Hi Andrew,
On 04/06/24 22:40, Andrew Davis wrote:
On 6/4/24 12:17 AM, Beleswar Padhi wrote:
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx>
---
drivers/remoteproc/ti_k3_r5_remoteproc.c | 74 +++++++++---------------
1 file changed, 26 insertions(+), 48 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c
b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index 26362a509ae3c..7e02e3472ce25 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -194,6 +194,10 @@ static void k3_r5_rproc_mbox_callback(struct
mbox_client *client, void *data)
const char *name = kproc->rproc->name;
u32 msg = omap_mbox_message(data);
+ /* Do not forward message to a detached core */
s/to/from
This is the receive side from the core.
+ if (kproc->rproc->state == RPROC_DETACHED)
+ return;
+
Do we need a similar check when sending messages to the core in
k3_r5_rproc_kick()? No one should be sending anything as they
all should have detached at this point, but something to double
check on.
Will add this in the next revision.
dev_dbg(dev, "mbox msg: 0x%x\n", msg);
switch (msg) {
@@ -399,12 +403,9 @@ static int k3_r5_rproc_request_mbox(struct rproc
*rproc)
client->knows_txdone = false;
kproc->mbox = mbox_request_channel(client, 0);
- if (IS_ERR(kproc->mbox)) {
- ret = -EBUSY;
- dev_err(dev, "mbox_request_channel failed: %ld\n",
- PTR_ERR(kproc->mbox));
- return ret;
- }
+ if (IS_ERR(kproc->mbox))
+ return dev_err_probe(dev, PTR_ERR(kproc->mbox),
+ "mbox_request_channel failed\n");
This is good cleanup, but maybe something for its own patch.
I think this cleanup is dependent to this patch itself. The current
patch moves the mbox_handle_request to probe routine. And the cleanup
returns an -EDEFER_PROBE ERR code. So, this cleanup is only valid if the
current patch is applied. Else, if this err code is returned at any
point after creation of child devices, it could lead to a infinite
loop[0]. Please correct me if I am wrong..?
[0]:
https://www.kernel.org/doc/html/v6.5-rc3/driver-api/driver-model/driver.html#callbacks
/*
* Ping the remote processor, this is only for sanity-sake for
now;
@@ -552,10 +553,6 @@ static int k3_r5_rproc_start(struct rproc *rproc)
u32 boot_addr;
int ret;
- ret = k3_r5_rproc_request_mbox(rproc);
- if (ret)
- return ret;
-
boot_addr = rproc->bootaddr;
/* TODO: add boot_addr sanity checking */
dev_dbg(dev, "booting R5F core using boot addr = 0x%x\n",
boot_addr);
@@ -564,7 +561,7 @@ static int k3_r5_rproc_start(struct rproc *rproc)
core = kproc->core;
ret = ti_sci_proc_set_config(core->tsp, boot_addr, 0, 0);
if (ret)
- goto put_mbox;
+ return ret;
/* unhalt/run all applicable cores */
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
@@ -580,13 +577,12 @@ static int k3_r5_rproc_start(struct rproc *rproc)
if (core != core0 && core0->rproc->state == RPROC_OFFLINE) {
dev_err(dev, "%s: can not start core 1 before core 0\n",
__func__);
- ret = -EPERM;
- goto put_mbox;
+ return -EPERM;
}
ret = k3_r5_core_run(core);
if (ret)
- goto put_mbox;
+ return ret;
}
return 0;
@@ -596,8 +592,6 @@ static int k3_r5_rproc_start(struct rproc *rproc)
if (k3_r5_core_halt(core))
dev_warn(core->dev, "core halt back failed\n");
}
-put_mbox:
- mbox_free_channel(kproc->mbox);
return ret;
}
@@ -658,8 +652,6 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
goto out;
}
- mbox_free_channel(kproc->mbox);
-
return 0;
unroll_core_halt:
@@ -674,42 +666,22 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
/*
* Attach to a running R5F remote processor (IPC-only mode)
*
- * The R5F attach callback only needs to request the mailbox, the
remote
- * processor is already booted, so there is no need to issue any TI-SCI
- * commands to boot the R5F cores in IPC-only mode. This callback is
invoked
- * only in IPC-only mode.
+ * The R5F attach callback is a NOP. The remote processor is already
booted, and
+ * all required resources have been acquired during probe routine,
so there is
+ * no need to issue any TI-SCI commands to boot the R5F cores in
IPC-only mode.
+ * This callback is invoked only in IPC-only mode and exists because
+ * rproc_validate() checks for its existence.
*/
-static int k3_r5_rproc_attach(struct rproc *rproc)
-{
- struct k3_r5_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
- int ret;
-
- ret = k3_r5_rproc_request_mbox(rproc);
- if (ret)
- return ret;
-
- dev_info(dev, "R5F core initialized in IPC-only mode\n");
- return 0;
-}
+static int k3_r5_rproc_attach(struct rproc *rproc) { return 0; }
I wonder if rproc_validate() should be updated to allow not
having an attach/detach for cases like this. Then we could drop
this function completely.
Andrew
/*
* Detach from a running R5F remote processor (IPC-only mode)
*
- * The R5F detach callback performs the opposite operation to attach
callback
- * and only needs to release the mailbox, the R5F cores are not
stopped and
- * will be left in booted state in IPC-only mode. This callback is
invoked
- * only in IPC-only mode.
+ * The R5F detach callback is a NOP. The R5F cores are not stopped
and will be
+ * left in booted state in IPC-only mode. This callback is invoked
only in
+ * IPC-only mode and exists for sanity sake.
*/
-static int k3_r5_rproc_detach(struct rproc *rproc)
-{
- struct k3_r5_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
-
- mbox_free_channel(kproc->mbox);
- dev_info(dev, "R5F core deinitialized in IPC-only mode\n");
- return 0;
-}
+static int k3_r5_rproc_detach(struct rproc *rproc) { return 0; }
/*
* This function implements the .get_loaded_rsc_table() callback
and is used
@@ -1277,6 +1249,10 @@ static int k3_r5_cluster_rproc_init(struct
platform_device *pdev)
kproc->rproc = rproc;
core->rproc = rproc;
+ ret = k3_r5_rproc_request_mbox(rproc);
+ if (ret)
+ return ret;
+
ret = k3_r5_rproc_configure_mode(kproc);
if (ret < 0)
goto err_config;
@@ -1393,6 +1369,8 @@ static void k3_r5_cluster_rproc_exit(void *data)
}
}
+ mbox_free_channel(kproc->mbox);
+
rproc_del(rproc);
k3_r5_reserved_mem_exit(kproc);
