On 30. 11. 20 16:57, Ben Levinsky wrote:
> Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
> later use via request_node and release_node
>
> Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
> ---
> include/linux/firmware/xlnx-zynqmp.h | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 5968df82b991..0dd2d188f8aa 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -104,6 +104,10 @@ enum pm_ret_status {
> };
>
> enum pm_ioctl_id {
> + IOCTL_GET_RPU_OPER_MODE = 0,
> + IOCTL_SET_RPU_OPER_MODE = 1,
> + IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
> + IOCTL_TCM_COMB_CONFIG = 3,
> IOCTL_SD_DLL_RESET = 6,
> IOCTL_SET_SD_TAPDELAY,
> IOCTL_SET_PLL_FRAC_MODE,
> @@ -129,6 +133,21 @@ enum pm_query_id {
> PM_QID_CLOCK_GET_MAX_DIVISOR,
> };
>
> +enum rpu_oper_mode {
> + PM_RPU_MODE_LOCKSTEP = 0,
> + PM_RPU_MODE_SPLIT = 1,
> +};
> +
> +enum rpu_boot_mem {
> + PM_RPU_BOOTMEM_LOVEC = 0,
> + PM_RPU_BOOTMEM_HIVEC = 1,
> +};
> +
> +enum rpu_tcm_comb {
> + PM_RPU_TCM_SPLIT = 0,
> + PM_RPU_TCM_COMB = 1,
> +};
> +
> enum zynqmp_pm_reset_action {
> PM_RESET_ACTION_RELEASE,
> PM_RESET_ACTION_ASSERT,
> @@ -273,6 +292,10 @@ enum zynqmp_pm_request_ack {
> };
>
> enum pm_node_id {
> + NODE_TCM_0_A = 0xf,
> + NODE_TCM_0_B = 0x10,
> + NODE_TCM_1_A = 0x11,
> + NODE_TCM_1_B = 0x12,
Please convert these hex to int to be aligned with the rest.
> NODE_SD_0 = 39,
> NODE_SD_1,
> };
>
When that fixed feel free to add.
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
Thanks,
Michal
