Hi Geert-san,
Sorry for the delayed response.
> From: Geert Uytterhoeven
> Sent: Tuesday, February 02, 2016 8:02 PM
>
> Hi Shimoda-san,
>
> [dropping most CCs to avoid delaying your patch]
>
> On Thu, Jan 7, 2016 at 10:16 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
> > Since the related driver (CPG/MSSR driver) only manages the first module
> > clock, this driver should not handle the HSUSB registers. So, this patch
> > removes the HSUSB registers handling.
>
> > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
>
> > Example (R-Car H3):
> >
> > usb-phy@ee080200 {
> > compatible = "renesas,usb2-phy-r8a7795";
> > - reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
> > - reg-names = "usb2_host", "hsusb";
> > + reg = <0 0xee080200 0 0x700>;
> > interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
> > - <&mstp7_clks R8A7795_CLK_HSUSB>;
> > + clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
> > };
> >
> > usb-phy@ee0a0200 {
> > compatible = "renesas,usb2-phy-r8a7795";
> > reg = <0 0xee0a0200 0 0x700>;
> > - reg-names = "usb2_host";
> > clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
> > };
>
> BTW, I think the examples should be updated to use the CPG/MSSR DT
> bindings. That can/should be done in a separate patch, of course.
Thank you for the comment! I will revise the examples after this patch
is applied.
Best regards,
Yoshihiro Shimoda
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
