On 4/26/2017 6:10 PM, Laurence Oberman wrote:
----- Original Message -----
From: "Laurence Oberman" <loberman@xxxxxxxxxx>
To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
<dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
linux-rdma@xxxxxxxxxxxxxxx
Sent: Wednesday, April 26, 2017 9:50:25 AM
Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[] array
----- Original Message -----
From: "Laurence Oberman" <loberman@xxxxxxxxxx>
To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
<bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
<dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin"
<israelr@xxxxxxxxxxxx>,
linux-rdma@xxxxxxxxxxxxxxx
Sent: Wednesday, April 26, 2017 9:28:37 AM
Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
overflows the klms[] array
----- Original Message -----
From: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
To: "Laurence Oberman" <loberman@xxxxxxxxxx>
Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
<bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
<dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel
Rukshin"
<israelr@xxxxxxxxxxxx>,
linux-rdma@xxxxxxxxxxxxxxx
Sent: Wednesday, April 26, 2017 8:25:30 AM
Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
overflows the klms[] array
On 4/26/2017 3:18 PM, Laurence Oberman wrote:
----- Original Message -----
From: "Laurence Oberman" <loberman@xxxxxxxxxx>
To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
<bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
<dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel
Rukshin" <israelr@xxxxxxxxxxxx>,
linux-rdma@xxxxxxxxxxxxxxx
Sent: Wednesday, April 26, 2017 7:47:37 AM
Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
overflows the klms[] array
----- Original Message -----
From: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
To: "Laurence Oberman" <loberman@xxxxxxxxxx>, "Leon Romanovsky"
<leonro@xxxxxxxxxxxx>
Cc: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
<dledford@xxxxxxxxxx>, "Sagi Grimberg"
<sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
linux-rdma@xxxxxxxxxxxxxxx
Sent: Wednesday, April 26, 2017 4:31:57 AM
Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
overflows the klms[] array
On 4/25/2017 11:37 PM, Laurence Oberman wrote:
----- Original Message -----
From: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>
To: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>
Cc: "Doug Ledford" <dledford@xxxxxxxxxx>, "Max Gurtovoy"
<maxg@xxxxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>,
"Israel Rukshin" <israelr@xxxxxxxxxxxx>, "Laurence Oberman"
<loberman@xxxxxxxxxx>, linux-rdma@xxxxxxxxxxxxxxx
Sent: Tuesday, April 25, 2017 1:58:49 PM
Subject: Re: [PATCH, untested] mlx5: Avoid that
mlx5_ib_sg_to_klms()
overflows the klms[] array
On Mon, Apr 24, 2017 at 03:15:28PM -0700, Bart Van Assche wrote:
ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger
than what fits into a single MR. .map_mr_sg() must not attempt to
map more SG-list elements than what fits into a single MR.
Hence make sure that mlx5_ib_sg_to_klms() does not write outside
the MR klms[] array.
Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support")
Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
Reviewed-by: Max Gurtovoy <maxg@xxxxxxxxxxxx>
Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
Cc: Leon Romanovsky <leonro@xxxxxxxxxxxx>
Cc: Israel Rukshin <israelr@xxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
drivers/infiniband/hw/mlx5/mr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Bart,
Thanks a lot, it indeed looks right.
Acked-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
Thanks
Hello Bart, Leon, Max and Israel.
I cloned off Barts tree.
git clone https://github.com/bvanassche/linux
cd linux
git checkout block-scsi-for-next
I checked all patches were in for this test.
a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS
dfa5a2b mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[]
array
f759c80 mlx5: Fix mlx5_ib_map_mr_sg mr lengt
Hi,
copying Sagi's request from different thread:
"
Can you please enable srp_add_one debug:
echo "func srp_add_one +p" > /sys/kernel/debug/dynamic_debug/control
In addition apply the following:
--
diff --git a/drivers/infiniband/hw/mlx5/mr.c
b/drivers/infiniband/hw/mlx5/mr.c
index d9c6c0ea750b..040fbc387e4f 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -1403,6 +1403,8 @@ mlx5_alloc_priv_descs(struct ib_device *device,
int add_size;
int ret;
+ WARN_ON_ONCE(ndescs >
device->attr.max_fast_reg_page_list_len);
+
add_size = max_t(int, MLX5_UMR_ALIGN -
ARCH_KMALLOC_MINALIGN,
0);
mr->descs_alloc = kzalloc(size + add_size, GFP_KERNEL);
"
Max.
Built and tested the kernel.
However this issue is not resolved :(
[ 2707.931909] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817edca86b0
[ 2708.089806] mlx5_0:dump_cqe:262:(pid 20129): dump error cqe
[ 2708.121342] 00000000 00000000 00000000 00000000
[ 2708.147104] 00000000 00000000 00000000 00000000
[ 2708.172633] 00000000 00000000 00000000 00000000
[ 2708.198702] 00000000 0f007806 2500002a 14a527d0
[ 2732.434127] scsi host1: ib_srp: reconnect succeeded
[ 2733.048023] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817ed0a9c30
[root@localhost ~]# [ 2746.413277] mlx5_0:dump_cqe:262:(pid 15877):
dump
error cqe
[ 2746.443240] 00000000 00000000 00000000 00000000
[ 2746.469323] 00000000 00000000 00000000 00000000
[ 2746.495310] 00000000 00000000 00000000 00000000
[ 2746.521407] 00000000 0f007806 25000032 003c7ad0
[ 2752.445899] scsi host1: ib_srp: reconnect succeeded
[ 2752.481835] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817ed0a9cf0
[ 2763.267386] mlx5_0:dump_cqe:262:(pid 15877): dump error cqe
[ 2763.297826] 00000000 00000000 00000000 00000000
[ 2763.323352] 00000000 00000000 00000000 00000000
[ 2763.348722] 00000000 00000000 00000000 00000000
[ 2763.374681] 00000000 0f007806 2500003a 00084bd0
[root@localhost ~]# [ 2769.385203] fast_io_fail_tmo expired for SRP
port-1:1 / host1.
[ 2769.415956] scsi host1: ib_srp: reconnect succeeded
[ 2769.450258] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817ed0a9cf0
[ 2780.064627] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
[ 2780.093520] 00000000 00000000 00000000 00000000
[ 2780.120067] 00000000 00000000 00000000 00000000
[ 2780.145575] 00000000 00000000 00000000 00000000
[ 2780.171153] 00000000 0f007806 25000042 000833d0
[ 2785.923399] scsi host1: ib_srp: reconnect succeeded
[ 2785.957504] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817ed0a9cf0
[ 2796.463426] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
[ 2796.495257] 00000000 00000000 00000000 00000000
[ 2796.521506] 00000000 00000000 00000000 00000000
[ 2796.547640] 00000000 00000000 00000000 00000000
[ 2796.573120] 00000000 0f007806 2500004a 00083bd0
[ 2802.562578] scsi host1: ib_srp: reconnect succeeded
[ 2802.596880] scsi host1: ib_srp: failed RECV status WR flushed (5)
for
CQE ffff8817ed0a9cf0
Regards
Laurence
Doing this now
Thanks
Laurence
Max
The Patch is not correct.
drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_alloc_priv_descs':
drivers/infiniband/hw/mlx5/mr.c:1406:30: error: 'struct ib_device' has
no
member named 'attr'
WARN_ON_ONCE(ndescs > device->attr.max_fast_reg_page_list_len);
^
./include/asm-generic/bug.h:117:27: note: in definition of macro
'WARN_ON_ONCE'
int __ret_warn_once = !!(condition); \
I think you meant to give me
WARN_ON_ONCE(ndescs > ib_device_attr->attr.max_fast_reg_page_list_len);
Can you confirm
Hi Laurence,
should be device->attrs.max_fast_reg_page_list_len.
please check this one that might solve the issue (on top of everything):
diff --git a/drivers/infiniband/hw/mlx5/mr.c
b/drivers/infiniband/hw/mlx5/mr.c
index b8f9382..063d116 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -1559,7 +1559,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
mr->max_descs = ndescs;
} else if (mr_type == IB_MR_TYPE_SG_GAPS) {
mr->access_mode = MLX5_MKC_ACCESS_MODE_KLMS;
-
+ MLX5_SET(mkc, mkc, translations_octword_size,
ALIGN(max_num_sg + 1, 4));
err = mlx5_alloc_priv_descs(pd->device, mr,
ndescs, sizeof(struct
mlx5_klm));
if (err)
thanks,
Max.
Thanks
Laurence
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Max
I have the corrected WARN_ON_ONCE patch and the above patch as well as the
rest as it was from Barts tree.
Still fails.
For a baseline I can revert
a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS
Then test again to make sure we are starting from a good place.
Initiator log
[ 280.481951] scsi host1: ib_srp: failed FAST REG status memory management
operation error (6) for CQE ffff8817d9a881b8
[ 301.149106] scsi host1: ib_srp: reconnect succeeded
[ 301.280635] scsi host1: ib_srp: failed RECV status WR flushed (5) for
CQE
ffff8817ed32f2f0
[ 334.596420] scsi host2: ib_srp: failed RECV status WR flushed (5) for
CQE
ffff8817c592c970
[ 334.599689] mlx5_1:dump_cqe:262:(pid 20): dump error cqe
[ 334.599691] 00000000 00000000 00000000 00000000
[ 334.599692] 00000000 00000000 00000000 00000000
[ 334.599692] 00000000 00000000 00000000 00000000
[ 334.599693] 00000000 0f007806 2500002d 067b48d0
[ 334.599697] scsi host2: ib_srp: failed FAST REG status memory management
operation error (6) for CQE ffff8817c6e30078
[ 336.117248] mlx5_0:dump_cqe:262:(pid 130): dump error cqe
[ 336.145840] 00000000 00000000 00000000 00000000
[ 336.171830] 00000000 00000000 00000000 00000000
[ 336.197688] 00000000 00000000 00000000 00000000
[ 336.223720] 00000000 0f007806 25000032 005408d0
[ 339.712706] fast_io_fail_tmo expired for SRP port-1:1 / host1.
[ 341.453634] scsi host1: ib_srp: reconnect succeeded
[ 341.481600] mlx5_0:dump_cqe:262:(pid 130): dump error cqe
[ 341.482145] scsi host1: ib_srp: failed RECV status WR flushed (5) for
CQE
ffff8817ecaf6970
[ 341.559359] 00000000 00000000 00000000 00000000
[ 341.585397] 00000000 00000000 00000000 00000000
[ 341.610948] 00000000 00000000 00000000 00000000
[ 341.637515] 00000000 0f007806 2500003d 000046d0
[ 342.297598] sd 1:0:0:9: rejecting I/O to offline device
[ 342.297936] sd 1:0:0:9: [sdg] tag#28 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.297941] sd 1:0:0:9: [sdg] tag#28 CDB: Write(10) 2a 00 00 00 40 00 00
40 00 00
[ 342.297943] blk_update_request: recoverable transport error, dev sdg,
sector 16384
[ 342.297951] sd 1:0:0:20: [sdar] tag#5 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.297952] sd 1:0:0:20: [sdar] tag#15 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.297956] sd 1:0:0:20: [sdar] tag#5 CDB: Write(10) 2a 00 00 03 c0 00
00
40 00 00
[ 342.297956] sd 1:0:0:20: [sdar] tag#15 CDB: Write(10) 2a 00 00 2c c0 00
00
40 00 00
[ 342.297958] blk_update_request: recoverable transport error, dev sdar,
sector 245760
[ 342.297959] blk_update_request: recoverable transport error, dev sdar,
sector 2932736
[ 342.298119] device-mapper: multipath: Failing path 8:96.
[ 342.298266] sd 1:0:0:9: [sdg] tag#29 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298268] sd 1:0:0:9: [sdg] tag#29 CDB: Write(10) 2a 00 00 00 c0 00 00
40 00 00
[ 342.298269] blk_update_request: recoverable transport error, dev sdg,
sector 49152
[ 342.298300] device-mapper: multipath: Failing path 66:176.
[ 342.298486] sd 1:0:0:20: [sdar] tag#16 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298488] sd 1:0:0:20: [sdar] tag#6 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298489] sd 1:0:0:20: [sdar] tag#16 CDB: Write(10) 2a 00 00 2d 40 00
00
40 00 00
[ 342.298490] sd 1:0:0:20: [sdar] tag#6 CDB: Write(10) 2a 00 00 04 40 00
00
40 00 00
[ 342.298491] blk_update_request: recoverable transport error, dev sdar,
sector 2965504
[ 342.298492] blk_update_request: recoverable transport error, dev sdar,
sector 278528
[ 342.298582] sd 1:0:0:9: [sdg] tag#30 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298584] sd 1:0:0:9: [sdg] tag#30 CDB: Write(10) 2a 00 00 01 40 00 00
40 00 00
[ 342.298585] blk_update_request: recoverable transport error, dev sdg,
sector 81920
[ 342.298889] sd 1:0:0:9: [sdg] tag#31 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298890] sd 1:0:0:9: [sdg] tag#31 CDB: Write(10) 2a 00 00 01 c0 00 00
40 00 00
[ 342.298891] blk_update_request: recoverable transport error, dev sdg,
sector 114688
[ 342.298981] sd 1:0:0:20: [sdar] tag#7 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.298983] sd 1:0:0:20: [sdar] tag#7 CDB: Write(10) 2a 00 00 04 c0 00
00
40 00 00
[ 342.298985] blk_update_request: recoverable transport error, dev sdar,
sector 311296
[ 342.299004] sd 1:0:0:20: [sdar] tag#17 FAILED Result:
hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
[ 342.299007] sd 1:0:0:20: [sdar] tag#17 CDB: Write(10) 2a 00 00 34 c0 00
00
40 00 00
[ 342.299009] blk_update_request: recoverable transport error, dev sdar,
sector 3457024
[ 342.356353] device-mapper: multipath: Failing path 8:64.
[ 342.356489] device-mapper: multipath: Failing path 8:128.
[ 342.356628] device-mapper: multipath: Failing path 8:160.
[ 342.356699] device-mapper: multipath: Failing path 8:176.
[ 342.356767] device-mapper: multipath: Failing path 8:240.
[ 342.356834] device-mapper: multipath: Failing path 8:208.
[ 342.356900] device-mapper: multipath: Failing path 65:16.
[ 342.356967] device-mapper: multipath: Failing path 65:64.
[ 342.357035] device-mapper: multipath: Failing path 65:96.
[ 342.357103] device-mapper: multipath: Failing path 65:128.
[ 342.357169] device-mapper: multipath: Failing path 65:176.
[ 342.357237] device-mapper: multipath: Failing path 65:208.
[ 342.357303] device-mapper: multipath: Failing path 65:224.
[ 342.357371] device-mapper: multipath: Failing path 66:0.
[ 342.357454] device-mapper: multipath: Failing path 66:32.
[ 342.357521] device-mapper: multipath: Failing path 66:48.
[ 342.357647] device-mapper: multipath: Failing path 66:80.
[ 342.357714] device-mapper: multipath: Failing path 66:112.
[ 342.357781] device-mapper: multipath: Failing path 66:144.
[ 342.357936] device-mapper: multipath: Failing path 66:208.
[ 342.358019] device-mapper: multipath: Failing path 66:240.
[ 342.358115] device-mapper: multipath: Failing path 67:16.
[ 342.358183] device-mapper: multipath: Failing path 67:48.
[ 342.358264] device-mapper: multipath: Failing path 67:80.
[ 342.358359] device-mapper: multipath: Failing path 67:128.
[ 342.358442] device-mapper: multipath: Failing path 67:160.
[ 342.358594] device-mapper: multipath: Failing path 67:224.
[ 342.358671] device-mapper: multipath: Failing path 67:208.
[ 350.157728] scsi host2: ib_srp: reconnect succeeded
[ 350.189605] mlx5_1:dump_cqe:262:(pid 4756): dump error cqe
[ 350.193180] mlx5_1:dump_cqe:262:(pid 1275): dump error cqe
[ 350.193182] 00000000 00000000 00000000 00000000
[ 350.193182] 00000000 00000000 00000000 00000000
[ 350.193183] 00000000 00000000 00000000 00000000
[ 350.193183] 00000000 0f007806 25000035 04f569d0
[ 350.193187] scsi host2: ib_srp: failed FAST REG status memory management
operation error (6) for CQE ffff8817c6e30078
[ 350.412637] 00000000 00000000 00000000 00000000
[ 350.436431] 00000000 00000000 00000000 00000000
[ 350.461871] 00000000 00000000 00000000 00000000
[ 350.487549] 00000000 0f007806 25000032 000843d0
Target Log
Thee events happened after the first failures on the initiator
[ 1111.029847] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-49.
[ 1111.078815] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-48.
[ 1111.127420] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-47.
[ 1111.175801] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-46.
[ 1111.223725] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-45.
[ 1111.271957] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-44.
[ 1111.319494] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-43.
[ 1111.365795] ib_srpt Received CM TimeWait exit for ch
0x4f6e72000390fe7c7cfe900300726ed3-42.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Max
These are the parameters all my tests run with.
Same as always.
[root@localhost modprobe.d]# cat ib_srp.conf
options ib_srp cmd_sg_entries=255 indirect_sg_entries=2048
I dont set prefer_fr so it defaults to Y
[root@localhost parameters]# cat prefer_fr
Y
I have no settings for mlx5_core, all defaults.
Thanks
Laurence
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Max,
Reverting a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS on the same source tree with all esle applied I am stable.
So clearly we still have issues with IB_MR_TYPE_SG_GAPS.
Thanks
Laurence
Hi Laurence,
I would like to see the prints that Sagi asked in the srp_add_one
function (echo "func srp_add_one +p" >
/sys/kernel/debug/dynamic_debug/control) and also prints from
srp_create_target (echo "func srp_create_target +p" >
/sys/kernel/debug/dynamic_debug/control).
another patch can help is:
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c
b/drivers/infiniband/ulp/srp/ib_srp.c
index cee4626..53a67fd 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -3387,6 +3387,10 @@ static ssize_t srp_create_target(struct device *dev,
sizeof (struct srp_indirect_buf) +
target->cmd_sg_cnt * sizeof (struct
srp_direct_buf);
+ pr_info("sg_tablesize %u mr_pool_size %u mr_per_cmd %u
indirect_size %u max_iu_len %u max_sectors %u\n",
+ target->sg_tablesize, target->mr_pool_size,
target->mr_per_cmd, target->indirect_size,
+ target->max_iu_len, target->scsi_host->max_sectors);
+
INIT_WORK(&target->tl_err_work, srp_tl_err_work);
INIT_WORK(&target->remove_work, srp_remove_work);
spin_lock_init(&target->lock);
please add also the SG_GAPS Reenable commit and let's repro it again.
BTW, how many channels are open ?
can you load ib_srp module with ch_count param changes from 4 to
#num_cpus and let's see when we get to repro it again.
thanks,
Max.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
