Hi mathieu,
On 9/19/20 1:10 AM, Mathieu Poirier wrote:
> Hey Arnaud,
>
> On Tue, Aug 25, 2020 at 06:49:04PM +0200, Arnaud Pouliquen wrote:
>> The name service announcement should not be linked to the RPMsg virtio bus
>> but to the RPMsg protocol itself.
>>
>> This patch proposes to break the dependency with the RPmsg virtio bus by
>> the introduction of the reserved RPMsg name service driver which will be in
>> charge of managing the RPMsg name service announcement.
>>
>> This first patch only implements the probe and the RPMsg endpoint to
>> manage create and release channels remote requests.
>>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
>> ---
>> drivers/rpmsg/Kconfig | 8 ++
>> drivers/rpmsg/Makefile | 1 +
>> drivers/rpmsg/rpmsg_internal.h | 17 +++++
>> drivers/rpmsg/rpmsg_ns.c | 135 +++++++++++++++++++++++++++++++++
>> 4 files changed, 161 insertions(+)
>> create mode 100644 drivers/rpmsg/rpmsg_ns.c
>>
>> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
>> index f96716893c2a..c3fc75e6514b 100644
>> --- a/drivers/rpmsg/Kconfig
>> +++ b/drivers/rpmsg/Kconfig
>> @@ -15,6 +15,14 @@ config RPMSG_CHAR
>> in /dev. They make it possible for user-space programs to send and
>> receive rpmsg packets.
>>
>> +config RPMSG_NS
>> + tristate "RPMSG name service announcement"
>> + depends on RPMSG
>> + help
>> + Say Y here to enable the support of the name service announcement
>> + channel that probes the associated RPMsg device on remote endpoint
>> + service announcement.
>> +
>> config RPMSG_MTK_SCP
>> tristate "MediaTek SCP"
>> depends on MTK_SCP
>> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
>> index ffe932ef6050..8d452656f0ee 100644
>> --- a/drivers/rpmsg/Makefile
>> +++ b/drivers/rpmsg/Makefile
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>> obj-$(CONFIG_RPMSG) += rpmsg_core.o
>> obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
>> +obj-$(CONFIG_RPMSG_NS) += rpmsg_ns.o
>> obj-$(CONFIG_RPMSG_MTK_SCP) += mtk_rpmsg.o
>> qcom_glink-objs := qcom_glink_native.o qcom_glink_ssr.o
>> obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
>> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
>> index d5ab286d0e5e..641b48f6bf2a 100644
>> --- a/drivers/rpmsg/rpmsg_internal.h
>> +++ b/drivers/rpmsg/rpmsg_internal.h
>> @@ -102,4 +102,21 @@ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
>> return rpmsg_register_device(rpdev);
>> }
>>
>> +/**
>> + * rpmsg_ns_register_device() - register name service device based on rpdev
>> + * @rpdev: prepared rpdev to be used for creating endpoints
>> + *
>> + * This function wraps rpmsg_register_device() preparing the rpdev for use as
>> + * basis for the rpmsg name service device.
>> + */
>> +static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
>> +{
>> + strcpy(rpdev->id.name, "rpmsg_ns");
>> + rpdev->driver_override = "rpmsg_ns";
>> + rpdev->src = RPMSG_NS_ADDR;
>> + rpdev->dst = RPMSG_NS_ADDR;
>> +
>> + return rpmsg_register_device(rpdev);
>> +}
>> +
>> #endif
>> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
>> new file mode 100644
>> index 000000000000..3c929b6976a6
>> --- /dev/null
>> +++ b/drivers/rpmsg/rpmsg_ns.c
>> @@ -0,0 +1,135 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
>> + */
>> +#include <linux/device.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include "rpmsg_internal.h"
>> +
>> +/**
>> + * enum rpmsg_ns_flags - dynamic name service announcement flags
>> + *
>> + * @RPMSG_NS_CREATE: a new remote service was just created
>> + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
>> + */
>> +enum rpmsg_ns_flags {
>> + RPMSG_NS_CREATE = 0,
>> + RPMSG_NS_DESTROY = 1,
>> +};
>> +
>> +/**
>> + * struct rpmsg_ns_msg - dynamic name service announcement message
>> + * @name: name of remote service that is published
>> + * @addr: address of remote service that is published
>> + * @flags: indicates whether service is created or destroyed
>> + *
>> + * This message is sent across to publish a new service, or announce
>> + * about its removal. When we receive these messages, an appropriate
>> + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
>> + * or ->remove() handler of the appropriate rpmsg driver will be invoked
>> + * (if/as-soon-as one is registered).
>> + */
>> +struct rpmsg_ns_msg {
>> + char name[RPMSG_NAME_SIZE];
>> + __le32 addr;
>> + __le32 flags;
>> +} __packed;
>> +
>> +/* Invoked when a name service announcement arrives */
>> +static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
>> + void *priv, u32 src)
>> +{
>> + struct rpmsg_ns_msg *msg = data;
>> + struct rpmsg_device *newch;
>> + struct rpmsg_channel_info chinfo;
>> + struct device *dev = &rpdev->dev;
>> + unsigned int flags = le32_to_cpu(msg->flags);
>> + int ret;
>> +
>> +#if defined(CONFIG_DYNAMIC_DEBUG)
>> + dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
>> + data, len, true);
>> +#endif
>> +
>> + if (len != sizeof(*msg)) {
>> + dev_err(dev, "malformed ns msg (%d)\n", len);
>> + return -EINVAL;
>> + }
>> +
>> + /* Don't trust the remote processor for null terminating the name */
>> + msg->name[RPMSG_NAME_SIZE - 1] = '\0';
>> +
>> + strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
>> + chinfo.src = RPMSG_ADDR_ANY;
>> + chinfo.dst = le32_to_cpu(msg->addr);
>
> As I said in an earlier comment I would like to avoid redefining structures that
> already exist. With this patch [1] we made structure rpmsg_hdr and rpmsg_ns_msg
> virtIO specific, which in hindsight, wasn't the best move forward. After taking
> another look at this set and keeping Guennadi's work in mind it is probably best
> to keep rpmsg_hdr and rpmsg_ns_msg generic and do the byte conversion based on
> the transport layer used by the rpmsg_device. Taking the above as an example we
> would have:
>
> chinfo.dst = rpmsg32_to_cpu(rpdev, msg->addr);
>
> Where rpmsg32_to_cpu() would be defined as follow:
>
> u32 rpmsg32_to_cpu(struct rpmsg_device *rpdev, u32 val)
> {
> return rpdev->ops->transport32_to_cpu(rpdev, val);
> }
>
> And in the case of a virtIO based rpmsg_device like we currently have:
>
> u32 virtio_transport32_to_cpu(struct rpmsg_device *rpdev, u32 val)
> {
> struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
> struct virtproc_info *vrp = vch->vrp;
>
> return virtio32_to_cpu(vrp->vdev, val);
> }
>
> That would allow the virtualization people (and anyone else) to use the RPMSG
> common code without modification and split up RPMSG name service from the
> transport layer, as you're doing in this patch.
This looks to me an excellent idea! More flexible than patch [1].
I'm just wondering if it wouldn't be useful to extend API to 16 and 64 bits for
future evolutions.
>
> We need to fix the current code before moving further with either
> patchset (yours and Guennadi's). I started working on a patchset that does that
> but I'll need to merge it with yours on Monday (I'm out of time for today).
That makes sense.
Thanks,
Arnaud
>
> Thanks,
> Mathieu
>
> [1]. 111d1089700c rpmsg: virtio: add endianness conversions
>
>> +
>> + dev_info(dev, "%sing channel %s addr 0x%x\n",
>> + (flags & RPMSG_NS_DESTROY) ? "destroy" : "creat",
>> + msg->name, chinfo.dst);
>> +
>> + if (flags & RPMSG_NS_DESTROY) {
>> + ret = rpmsg_release_channel(rpdev, &chinfo);
>> + if (ret)
>> + dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
>> + } else {
>> + newch = rpmsg_create_channel(rpdev, &chinfo);
>> + if (!newch)
>> + dev_err(dev, "rpmsg_create_channel failed\n");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
>> +{
>> + struct rpmsg_channel_info ns_chinfo;
>> + struct rpmsg_endpoint *ns_ept;
>> +
>> + ns_chinfo.src = RPMSG_NS_ADDR;
>> + ns_chinfo.dst = RPMSG_NS_ADDR;
>> + strcpy(ns_chinfo.name, "name_service");
>> +
>> + /*
>> + * Create the NS announcement service endpoint associated to the RPMsg
>> + * device. The endpoint will be automatically destroyed when the RPMsg
>> + * device will be deleted.
>> + */
>> + ns_ept = rpmsg_create_ept(rpdev, rpmsg_ns_cb, NULL, ns_chinfo);
>> + if (!ns_ept) {
>> + dev_err(&rpdev->dev, "failed to create the ns ept\n");
>> + return -ENOMEM;
>> + }
>> + rpdev->ept = ns_ept;
>> +
>> + return 0;
>> +}
>> +
>> +static struct rpmsg_driver rpmsg_ns_driver = {
>> + .drv.name = "rpmsg_ns",
>> + .probe = rpmsg_ns_probe,
>> +};
>> +
>> +static int rpmsg_ns_init(void)
>> +{
>> + int ret;
>> +
>> + ret = register_rpmsg_driver(&rpmsg_ns_driver);
>> + if (ret < 0)
>> + pr_err("%s: Failed to register rpmsg driver\n", __func__);
>> +
>> + return ret;
>> +}
>> +postcore_initcall(rpmsg_ns_init);
>> +
>> +static void rpmsg_ns_exit(void)
>> +{
>> + unregister_rpmsg_driver(&rpmsg_ns_driver);
>> +}
>> +module_exit(rpmsg_ns_exit);
>> +
>> +MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
>> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>");
>> +MODULE_ALIAS("rpmsg_ns");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.17.1
>>
