Hi Geert,
I've got this message from Renesas:
"
Please use H3ULCB/M3ULCB in upstream.
# I got an agreement among parties.
Board name in community: ULCB (= development code name)
Official name (product/brand name): Starter Kit Pro/Premier
"
Renaming H3ULCB -> H3SK is not desired for Renesas.
What do you think to append the product/brand name only? :
- H3ULCB (RTP0RC7795SKB00010S)
+ H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
Regards,
Vladimir
On 25.10.2016 18:06, Vladimir Barinov wrote:
Hi Geert,
On 25.10.2016 15:48, Geert Uytterhoeven wrote:
Hi Vladimir,
On Wed, Aug 31, 2016 at 12:02 PM, Vladimir Barinov
<vladimir.barinov@xxxxxxxxxxxxxxxxxx> wrote:
Add H3ULCB Device tree bindings Documentation, listing it as a
supported
board.
Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Changes in version 2:
- none
Changes in version 3:
- none
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt
b/Documentation/devicetree/bindings/arm/shmobile.txt
index 5484c31d..2f0b716 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,6 +49,8 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,gose", "renesas,r8a7793"
+ - H3ULCB (RTP0RC7795SKB00010S)
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
Should this have been
H3SK (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3sk", "renesas,r8a7795";
instead?
Actually you are right, since Renesas naming policy changed:
originally the assigned name was H3ULCB and all boards that I have
labled as ULCB.
Now the official name is "R-Car Starter Kit Premier" and "R-Car
Starter Kit Pro" for H3/M3 respectively.
I've got this message from Renesas:
"
1. Official name for Gen3 low cost board
R-Car Starter Kit Premier (We called "H3ULCB")
R-Car Starter Kit Pro (We called "M3ULCB")
1-1. Please change the "M3ULCB/H3ULCB" to
"R-Car Starter Kit Pro/Premier" on elinux.
1-2. You DON'T have to change in source code.
You can use ULCB in Kernel, u-boot, Yocto recipe.
1-3. Please explain relations of "ULCB" and "Starter Kit" on elinux.
Ex) R-Car Starter Kit Premier = H3ULCB
"
What do think about changing only first line and leave "compatible" as
is, since h3ulcb have been using a while by different customers and
renaming of the board name will confuse? (If we change it to
"renesas,h3sk " then probably we need to rename the dts file
r8a7795-h3ulcb.dts and its content)
- - H3ULCB (RTP0RC7795SKB00010S)
+ - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
And would be the best for M3 Starter Kit?
The M3 Starter Kit board labeled as "M3 StarterKit", bit it is the
same board with different SiP.
Should it look like:
M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
compatible = "renesas,m3ulcb", "renesas,r8a7796";
or
M3SK (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
compatible = "renesas,m3sk", "renesas,r8a7796";
Regards,
Vladimir
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a
hacker. But
when I'm talking to journalists I just say "programmer" or something
like that.
-- Linus Torvalds
