On 06/10/2016 11:42 PM, Geert Uytterhoeven wrote:
The only problem I'm seeing (again) is the RCAN clock failing to
register:
rcar_gen2_cpg_clocks_init: failed to register cpg_clocks rcan clock (-12)
I was going to look at it yesterday but (wrongly) thought it somehow
cured itself... I'll look at it now.
The RCAN parent is the second clock in the CPG node's "clocks" property,
which you didn't provide.
Actually, the things are more complex. The figure 7.1c suggests that the
RCAN clock has different parent on R8A7792 than on the other SoCs -- namely
PLL1/VCO 1/4. That may be, since there's just no USB_EXTAL signal on this SoC
(it doesn't seem to support any USB IPs). Which means the 'clk-rcar-gen2'
driver can't work with the RCAN clock in its current form.
Gr{oetje,eeting}s,
Geert
MBR, Sergei
