From: Hans Verkuil <hverkuil@xxxxxxxxx>
Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 68 +++++++++++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f17bfa000f73..c457b43deb7d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -265,12 +265,23 @@
};
};
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
- hdmi_con: endpoint {
+ hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
@@ -414,6 +425,11 @@
function = "usb1";
};
+ vin0_pins: vin0 {
+ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ function = "vin0";
+ };
+
vin1_pins: vin1 {
groups = "vin1_data8", "vin1_clk";
function = "vin1";
@@ -617,7 +633,34 @@
port@1 {
reg = <1>;
adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
};
};
};
@@ -699,6 +742,27 @@
cpu0-supply = <&vdd_dvfs>;
};
+/* HDMI video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep2: endpoint {
+ remote-endpoint = <&adv7612_out>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
+
/* composite video input */
&vin1 {
status = "okay";
--
2.7.0.rc3.207.g0ac5344
