On 17/04/2020 19:21, Jason Gunthorpe wrote: > On Thu, Apr 16, 2020 at 10:05:11AM +0300, Gal Pressman wrote: >> On 08/04/2020 9:35, Gal Pressman wrote: >>> On 07/04/2020 21:06, Jason Gunthorpe wrote: >>>> On Tue, Apr 07, 2020 at 06:47:51PM +0300, Gal Pressman wrote: >>>>> I'm trying to build the azp image and it fails with the following error [1]. >>>>> Anyone has an idea what went wrong? >>>> >>>>> Reading package lists... >>>>> W: http://apt.llvm.org/bionic/dists/llvm-toolchain-bionic-8/InRelease: No system >>>>> certificates available. Try installing ca-certificates. >>>>> W: http://apt.llvm.org/bionic/dists/llvm-toolchain-bionic-8/Release: No system >>>>> certificates available. Try installing ca-certificates. >>>>> E: The repository 'http://apt.llvm.org/bionic llvm-toolchain-bionic-8 Release' >>>>> does not have a Release file. >>>> >>>> Oh, there is lots going wrong here.. >>>> >>>> Above is because llvm droped http support from their repo.. Bit >>>> annoying to fix.. >>>> >>>>> The following packages have unmet dependencies: >>>>> libc6-dev:arm64 : Depends: libc6:arm64 (= 2.27-3ubuntu1) but it is not going to >>>>> be installed >>>>> libgcc-8-dev:arm64 : Depends: libgcc1:arm64 (>= 1:8.4.0-1ubuntu1~18.04) >>>>> Depends: libgomp1:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> Depends: libitm1:arm64 (>= 8.4.0-1ubuntu1~18.04) but it is >>>>> not going to be installed >>>>> Depends: libatomic1:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> Depends: libasan5:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> Depends: liblsan0:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> Depends: libtsan0:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> Depends: libubsan1:arm64 (>= 8.4.0-1ubuntu1~18.04) but it >>>>> is not going to be installed >>>>> libnl-3-dev:arm64 : Depends: libnl-3-200:arm64 (= 3.2.29-0ubuntu3) but it is >>>>> not going to be installed >>>>> libnl-route-3-dev:arm64 : Depends: libnl-route-3-200:arm64 (= 3.2.29-0ubuntu3) >>>>> but it is not going to be installed >>>>> libsystemd-dev:arm64 : Depends: libsystemd0:arm64 (= 237-3ubuntu10.39) but it >>>>> is not going to be installed >>>>> libudev-dev:arm64 : Depends: libudev1:arm64 (= 237-3ubuntu10.39) but it is not >>>>> going to be installed >>>> >>>> Oh neat, that is a problem in the toolchain ppa: >>>> >>>> $ apt-get install libgcc-s1:arm64 gcc-7 >>>> >>>> The following packages have unmet dependencies: >>>> libgcc-s1:arm64 : Breaks: libgcc-7-dev (< 7.5.0-4) but 7.5.0-3ubuntu1~18.04 is to be installed >>>> >>>> The only ubuntu not broken right now is focal.. which is very new. >>>> >>>> Keep using the old docker image? Ask me in a week if it is still >>>> broken, we can probably fix this by updating to focal, it is the next >>>> LTS anyhow.. >>> >>> Thanks Jason, I'll keep tracking the issue. >> >> Looks like the issue persists :\. > > Are you sure? It seems fixed > > root@069a1ad800ba:/# apt-get install libgcc-s1:arm64 gcc-7 > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following additional packages will be installed: > binutils binutils-common binutils-x86-64-linux-gnu cpp-7 gcc-10-base gcc-10-base:arm64 gcc-7-base gcc-8-base libasan4 > libatomic1 libbinutils libc-dev-bin libc6:arm64 libc6-dev libcc1-0 libcilkrts5 libgcc-7-dev libgcc-s1 libgcc1 libgomp1 > libisl19 libitm1 liblsan0 libmpc3 libmpfr6 libmpx2 libquadmath0 libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages > manpages-dev > Suggested packages: > binutils-doc gcc-7-locales gcc-7-multilib gcc-7-doc libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg libasan4-dbg > liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg libquadmath0-dbg glibc-doc:arm64 locales:arm64 > glibc-doc man-browser > The following NEW packages will be installed: > binutils binutils-common binutils-x86-64-linux-gnu cpp-7 gcc-10-base gcc-10-base:arm64 gcc-7 gcc-7-base libasan4 > libatomic1 libbinutils libc-dev-bin libc6:arm64 libc6-dev libcc1-0 libcilkrts5 libgcc-7-dev libgcc-s1 libgcc-s1:arm64 > libgomp1 libisl19 libitm1 liblsan0 libmpc3 libmpfr6 libmpx2 libquadmath0 libtsan0 libubsan0 linux-libc-dev manpages > manpages-dev > The following packages will be upgraded: > gcc-8-base libgcc1 libstdc++6 > 3 upgraded, 32 newly installed, 0 to remove and 9 not upgraded. > Need to get 35.2 MB of archives. > After this operation, 131 MB of additional disk space will be used. > Do you want to continue? [Y/n] > > I will look more later The error is different now, ends up with: debconf: delaying package configuration, since apt-utils is not installed Fetched 328 MB in 4s (80.9 MB/s) Selecting previously unselected package gcc-10-base:amd64. (Reading database ... 4046 files and directories currently installed.) Preparing to unpack .../gcc-10-base_10-20200416-0ubuntu1~18.04_amd64.deb ... Unpacking gcc-10-base:amd64 (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package gcc-10-base:i386. Preparing to unpack .../gcc-10-base_10-20200416-0ubuntu1~18.04_i386.deb ... Unpacking gcc-10-base:i386 (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package gcc-10-base:ppc64el. Preparing to unpack .../gcc-10-base_10-20200416-0ubuntu1~18.04_ppc64el.deb ... Unpacking gcc-10-base:ppc64el (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package gcc-10-base:arm64. Preparing to unpack .../gcc-10-base_10-20200416-0ubuntu1~18.04_arm64.deb ... Unpacking gcc-10-base:arm64 (10-20200416-0ubuntu1~18.04) ... Setting up gcc-10-base:amd64 (10-20200416-0ubuntu1~18.04) ... Setting up gcc-10-base:i386 (10-20200416-0ubuntu1~18.04) ... Setting up gcc-10-base:ppc64el (10-20200416-0ubuntu1~18.04) ... Setting up gcc-10-base:arm64 (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package libgcc-s1:amd64. (Reading database ... 4054 files and directories currently installed.) Preparing to unpack .../libgcc-s1_10-20200416-0ubuntu1~18.04_amd64.deb ... Unpacking libgcc-s1:amd64 (10-20200416-0ubuntu1~18.04) ... Replacing files in old package libgcc1:amd64 (1:8.3.0-26ubuntu1~18.04) ... Selecting previously unselected package libgcc-s1:i386. Preparing to unpack .../libgcc-s1_10-20200416-0ubuntu1~18.04_i386.deb ... Unpacking libgcc-s1:i386 (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package libgcc-s1:ppc64el. Preparing to unpack .../libgcc-s1_10-20200416-0ubuntu1~18.04_ppc64el.deb ... Unpacking libgcc-s1:ppc64el (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package libgcc-s1:arm64. Preparing to unpack .../libgcc-s1_10-20200416-0ubuntu1~18.04_arm64.deb ... Unpacking libgcc-s1:arm64 (10-20200416-0ubuntu1~18.04) ... Setting up libgcc-s1:amd64 (10-20200416-0ubuntu1~18.04) ... Selecting previously unselected package libc6:i386. (Reading database ... 4062 files and directories currently installed.) Preparing to unpack .../libc6_2.27-3ubuntu1_i386.deb ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Unpacking libc6:i386 (2.27-3ubuntu1) ... Selecting previously unselected package libc6:ppc64el. Preparing to unpack .../libc6_2.27-3ubuntu1_ppc64el.deb ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Unpacking libc6:ppc64el (2.27-3ubuntu1) ... Selecting previously unselected package libc6:arm64. Preparing to unpack .../libc6_2.27-3ubuntu1_arm64.deb ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Unpacking libc6:arm64 (2.27-3ubuntu1) ... dpkg: dependency problems prevent configuration of libc6:i386: libc6:i386 depends on libgcc1; however: Package libgcc-s1:i386 which provides libgcc1 is not configured yet. dpkg: error processing package libc6:i386 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgcc-s1:ppc64el: libgcc-s1:ppc64el depends on libc6 (>= 2.17); however: Package libc6:ppc64el is not configured yet. dpkg: error processing package libgcc-s1:ppc64el (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libc6:i386 libgcc-s1:ppc64el E: Sub-process /usr/bin/dpkg returned an error code (1) The command '/bin/sh -c apt-get update; apt-get install -y --no-install-recommends abi-compliance-checker abi-dumper ca-certificates clang-9 cmake cython3 debhelper dh-systemd dpkg-dev fakeroot gcc-8-aarch64-linux-gnu gcc-8-powerpc64le-linux-gnu gcc-9 git libc6-dev libc6-dev:arm64 libc6-dev:i386 libc6-dev:ppc64el libgcc-8-dev:arm64 libgcc-8-dev:ppc64el libgcc-9-dev:i386 libnl-3-dev libnl-3-dev:arm64 libnl-3-dev:i386 libnl-3-dev:ppc64el libnl-route-3-dev libnl-route-3-dev:arm64 libnl-route-3-dev:i386 libnl-route-3-dev:ppc64el libsystemd-dev libsystemd-dev:arm64 libsystemd-dev:i386 libsystemd-dev:ppc64el libudev-dev libudev-dev:arm64 libudev-dev:i386 libudev-dev:ppc64el lintian make ninja-build pandoc pkg-config python2.7 python3 python3-dev python3-docutils python3-yaml sparse valgrind && apt-get clean && rm -rf /usr/share/doc/ /usr/lib/debug /var/lib/apt/lists/' returned a non-zero code: 100 Traceback (most recent call last): File "./buildlib/cbuild", line 1138, in <module> args.func(args); File "./buildlib/cbuild", line 1042, in cmd_build_images docker_cmd(args,*opts); File "./buildlib/cbuild", line 559, in docker_cmd return subprocess.check_call(["sudo","docker"] + cmd); File "/usr/lib64/python3.7/subprocess.py", line 347, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['sudo', 'docker', 'build', '--pull', '-f', '/tmp/tmpzku61wlq/Dockerfile', '-t', 'ucfconsort.azurecr.io/rdma-core/azure_pipelines:28.0', '/tmp/tmpzku61wlq']' returned non-zero exit status 100.
