IPQ8074 needs support for secure pil as well. Also, currently only unified firmware is supported. IPQ8074 supports split firmware for q6 and m3, so adding support for that. changes since v8: - Rebased on top of Linux 6.10-rc4 Gokul Sriram Palanisamy (8): remoteproc: qcom: Add PRNG proxy clock remoteproc: qcom: Add secure PIL support remoteproc: qcom: Add support for split q6 + m3 wlan firmware remoteproc: qcom: Add ssr subdevice identifier remoteproc: qcom: Update regmap offsets for halt register dt-bindings: clock: qcom: Add reset for WCSSAON clk: qcom: Add WCSSAON reset arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC arch/arm64/boot/dts/qcom/ipq8074.dtsi | 80 +++++++++ drivers/clk/qcom/gcc-ipq8074.c | 1 + drivers/remoteproc/qcom_q6v5_wcss.c | 162 +++++++++++++++---- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + 4 files changed, 212 insertions(+), 32 deletions(-) -- 2.34.1
