_R8A7794)) + rcar_gen2_clocks_init(mode); + else + of_clk_init(NULL); + clocksource_probe(); } -- 2.7.0.rc3.207.g0ac5344