On 18/09/2020 08:44, Pi-Hsun Shih wrote:
Add support for mt8192 SCP.
Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
Reviewed-by: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
---
Change since v1:
* Remove unused register definitions.
---
drivers/remoteproc/mtk_common.h | 32 +++++
drivers/remoteproc/mtk_scp.c | 207 ++++++++++++++++++++++++++-----
drivers/remoteproc/mtk_scp_ipi.c | 5 +-
3 files changed, 211 insertions(+), 33 deletions(-)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index 0066c83636d0..47b4561443a9 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -32,6 +32,23 @@
#define MT8183_SCP_CACHESIZE_8KB BIT(8)
#define MT8183_SCP_CACHE_CON_WAYEN BIT(10)
+#define MT8192_L2TCM_SRAM_PD_0 0x210C0
+#define MT8192_L2TCM_SRAM_PD_1 0x210C4
+#define MT8192_L2TCM_SRAM_PD_2 0x210C8
+#define MT8192_L1TCM_SRAM_PDN 0x2102C
+#define MT8192_CPU0_SRAM_PD 0x21080
+
+#define MT8192_SCP2APMCU_IPC_SET 0x24080
+#define MT8192_SCP2APMCU_IPC_CLR 0x24084
+#define MT8192_SCP_IPC_INT_BIT BIT(0)
+#define MT8192_SCP2SPM_IPC_CLR 0x24094
+#define MT8192_GIPC_IN_SET 0x24098
+#define MT8192_HOST_IPC_INT_BIT BIT(0)
+
+#define MT8192_CORE0_SW_RSTN_CLR 0x30000
+#define MT8192_CORE0_SW_RSTN_SET 0x30004
+#define MT8192_CORE0_WDT_CFG 0x30034
+
#define SCP_FW_VER_LEN 32
#define SCP_SHARE_BUFFER_SIZE 288
@@ -50,6 +67,19 @@ struct scp_ipi_desc {
void *priv;
};
+struct mtk_scp;
+
+struct mtk_scp_of_data {
+ int (*scp_before_load)(struct mtk_scp *scp);
+ void (*scp_irq_handler)(struct mtk_scp *scp);
+ void (*scp_reset_assert)(struct mtk_scp *scp);
+ void (*scp_reset_deassert)(struct mtk_scp *scp);
+ void (*scp_stop)(struct mtk_scp *scp);
+
+ u32 host_to_scp_reg;
+ u32 host_to_scp_int_bit;
+};
+
struct mtk_scp {
struct device *dev;
struct rproc *rproc;
@@ -58,6 +88,8 @@ struct mtk_scp {
void __iomem *sram_base;
size_t sram_size;
+ const struct mtk_scp_of_data *data;
+
struct mtk_share_obj __iomem *recv_buf;
struct mtk_share_obj __iomem *send_buf;
struct scp_run run;
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index ac13e7b046a6..f5f226a7b34c 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -124,9 +124,6 @@ static int scp_ipi_init(struct mtk_scp *scp)
size_t send_offset = SCP_FW_END - sizeof(struct mtk_share_obj);
size_t recv_offset = send_offset - sizeof(struct mtk_share_obj);
- /* Disable SCP to host interrupt */
- writel(MT8183_SCP_IPC_INT_BIT, scp->reg_base + MT8183_SCP_TO_HOST);
-
/* shared buffer initialization */
scp->recv_buf =
(struct mtk_share_obj __iomem *)(scp->sram_base + recv_offset);
@@ -138,7 +135,7 @@ static int scp_ipi_init(struct mtk_scp *scp)
return 0;
}
-static void scp_reset_assert(const struct mtk_scp *scp)
+static void mt8183_scp_reset_assert(struct mtk_scp *scp)
{
u32 val;
@@ -147,7 +144,7 @@ static void scp_reset_assert(const struct mtk_scp *scp)
writel(val, scp->reg_base + MT8183_SW_RSTN);
}
-static void scp_reset_deassert(const struct mtk_scp *scp)
+static void mt8183_scp_reset_deassert(struct mtk_scp *scp)
{
u32 val;
@@ -156,17 +153,29 @@ static void scp_reset_deassert(const struct mtk_scp *scp)
writel(val, scp->reg_base + MT8183_SW_RSTN);
}
-static irqreturn_t scp_irq_handler(int irq, void *priv)
+static void mt8192_scp_reset_assert(struct mtk_scp *scp)
{
- struct mtk_scp *scp = priv;
- u32 scp_to_host;
- int ret;
+ writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
+}
- ret = clk_prepare_enable(scp->clk);
- if (ret) {
- dev_err(scp->dev, "failed to enable clocks\n");
- return IRQ_NONE;
- }
+static void mt8192_scp_reset_deassert(struct mtk_scp *scp)
+{
+ writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_CLR);
+}
+
+static void scp_reset_assert(struct mtk_scp *scp)
+{
+ scp->data->scp_reset_assert(scp);
I think we can call scp->data->scp_reset_assert(scp) directly.
+}
+
+static void scp_reset_deassert(struct mtk_scp *scp)
+{
+ scp->data->scp_reset_deassert(scp);
Same here.
Regards,
Matthias