In R-CAR Gen3 series, it has some thermal sensors. The interrupt I/F
that can be used in thermal sensors is three. So it should be used
the interrupt I/F as shared.
This patch changes the shared settings for the thermal interrupts.
Signed-off-by: Gaku Inami <gaku.inami.xw@xxxxxxxxxxxxxx>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@xxxxxxxxxxxxxxx>
---
drivers/thermal/rcar_gen3_thermal.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index a9a372b..e640a14 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -416,6 +416,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
int ret = -ENODEV;
int idle;
struct device_node *tz_nd, *tmp_nd;
+ int i, irq_cnt;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -489,13 +490,18 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
rcar_gen3_thermal_irq_enable(priv);
/* Interrupt */
- if (irq) {
- ret = devm_request_irq(dev, irq->start,
- rcar_gen3_thermal_irq, 0,
- dev_name(dev), priv);
- if (ret) {
- dev_err(dev, "IRQ request failed\n ");
- goto error_unregister;
+ if (rcar_has_irq_support(priv)) {
+ irq_cnt = platform_irq_count(pdev);
+ for (i = 0; i < irq_cnt; i++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ ret = devm_request_irq(dev, irq->start,
+ rcar_gen3_thermal_irq,
+ IRQF_SHARED,
+ dev_name(dev), priv);
+ if (ret) {
+ dev_err(dev, "IRQ request failed\n ");
+ goto error_unregister;
+ }
}
}
--
1.9.1
