[RFC 1/2] mmc: tmio/sdhi: introduce flag for RCar specific features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

RCar implementations of TMIO/SDHI have their own set of additions.
FAST_CLK_CHG is just one of them and I see a few others being added
soon. Instead of adding a bunch of flags which all RCars share anyhow,
add a global one and add new flags only for real differences.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/sh_mobile_sdhi.c | 4 ++--
 drivers/mmc/host/tmio_mmc_pio.c   | 6 +++---
 include/linux/mfd/tmio.h          | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index f7eff5f53e0013..12419acb8ac9f5 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -62,7 +62,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
-			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_IS_RCAR,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
 	.dma_buswidth	= DMA_SLAVE_BUSWIDTH_4_BYTES,
 	.dma_rx_offset	= 0x2000,
@@ -70,7 +70,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen3_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
-			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_IS_RCAR,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY,
 	.bus_shift	= 2,
 };
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 03f6e74c190691..a564517f25d90a 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -177,7 +177,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
-	if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
+	if (!(host->pdata->flags & TMIO_MMC_IS_RCAR))
 		msleep(10);
 }
 
@@ -190,14 +190,14 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
+	msleep(host->pdata->flags & TMIO_MMC_IS_RCAR ? 5 : 10);
 }
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
+	msleep(host->pdata->flags & TMIO_MMC_IS_RCAR ? 1 : 10);
 
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 05d58ee5e6a78f..3d5cc6e0b40e32 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -66,8 +66,8 @@
  */
 #define TMIO_MMC_SDIO_IRQ		(1 << 2)
 
-/* Some controllers don't need to wait 10ms for clock changes */
-#define TMIO_MMC_FAST_CLK_CHG		(1 << 3)
+/* Controller is on Renesas RCar SoC having special features */
+#define TMIO_MMC_IS_RCAR		(1 << 3)
 
 /*
  * Some controllers require waiting for the SD bus to become
-- 
2.1.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux