Re: [PATCH 2/2] pinctrl: sh-pfc: IPSRx and MOD_SELx should be set before GPSRx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert

> > From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> >
> > Gen2 / Gen3 datasheet will have below note in next version.
> > This patch follows this note.
> >
> > IPSRx and MOD_SELx registers shall be set before setting GPSRx
> > registers in case that they need to be configured.
> > MOD_SELx registers can be set either earlier or later than setting
> > IPSRx registers.
> 
> Does this note apply to R-Car Gen1 and SH7734, too?
> Both use the PINMUX_IPSR_MSEL() macro.

Yes, this note can be match for these.
But I'm not sure whether these datasheet will be updated.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux