From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> The document defines the binding for a component that loads firmware for and boots the Qualcomm WCNSS core. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Changes since v1: - Dropped non-variable properties (crash reason, firmware name) - Split wcnss and iris definitions into separate nodes - Dropped qcom, prefix of regulator supplies (standard binding) - Interrupts and stop-state is made optional to support 8064 .../bindings/remoteproc/qcom,wcnss-pil.txt | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt new file mode 100644 index 000000000000..e317731ec0c8 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -0,0 +1,117 @@ +Qualcomm WCNSS Peripheral Image Loader + +This document defines the binding for a component that loads and boots firmware +on the Qualcomm WCNSS core. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,riva-pil", + "qcom,pronto-v1-pil", + "qcom,pronto-v2-pil" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: base address and size of riva/pronto PMU registers + +- interrupts-extended: + Usage: required + Value type: <prop-encoded-array> + Definition: must list the watchdog and fatal IRQs and may specify the + ready, handover and stop-ack IRQs + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: should be "wdog", "fatal", optionally followed by "ready", + "handover", "stop-ack" + +- vddmx-supply: +- vddcx-supply: +- vddpx-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the WCNSS core + +- qcom,state: + Usage: optional + Value type: <prop-encoded-array> + Definition: reference to the SMEM state used to indicate to WCNSS that + it should shut down + +- qcom,state-names: + Usage: optional + Value type: <stringlist> + Definition: should be "stop" + += SUBNODES +A single subnode of the WCNSS PIL describes the attached rf module and its +resource dependencies. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,wcn3620", + "qcom,wcn3660", + "qcom,wcn3680" + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the xo clock and optionally the rf clock + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: should be "xo", optionally followed by "rf" + +- vddxo-supply: +- vddrfa-supply: +- vddpa-supply: +- vdddig-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the WCNSS core + += EXAMPLE +The following example describes the resources needed to boot control the WCNSS, +with attached WCN3680, as it is commonly found on MSM8974 boards. + +pronto@fb21b000 { + compatible = "qcom,pronto-v2-pil"; + reg = <0xfb21b000 0x3000>; + + interrupts-extended = <&intc 0 149 1>, + <&wcnss_smp2p_slave 0 0>, + <&wcnss_smp2p_slave 1 0>, + <&wcnss_smp2p_slave 2 0>, + <&wcnss_smp2p_slave 3 0>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + qcom,state = <&wcnss_smp2p_out 0>; + qcom,state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>; + clock-names = "xo", "rf"; + + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; +}; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html