On 08/22/2016 10:33 AM, Simon Horman wrote:
Define the Blanche board dependent part of the SDHI0 (connected to the micro-SD slot) device node along with the necessary voltage regulator. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> --- This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's 'renesas.git' repo plus the general purpose switches patch posted yesterday. arch/arm/boot/dts/r8a7792-blanche.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -103,6 +103,17 @@ gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; }; }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; };Is it intentional that there is no vccq_sdhi0 ?
Yes, it's fixed at 3.3V. [...] MBR, Sergei
