Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathieu,

On 1/6/21 5:27 PM, Mathieu Poirier wrote:
> On Wed, Dec 16, 2020 at 05:52:34PM +0100, Grzegorz Jaszczyk wrote:
>> Hi All,
>>
>> The Programmable Real-Time Unit and Industrial Communication Subsystem
>> (PRU-ICSS or simply PRUSS) on various TI SoCs consists of dual 32-bit
>> RISC cores (Programmable Real-Time Units, or PRUs) for program execution.
>>
>> There are 3 foundation components for PRUSS subsystem: the PRUSS platform
>> driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All were
>> already merged and can be found under:
>> 1) drivers/soc/ti/pruss.c
>>    Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> 2) drivers/irqchip/irq-pruss-intc.c
>>    Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
>> 3) drivers/remoteproc/pru_rproc.c
>>    Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>
>> The programmable nature of the PRUs provide flexibility to implement custom
>> peripheral interfaces, fast real-time responses, or specialized data handling.
>> Example of a PRU consumer drivers will be:
>>   - Software UART over PRUSS
>>   - PRU-ICSS Ethernet EMAC
>>
>> In order to make usage of common PRU resources and allow the consumer drivers to
>> configure the PRU hardware for specific usage the PRU API is introduced.
>>
>> Patch #3 of this series depends on one not merged remteproc related patch [1].
>>
>> Please see the individual patches for exact changes in each patch, following is
>> the only change from v1:
>>  - Change the 'prus' property name to 'ti,prus' as suggested by Rob Herring,
>>  which influences patch #1 and patch #2
>>
>> [1] https://patchwork.kernel.org/project/linux-remoteproc/patch/20201121030156.22857-3-s-anna@xxxxxx/
>>
>> Best regards,
>> Grzegorz
>>
>> Roger Quadros (1):
>>   remoteproc: pru: Add pru_rproc_set_ctable() function
>>
>> Suman Anna (2):
>>   dt-bindings: remoteproc: Add PRU consumer bindings
>>   remoteproc: pru: Deny rproc sysfs ops for PRU client driven boots
>>
>> Tero Kristo (2):
>>   remoteproc: pru: Add APIs to get and put the PRU cores
>>   remoteproc: pru: Configure firmware based on client setup
>>
>>  .../bindings/remoteproc/ti,pru-consumer.yaml  |  64 +++++
>>  drivers/remoteproc/pru_rproc.c                | 221 +++++++++++++++++-
>>  include/linux/pruss.h                         |  78 +++++++
> 
> This patchset is giving checkpatch.pl errors and as such will not go further
> with this revision.

Yeah, I am aware of those. Greg has intentionally skipped the checkpatch
warnings around ENOTSUPP, based on some similar discussion on a different patch,
https://lkml.org/lkml/2020/11/10/764.

Let me know if you prefer that we change these to EOPNOTSUPP.

regards
Suman

> 
>>  3 files changed, 360 insertions(+), 3 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
>>  create mode 100644 include/linux/pruss.h
>>
>> -- 
>> 2.29.0
>>




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux