Hi Geert
> > Right, I had forgotten about that.
> > Fortunately the clk-rcar-gen2 driver has a sane failure mode for this case ;-)
> >
> > it seems the RCAN clock can just be modeled as a fixed clock. However,
> > its divider value isn't clear to me, as 15.9 MHz cannot be generated from PLL1
> > using an integer divider. Morimoto-san, can you please ask for clarification?
>
> OK.
> Now, I asked to HW team about that.
> Please wait.
RCAN divider is fixed for 1/49
PLL1 (= 1560MHz)
-> 1/2 (= 780MHz)
-> RCAN divider 1/49 (= 15.9183..MHz)
Is this clear for you ?
