Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
later use via request_node and release_node
Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
---
v23: add TCM Node IDs to be used in R5 Remoteproc driver
---
include/linux/firmware/xlnx-zynqmp.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df82b991..0dd2d188f8aa 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -104,6 +104,10 @@ enum pm_ret_status {
};
enum pm_ioctl_id {
+ IOCTL_GET_RPU_OPER_MODE = 0,
+ IOCTL_SET_RPU_OPER_MODE = 1,
+ IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+ IOCTL_TCM_COMB_CONFIG = 3,
IOCTL_SD_DLL_RESET = 6,
IOCTL_SET_SD_TAPDELAY,
IOCTL_SET_PLL_FRAC_MODE,
@@ -129,6 +133,21 @@ enum pm_query_id {
PM_QID_CLOCK_GET_MAX_DIVISOR,
};
+enum rpu_oper_mode {
+ PM_RPU_MODE_LOCKSTEP = 0,
+ PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+ PM_RPU_BOOTMEM_LOVEC = 0,
+ PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+ PM_RPU_TCM_SPLIT = 0,
+ PM_RPU_TCM_COMB = 1,
+};
+
enum zynqmp_pm_reset_action {
PM_RESET_ACTION_RELEASE,
PM_RESET_ACTION_ASSERT,
@@ -273,6 +292,10 @@ enum zynqmp_pm_request_ack {
};
enum pm_node_id {
+ NODE_TCM_0_A = 0xf,
+ NODE_TCM_0_B = 0x10,
+ NODE_TCM_1_A = 0x11,
+ NODE_TCM_1_B = 0x12,
NODE_SD_0 = 39,
NODE_SD_1,
};
--
2.17.1
