On Tue, May 15, 2018 at 06:31:39PM -0700, Dennis Dalessandro wrote:
> From: Alex Estrin <alex.estrin@xxxxxxxxx>
>
> The following error message occurs on a target host in a debug build
> during session login:
>
> [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0
> [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes]
> ......snip .....
>
> [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1
> [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015
> [ 3524.555740] Call Trace:
> [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b
> [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100
> [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80
> [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0
> [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0
> [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90
> [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20
> [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80
> [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140
> [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert]
> [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert]
> [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430
> [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod]
> [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod]
> [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60
> [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod]
> [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod]
> [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
> [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
> [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod]
> [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100
> [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
> [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21
> [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
> [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]---
> [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
>
> The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it
> with dma-mapped address.
> login_tx_desc is a part of iser_conn structure and is used only once
> during login negotiation, so the issue is fixed by eliminating
> dma_sync call for this buffer using a special case routine.
>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@xxxxxxxxx>
> Reviewed-by: Don Dutile <ddutile@xxxxxxxxxx>
> Signed-off-by: Alex Estrin <alex.estrin@xxxxxxxxx>
> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxx>
> ---
> drivers/infiniband/ulp/isert/ib_isert.c | 26 +++++++++++++++++---------
> 1 files changed, 17 insertions(+), 9 deletions(-)
This sounds like -rc material? Why is it for-next?
> diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
> index fff40b0..6a55b87 100644
> --- a/drivers/infiniband/ulp/isert/ib_isert.c
> +++ b/drivers/infiniband/ulp/isert/ib_isert.c
> @@ -886,15 +886,9 @@
> }
>
> static void
> -isert_create_send_desc(struct isert_conn *isert_conn,
> - struct isert_cmd *isert_cmd,
> - struct iser_tx_desc *tx_desc)
> +__isert_create_send_desc(struct isert_device *device,
> + struct iser_tx_desc *tx_desc)
> {
> - struct isert_device *device = isert_conn->device;
> - struct ib_device *ib_dev = device->ib_device;
> -
> - ib_dma_sync_single_for_cpu(ib_dev, tx_desc->dma_addr,
> - ISER_HEADERS_LEN, DMA_TO_DEVICE);
>
> memset(&tx_desc->iser_header, 0, sizeof(struct iser_ctrl));
> tx_desc->iser_header.flags = ISCSI_CTRL;
> @@ -907,6 +901,20 @@
> }
> }
>
> +static void
> +isert_create_send_desc(struct isert_conn *isert_conn,
> + struct isert_cmd *isert_cmd,
> + struct iser_tx_desc *tx_desc)
> +{
> + struct isert_device *device = isert_conn->device;
> + struct ib_device *ib_dev = device->ib_device;
> +
> + ib_dma_sync_single_for_cpu(ib_dev, tx_desc->dma_addr,
> + ISER_HEADERS_LEN, DMA_TO_DEVICE);
> +
> + __isert_create_send_desc(device, tx_desc);
> +}
> +
> static int
> isert_init_tx_hdrs(struct isert_conn *isert_conn,
> struct iser_tx_desc *tx_desc)
> @@ -994,7 +1002,7 @@
> struct iser_tx_desc *tx_desc = &isert_conn->login_tx_desc;
> int ret;
>
> - isert_create_send_desc(isert_conn, NULL, tx_desc);
> + __isert_create_send_desc(device, tx_desc);
>
> memcpy(&tx_desc->iscsi_header, &login->rsp[0],
> sizeof(struct iscsi_hdr));
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
