Hi Chris,
On Tue, Sep 20, 2016 at 5:46 PM, Chris Brandt <chris.brandt@xxxxxxxxxxx> wrote:
> Since the MMC and SDHI1 on the RSK share the same socket connector (CN1),
> you cannot enable MMC and SDHI1 at the same time. Therefore the status
> has been set to disabled because SDHI is more popular with this board.
> However, keeping this code in here serves as a good way to document how
> the MMC on the RZ/A1 has been known to work for someone that does want
> to use MMC instead of SDHI1.
>
> A fixed 3.3 regulator is included because it is required by the mmc
> driver.
I have mixed feelings about adding these "disabled" nodes, purely for
documentation.
What do other people think?
> --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
> +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
> @@ -33,6 +33,15 @@
> #address-cells = <1>;
> #size-cells = <1>;
> };
> +
> + d3_3v: regulator-d3-3v {
> + compatible = "regulator-fixed";
> + regulator-name = "D3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
'status = "disabled";', too?
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
