On Mon, Aug 22, 2016 at 05:04:10PM +0300, Sergei Shtylyov wrote:
> On 08/22/2016 10:33 AM, Simon Horman wrote:
>
> >>Define the Blanche board dependent part of the SDHI0 (connected to the
> >>micro-SD slot) device node along with the necessary voltage regulator.
> >>
> >>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> >>
> >>---
> >>This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's
> >>'renesas.git' repo plus the general purpose switches patch posted yesterday.
> >>
> >> arch/arm/boot/dts/r8a7792-blanche.dts | 25 +++++++++++++++++++++++++
> >> 1 file changed, 25 insertions(+)
> >>
> >>Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> >>===================================================================
> >>--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
> >>+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> >>@@ -103,6 +103,17 @@
> >> gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
> >> };
> >> };
> >>+
> >>+ vcc_sdhi0: regulator-vcc-sdhi0 {
> >>+ compatible = "regulator-fixed";
> >>+
> >>+ regulator-name = "SDHI0 Vcc";
> >>+ regulator-min-microvolt = <3300000>;
> >>+ regulator-max-microvolt = <3300000>;
> >>+
> >>+ gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
> >>+ enable-active-high;
> >>+ };
> >> };
> >
> >Is it intentional that there is no vccq_sdhi0 ?
>
> Yes, it's fixed at 3.3V.
Thanks, I have queued this up.
