Re: [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/22/2024 2:47 AM, Dmitry Baryshkov wrote:
On Fri, Jun 21, 2024 at 05:16:53PM GMT, Gokul Sriram Palanisamy wrote:
IPQ8074 uses secure PIL. Hence, adding the support for the same.
See Documentation/process/submitting-patches.rst
  Thanks. Will add detailed description.
Signed-off-by: Nikhil Prakash V <quic_nprakash@xxxxxxxxxxx>
Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
---
  drivers/remoteproc/qcom_q6v5_wcss.c | 43 +++++++++++++++++++++++++++--
  1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 366b19cbd994..e45e79d80238 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -18,6 +18,7 @@
  #include <linux/regulator/consumer.h>
  #include <linux/reset.h>
  #include <linux/soc/qcom/mdt_loader.h>
+#include <linux/firmware/qcom/qcom_scm.h>
  #include "qcom_common.h"
  #include "qcom_pil_info.h"
  #include "qcom_q6v5.h"
@@ -86,6 +87,9 @@
  #define TCSR_WCSS_CLK_ENABLE	0x14
#define MAX_HALT_REG 3
+
+#define WCNSS_PAS_ID		6
+
  enum {
  	WCSS_IPQ8074,
  	WCSS_QCS404,
@@ -134,6 +138,7 @@ struct q6v5_wcss {
  	unsigned int crash_reason_smem;
  	u32 version;
  	bool requires_force_stop;
+	bool need_mem_protection;
needs

struct qcom_rproc_glink glink_subdev;
  	struct qcom_rproc_ssr ssr_subdev;
@@ -152,6 +157,7 @@ struct wcss_data {
  	int ssctl_id;
  	const struct rproc_ops *ops;
  	bool requires_force_stop;
+	bool need_mem_protection;
needs
  Thanks. Will update.
  };
static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
@@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc *rproc)
qcom_q6v5_prepare(&wcss->q6v5); + if (wcss->need_mem_protection) {
+		ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID);
+		if (ret) {
+			dev_err(wcss->dev, "wcss_reset failed\n");
+			return ret;
+		}
+		goto wait_for_reset;
+	}
Use if/else instead of a goto.

  sure. Will update.


+
  	/* Release Q6 and WCSS reset */
  	ret = reset_control_deassert(wcss->wcss_reset);
  	if (ret) {
@@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc *rproc)
  	if (ret)
  		goto wcss_q6_reset;
+wait_for_reset:
This is more like wait_for_start
  yes, this looks more appropriate. Will update. Thanks.
  	ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
  	if (ret == -ETIMEDOUT)
  		dev_err(wcss->dev, "start timed out\n");
@@ -718,6 +734,15 @@ static int q6v5_wcss_stop(struct rproc *rproc)
  	struct q6v5_wcss *wcss = rproc->priv;
  	int ret;
+ if (wcss->need_mem_protection) {
+		ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID);
+		if (ret) {
+			dev_err(wcss->dev, "not able to shutdown\n");
+			return ret;
+		}
+		goto pas_done;
+	}
if/else. Or abstract this to functions.
  sure. Will update appropriately.
+
  	/* WCSS powerdown */
  	if (wcss->requires_force_stop) {
  		ret = qcom_q6v5_request_stop(&wcss->q6v5, NULL);
@@ -742,6 +767,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
  			return ret;
  	}
+pas_done:
  	clk_disable_unprepare(wcss->prng_clk);
  	qcom_q6v5_unprepare(&wcss->q6v5);
@@ -765,9 +791,15 @@ static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
  	struct q6v5_wcss *wcss = rproc->priv;
  	int ret;
- ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
-				    0, wcss->mem_region, wcss->mem_phys,
-				    wcss->mem_size, &wcss->mem_reloc);
+	if (wcss->need_mem_protection)
+		ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
+				    WCNSS_PAS_ID, wcss->mem_region,
+				    wcss->mem_phys, wcss->mem_size,
+				    &wcss->mem_reloc);
+	else
+		ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
+					    0, wcss->mem_region, wcss->mem_phys,
+					    wcss->mem_size, &wcss->mem_reloc);
  	if (ret)
  		return ret;
@@ -1035,6 +1067,9 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
  	if (!desc)
  		return -EINVAL;
+ if (desc->need_mem_protection && !qcom_scm_is_available())
+		return -EPROBE_DEFER;
+
  	rproc = devm_rproc_alloc(&pdev->dev, pdev->name, desc->ops,
  				 desc->firmware_name, sizeof(*wcss));
  	if (!rproc) {
@@ -1048,6 +1083,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
wcss->version = desc->version;
  	wcss->requires_force_stop = desc->requires_force_stop;
+	wcss->need_mem_protection = desc->need_mem_protection;
ret = q6v5_wcss_init_mmio(wcss, pdev);
  	if (ret)
@@ -1111,6 +1147,7 @@ static const struct wcss_data wcss_ipq8074_res_init = {
  	.wcss_q6_reset_required = true,
  	.ops = &q6v5_wcss_ipq8074_ops,
  	.requires_force_stop = true,
+	.need_mem_protection = true,
  };
static const struct wcss_data wcss_qcs404_res_init = {
--
2.34.1





[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux