On Tue, Dec 04, 2018 at 02:04:24PM +0200, Gal Pressman wrote:
> + if (unlikely(read_resp->req_id != mmio_read->seq_num)) {
> + pr_err("Reading register timed out. expected: req id[%u] offset[%#x] actual: req id[%u] offset[%#x]\n",
> + mmio_read->seq_num, offset, read_resp->req_id,
> + read_resp->reg_off);
every use of pr_err/pr_debug/etc I saw should be a
dev_err/dev/debug/etc in this driver.
> + pr_debug("init cq dma_addr....\n");
Please don't upstream so many wonky pr_debugs...
Jason
