The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).
On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/meson.dtsi | 7 +++++++
arch/arm/boot/dts/meson8.dtsi | 21 +++++++++++++++++++++
arch/arm/boot/dts/meson8b.dtsi | 21 +++++++++++++++++++++
3 files changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index e0ca5f08d07d..8bae6ed0abb2 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -200,6 +200,13 @@ aobus: aobus@c8100000 {
#size-cells = <1>;
ranges = <0x0 0xc8100000 0x100000>;
+ ao_arc_rproc: remoteproc@1c {
+ compatible= "amlogic,meson-mx-ao-arc";
+ reg = <0x1c 0x8>, <0x38 0x8>;
+ reg-names = "remap", "cpu";
+ status = "disabled";
+ };
+
ir_receiver: ir-receiver@480 {
compatible= "amlogic,meson6-ir";
reg = <0x480 0x20>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 420324ea2ad7..157a950a55d3 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -369,6 +369,14 @@ mux {
};
};
+&ao_arc_rproc {
+ compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+ amlogic,secbus2 = <&secbus2>;
+ sram = <&ao_arc_sram>;
+ resets = <&reset RESET_MEDIA_CPU>;
+ clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
&cbus {
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
@@ -496,6 +504,12 @@ mux {
};
&ahb_sram {
+ ao_arc_sram: ao-arc-sram@0 {
+ compatible = "amlogic,meson8-ao-arc-sram";
+ reg = <0x0 0x8000>;
+ pool;
+ };
+
smp-sram@1ff80 {
compatible = "amlogic,meson8-smp-sram";
reg = <0x1ff80 0x8>;
@@ -631,6 +645,13 @@ &sdhc {
clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
};
+&secbus {
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
+};
+
&sdio {
compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index dbf7963b6c87..c02b03cbcdf4 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -320,6 +320,14 @@ mux {
};
};
+&ao_arc_rproc {
+ compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+ amlogic,secbus2 = <&secbus2>;
+ sram = <&ao_arc_sram>;
+ resets = <&reset RESET_MEDIA_CPU>;
+ clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
&cbus {
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
@@ -464,6 +472,12 @@ mux {
};
&ahb_sram {
+ ao_arc_sram: ao-arc-sram@0 {
+ compatible = "amlogic,meson8b-ao-arc-sram";
+ reg = <0x0 0x8000>;
+ pool;
+ };
+
smp-sram@1ff80 {
compatible = "amlogic,meson8b-smp-sram";
reg = <0x1ff80 0x8>;
@@ -628,6 +642,13 @@ &sdhc {
clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
};
+&secbus {
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8b-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
+};
+
&sdio {
compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
--
2.30.0
