[PATCH v2 3/9] mmc: tmio: Add UHS-I mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Based on work by Shinobu Uehara and Ben Dooks. This adds the voltage
switch operation needed for all UHS-I modes, but not the tuning needed
for SDR-104 which will come later.

Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/tmio_mmc.h     |  2 ++
 drivers/mmc/host/tmio_mmc_pio.c | 12 +++++++++++-
 include/linux/mmc/tmio.h        |  2 ++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index b44b5890290622..b1819c74965b47 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -101,6 +101,8 @@ struct tmio_mmc_host {
 	void (*clk_disable)(struct tmio_mmc_host *host);
 	int (*multi_io_quirk)(struct mmc_card *card,
 			      unsigned int direction, int blk_size);
+	int (*start_signal_voltage_switch)(struct mmc_host *mmc,
+					   struct mmc_ios *ios);
 };
 
 struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index ae81b34f17a5a5..53e5ba5a21914c 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -1012,12 +1012,20 @@ static int tmio_multi_io_quirk(struct mmc_card *card,
 	return blk_size;
 }
 
-static const struct mmc_host_ops tmio_mmc_ops = {
+static int tmio_mmc_card_busy(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	return !(sd_ctrl_read32(host, CTL_STATUS2) & TMIO_STATUS2_DAT0);
+}
+
+static struct mmc_host_ops tmio_mmc_ops = {
 	.request	= tmio_mmc_request,
 	.set_ios	= tmio_mmc_set_ios,
 	.get_ro         = tmio_mmc_get_ro,
 	.get_cd		= mmc_gpio_get_cd,
 	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+	.card_busy	= tmio_mmc_card_busy,
 	.multi_io_quirk	= tmio_multi_io_quirk,
 };
 
@@ -1116,7 +1124,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
 		goto host_free;
 	}
 
+	tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch;
 	mmc->ops = &tmio_mmc_ops;
+
 	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
 	mmc->caps2 |= pdata->capabilities2;
 	mmc->max_segs = 32;
diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h
index 5f5cd80e976500..b2f28e99503383 100644
--- a/include/linux/mmc/tmio.h
+++ b/include/linux/mmc/tmio.h
@@ -63,6 +63,8 @@
 #define TMIO_STAT_CMD_BUSY      0x40000000
 #define TMIO_STAT_ILL_ACCESS    0x80000000
 
+#define TMIO_STATUS2_DAT0	BIT(7)
+
 #define	CLK_CTL_DIV_MASK	0xff
 #define	CLK_CTL_SCLKEN		BIT(8)
 
-- 
2.7.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux