On Tue, 2018-10-16 at 22:00 +0300, Leon Romanovsky wrote:
> On Tue, Oct 16, 2018 at 02:39:01PM -0400, Doug Ledford wrote:
> > On Tue, 2018-10-09 at 12:05 +0300, Leon Romanovsky wrote:
> > > From: Leon Romanovsky <leonro@xxxxxxxxxxxx>
> > >
> > > Changelog v0->v1:
> > > * Changed patch #3 to use check_mask function from rdma-core instead define.
> > >
> > > --------------------------------------------------------------------------
> > > From Yonatan,
> > >
> > > Scatter to CQE is a HW offload feature that saves PCI writes by
> > > scattering the payload to the CQE.
> > >
> > > The feature depends on the CQE size and if the CQE size is 64B, it will
> > > work for payload smaller than 32. If the CQE size is 128B, it will work for
> > > payload smaller than 64.
> > >
> > > The feature works for responder and requestor:
> > > 1. For responder, if the payload is small as required above, the data
> > > will be part of the CQE, and thus we save another PCI transaction the recv buffers.
> > > 2. For requestor, this can be used to get the RDMA_READ response and
> > > RDMA_ATOMIC response in the CQE. This feature is already supported in upstream.
> > >
> > > As part of this series, we are adding support for DC transport type and
> > > ability to enable the feature (force enable) in the requestor when SQ
> > > is not configured to signal all WRs.
> > >
> > > Thanks
> > >
> > > Yonatan Cohen (4):
> > > net/mlx5: Expose DC scatter to CQE capability bit
> > > IB/mlx5: Support scatter to CQE for DC transport type
> > > IB/mlx5: Verify that driver supports user flags
> > > IB/mlx5: Allow scatter to CQE without global signaled WRs
> > >
> > > drivers/infiniband/hw/mlx5/cq.c | 2 +-
> > > drivers/infiniband/hw/mlx5/mlx5_ib.h | 2 +-
> > > drivers/infiniband/hw/mlx5/qp.c | 93 ++++++++++++++++++++++++++++--------
> > > include/linux/mlx5/mlx5_ifc.h | 3 +-
> > > include/uapi/rdma/mlx5-abi.h | 1 +
> > > 5 files changed, 79 insertions(+), 22 deletions(-)
> > >
> > > --
> > > 2.14.4
> > >
> >
> >
> > Hi Leon,
> >
> > This series looks fine. Let me know when the net/mlx5 portion has been
> > committed.
>
> Thanks Doug,
> I pushed first patch to mlx5-next
> 94a04d1d3d36 ("net/mlx5: Expose DC scatter to CQE capability bit")
Thanks Leon, mlx5-next merged in, then remainder of series applied to
for-next.
--
Doug Ledford <dledford@xxxxxxxxxx>
GPG KeyID: B826A3330E572FDD
Key fingerprint = AE6B 1BDA 122B 23B4 265B 1274 B826 A333 0E57 2FDD
Attachment:
signature.asc
Description: This is a digitally signed message part
