This series enables the mmc driver for the RZ/A1. Nothing needed to be changed with the actual sh_mmcif driver. It worked fine as-is. As you can see, the status in the rskrza1 dst was left as disabled because I wanted to leave that code in there for refernce for someone later that actually has a board with an actaul eMMC chip. I tested with an MMC Plus card. For version 2: * First first patch that adds the clock has already been accepted * Add in the 3rd "card detect" interrupt that no one uses, but it is documented in the hardware manual so it is reflected in the DT. Chris Brandt (3): ARM: dts: r7s72100: add mmcif to device tree mmc: sh_mmcif: Document r7s72100 DT bindings ARM: dts: rskrza1: add mmc DT support Documentation/devicetree/bindings/mmc/renesas,mmcif.txt | 4 ++++ arch/arm/boot/dts/r7s72100-rskrza1.dts | 17 +++++++++++++++++ arch/arm/boot/dts/r7s72100.dtsi | 12 ++++++++++++ 3 files changed, 33 insertions(+) -- 2.9.2
