Re: [PATCH 10/11] arm64: dts: qcom: ipq5018: Add MP03.5-c1 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/7/2023 9:12 PM, Krzysztof Kozlowski wrote:
On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
Add initial device tree support for the MP03.5-C1 board.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |  1 +
  .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
  2 files changed, 65 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b77a95e97a56..10d1eafe57e4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
new file mode 100644
index 000000000000..51ddd7367ac6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 CP01 board device tree source
+ *
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
+	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";

Not a common DT property. Drop.

Sure, i will drop it.
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&tlmm {
+	blsp0_uart_pins: uart_pins {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

I'll stop the review. Please first run tests.


I will verify DTS against bindings.

Thanks & Regards,
Manikanta.


Best regards,
Krzysztof




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux