On 2016-02-22 14:31:29 +0100, Ulrich Hecht wrote: > On Sun, Feb 14, 2016 at 5:55 PM, Niklas Söderlund > <niklas.soderlund+renesas@xxxxxxxxxxxx> wrote: > > Also I > > could only get frames if the video signal on the composite IN was NTSC, > > but this also applied to the soc_camera driver, it might be my test > > setup. > > I think it is. For me, PAL works just as well as NTSC. Yes it must have been my setup, I'm now using a PAL SNES as my video source and it works fine. I'm about ready to send out a v2 of this patch with all of Hans comments fixed. I only need to look at vidioc_[gs]_selection. It took some extra time since I found some bugs in how I handled DMA and that I had been to libera in porting the format code from soc-camera. It's all fixed and all v4l2-compliance tests I tried works. One concern I have is that I can't get some of the formats to display properly in qv4l2 (V4L2_PIX_FMT_NV16, V4L2_PIX_FMT_RGB555X, V4L2_PIX_FMT_RGB32) but I get the same 'errors' in the feed as I do with the soc-camera driver so I'm not spending so much time on the issue right now. Unfortunate the rework I have done clashes with your HDMI series Ulrich. If you wish I can rework the parts of your series that touches rcar-vin and post them as a separate series after v2? Let me know what you think. -- Regards, Niklas Söderlund
