----- Original Message -----
> From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> <dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
> linux-rdma@xxxxxxxxxxxxxxx
> Sent: Wednesday, April 26, 2017 9:28:37 AM
> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[] array
>
>
>
> ----- Original Message -----
> > From: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> > To: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
> > <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> > <dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin"
> > <israelr@xxxxxxxxxxxx>,
> > linux-rdma@xxxxxxxxxxxxxxx
> > Sent: Wednesday, April 26, 2017 8:25:30 AM
> > Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > overflows the klms[] array
> >
> >
> >
> > On 4/26/2017 3:18 PM, Laurence Oberman wrote:
> > >
> > >
> > > ----- Original Message -----
> > >> From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > >> To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> > >> Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
> > >> <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> > >> <dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel
> > >> Rukshin" <israelr@xxxxxxxxxxxx>,
> > >> linux-rdma@xxxxxxxxxxxxxxx
> > >> Sent: Wednesday, April 26, 2017 7:47:37 AM
> > >> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > >> overflows the klms[] array
> > >>
> > >>
> > >>
> > >> ----- Original Message -----
> > >>> From: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> > >>> To: "Laurence Oberman" <loberman@xxxxxxxxxx>, "Leon Romanovsky"
> > >>> <leonro@xxxxxxxxxxxx>
> > >>> Cc: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> > >>> <dledford@xxxxxxxxxx>, "Sagi Grimberg"
> > >>> <sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
> > >>> linux-rdma@xxxxxxxxxxxxxxx
> > >>> Sent: Wednesday, April 26, 2017 4:31:57 AM
> > >>> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > >>> overflows the klms[] array
> > >>>
> > >>>
> > >>>
> > >>> On 4/25/2017 11:37 PM, Laurence Oberman wrote:
> > >>>>
> > >>>>
> > >>>> ----- Original Message -----
> > >>>>> From: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>
> > >>>>> To: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>
> > >>>>> Cc: "Doug Ledford" <dledford@xxxxxxxxxx>, "Max Gurtovoy"
> > >>>>> <maxg@xxxxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>,
> > >>>>> "Israel Rukshin" <israelr@xxxxxxxxxxxx>, "Laurence Oberman"
> > >>>>> <loberman@xxxxxxxxxx>, linux-rdma@xxxxxxxxxxxxxxx
> > >>>>> Sent: Tuesday, April 25, 2017 1:58:49 PM
> > >>>>> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > >>>>> overflows the klms[] array
> > >>>>>
> > >>>>> On Mon, Apr 24, 2017 at 03:15:28PM -0700, Bart Van Assche wrote:
> > >>>>>> ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger
> > >>>>>> than what fits into a single MR. .map_mr_sg() must not attempt to
> > >>>>>> map more SG-list elements than what fits into a single MR.
> > >>>>>> Hence make sure that mlx5_ib_sg_to_klms() does not write outside
> > >>>>>> the MR klms[] array.
> > >>>>>>
> > >>>>>> Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support")
> > >>>>>> Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
> > >>>>>> Reviewed-by: Max Gurtovoy <maxg@xxxxxxxxxxxx>
> > >>>>>> Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
> > >>>>>> Cc: Leon Romanovsky <leonro@xxxxxxxxxxxx>
> > >>>>>> Cc: Israel Rukshin <israelr@xxxxxxxxxxxx>
> > >>>>>> Cc: <stable@xxxxxxxxxxxxxxx>
> > >>>>>> ---
> > >>>>>> drivers/infiniband/hw/mlx5/mr.c | 2 +-
> > >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
> > >>>>>>
> > >>>>>
> > >>>>> Bart,
> > >>>>>
> > >>>>> Thanks a lot, it indeed looks right.
> > >>>>> Acked-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
> > >>>>>
> > >>>>> Thanks
> > >>>>>
> > >>>>
> > >>>>
> > >>>> Hello Bart, Leon, Max and Israel.
> > >>>>
> > >>>> I cloned off Barts tree.
> > >>>>
> > >>>> git clone https://github.com/bvanassche/linux
> > >>>> cd linux
> > >>>> git checkout block-scsi-for-next
> > >>>>
> > >>>> I checked all patches were in for this test.
> > >>>>
> > >>>> a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS
> > >>>> dfa5a2b mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[]
> > >>>> array
> > >>>> f759c80 mlx5: Fix mlx5_ib_map_mr_sg mr lengt
> > >>>
> > >>> Hi,
> > >>> copying Sagi's request from different thread:
> > >>>
> > >>> "
> > >>> Can you please enable srp_add_one debug:
> > >>>
> > >>> echo "func srp_add_one +p" > /sys/kernel/debug/dynamic_debug/control
> > >>>
> > >>> In addition apply the following:
> > >>> --
> > >>> diff --git a/drivers/infiniband/hw/mlx5/mr.c
> > >>> b/drivers/infiniband/hw/mlx5/mr.c
> > >>> index d9c6c0ea750b..040fbc387e4f 100644
> > >>> --- a/drivers/infiniband/hw/mlx5/mr.c
> > >>> +++ b/drivers/infiniband/hw/mlx5/mr.c
> > >>> @@ -1403,6 +1403,8 @@ mlx5_alloc_priv_descs(struct ib_device *device,
> > >>> int add_size;
> > >>> int ret;
> > >>>
> > >>> + WARN_ON_ONCE(ndescs > device->attr.max_fast_reg_page_list_len);
> > >>> +
> > >>> add_size = max_t(int, MLX5_UMR_ALIGN - ARCH_KMALLOC_MINALIGN,
> > >>> 0);
> > >>>
> > >>> mr->descs_alloc = kzalloc(size + add_size, GFP_KERNEL);
> > >>>
> > >>> "
> > >>>
> > >>> Max.
> > >>>
> > >>>>
> > >>>> Built and tested the kernel.
> > >>>>
> > >>>> However this issue is not resolved :(
> > >>>>
> > >>>> [ 2707.931909] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817edca86b0
> > >>>> [ 2708.089806] mlx5_0:dump_cqe:262:(pid 20129): dump error cqe
> > >>>> [ 2708.121342] 00000000 00000000 00000000 00000000
> > >>>> [ 2708.147104] 00000000 00000000 00000000 00000000
> > >>>> [ 2708.172633] 00000000 00000000 00000000 00000000
> > >>>> [ 2708.198702] 00000000 0f007806 2500002a 14a527d0
> > >>>> [ 2732.434127] scsi host1: ib_srp: reconnect succeeded
> > >>>> [ 2733.048023] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817ed0a9c30
> > >>>>
> > >>>> [root@localhost ~]# [ 2746.413277] mlx5_0:dump_cqe:262:(pid 15877):
> > >>>> dump
> > >>>> error cqe
> > >>>> [ 2746.443240] 00000000 00000000 00000000 00000000
> > >>>> [ 2746.469323] 00000000 00000000 00000000 00000000
> > >>>> [ 2746.495310] 00000000 00000000 00000000 00000000
> > >>>> [ 2746.521407] 00000000 0f007806 25000032 003c7ad0
> > >>>> [ 2752.445899] scsi host1: ib_srp: reconnect succeeded
> > >>>> [ 2752.481835] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817ed0a9cf0
> > >>>> [ 2763.267386] mlx5_0:dump_cqe:262:(pid 15877): dump error cqe
> > >>>> [ 2763.297826] 00000000 00000000 00000000 00000000
> > >>>> [ 2763.323352] 00000000 00000000 00000000 00000000
> > >>>> [ 2763.348722] 00000000 00000000 00000000 00000000
> > >>>> [ 2763.374681] 00000000 0f007806 2500003a 00084bd0
> > >>>>
> > >>>> [root@localhost ~]# [ 2769.385203] fast_io_fail_tmo expired for SRP
> > >>>> port-1:1 / host1.
> > >>>> [ 2769.415956] scsi host1: ib_srp: reconnect succeeded
> > >>>> [ 2769.450258] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817ed0a9cf0
> > >>>> [ 2780.064627] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
> > >>>> [ 2780.093520] 00000000 00000000 00000000 00000000
> > >>>> [ 2780.120067] 00000000 00000000 00000000 00000000
> > >>>> [ 2780.145575] 00000000 00000000 00000000 00000000
> > >>>> [ 2780.171153] 00000000 0f007806 25000042 000833d0
> > >>>> [ 2785.923399] scsi host1: ib_srp: reconnect succeeded
> > >>>> [ 2785.957504] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817ed0a9cf0
> > >>>> [ 2796.463426] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
> > >>>> [ 2796.495257] 00000000 00000000 00000000 00000000
> > >>>> [ 2796.521506] 00000000 00000000 00000000 00000000
> > >>>> [ 2796.547640] 00000000 00000000 00000000 00000000
> > >>>> [ 2796.573120] 00000000 0f007806 2500004a 00083bd0
> > >>>> [ 2802.562578] scsi host1: ib_srp: reconnect succeeded
> > >>>> [ 2802.596880] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > >>>> for
> > >>>> CQE ffff8817ed0a9cf0
> > >>>>
> > >>>> Regards
> > >>>> Laurence
> > >>>>
> > >>>
> > >> Doing this now
> > >> Thanks
> > >> Laurence
> > >
> > > Max
> > >
> > > The Patch is not correct.
> > >
> > > drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_alloc_priv_descs':
> > > drivers/infiniband/hw/mlx5/mr.c:1406:30: error: 'struct ib_device' has no
> > > member named 'attr'
> > > WARN_ON_ONCE(ndescs > device->attr.max_fast_reg_page_list_len);
> > > ^
> > > ./include/asm-generic/bug.h:117:27: note: in definition of macro
> > > 'WARN_ON_ONCE'
> > > int __ret_warn_once = !!(condition); \
> > >
> > > I think you meant to give me
> > >
> > > WARN_ON_ONCE(ndescs > ib_device_attr->attr.max_fast_reg_page_list_len);
> > >
> > > Can you confirm
> >
> > Hi Laurence,
> > should be device->attrs.max_fast_reg_page_list_len.
> >
> > please check this one that might solve the issue (on top of everything):
> >
> >
> > diff --git a/drivers/infiniband/hw/mlx5/mr.c
> > b/drivers/infiniband/hw/mlx5/mr.c
> > index b8f9382..063d116 100644
> > --- a/drivers/infiniband/hw/mlx5/mr.c
> > +++ b/drivers/infiniband/hw/mlx5/mr.c
> > @@ -1559,7 +1559,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
> > mr->max_descs = ndescs;
> > } else if (mr_type == IB_MR_TYPE_SG_GAPS) {
> > mr->access_mode = MLX5_MKC_ACCESS_MODE_KLMS;
> > -
> > + MLX5_SET(mkc, mkc, translations_octword_size,
> > ALIGN(max_num_sg + 1, 4));
> > err = mlx5_alloc_priv_descs(pd->device, mr,
> > ndescs, sizeof(struct
> > mlx5_klm));
> > if (err)
> >
> > thanks,
> > Max.
> >
> > >
> > > Thanks
> > > Laurence
> > >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> Hello Max
>
> I have the corrected WARN_ON_ONCE patch and the above patch as well as the
> rest as it was from Barts tree.
>
> Still fails.
>
> For a baseline I can revert
> a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS
>
> Then test again to make sure we are starting from a good place.
>
> Initiator log
>
> [ 280.481951] scsi host1: ib_srp: failed FAST REG status memory management
> operation error (6) for CQE ffff8817d9a881b8
> [ 301.149106] scsi host1: ib_srp: reconnect succeeded
> [ 301.280635] scsi host1: ib_srp: failed RECV status WR flushed (5) for CQE
> ffff8817ed32f2f0
> [ 334.596420] scsi host2: ib_srp: failed RECV status WR flushed (5) for CQE
> ffff8817c592c970
> [ 334.599689] mlx5_1:dump_cqe:262:(pid 20): dump error cqe
> [ 334.599691] 00000000 00000000 00000000 00000000
> [ 334.599692] 00000000 00000000 00000000 00000000
> [ 334.599692] 00000000 00000000 00000000 00000000
> [ 334.599693] 00000000 0f007806 2500002d 067b48d0
> [ 334.599697] scsi host2: ib_srp: failed FAST REG status memory management
> operation error (6) for CQE ffff8817c6e30078
> [ 336.117248] mlx5_0:dump_cqe:262:(pid 130): dump error cqe
> [ 336.145840] 00000000 00000000 00000000 00000000
> [ 336.171830] 00000000 00000000 00000000 00000000
> [ 336.197688] 00000000 00000000 00000000 00000000
> [ 336.223720] 00000000 0f007806 25000032 005408d0
> [ 339.712706] fast_io_fail_tmo expired for SRP port-1:1 / host1.
> [ 341.453634] scsi host1: ib_srp: reconnect succeeded
> [ 341.481600] mlx5_0:dump_cqe:262:(pid 130): dump error cqe
> [ 341.482145] scsi host1: ib_srp: failed RECV status WR flushed (5) for CQE
> ffff8817ecaf6970
> [ 341.559359] 00000000 00000000 00000000 00000000
> [ 341.585397] 00000000 00000000 00000000 00000000
> [ 341.610948] 00000000 00000000 00000000 00000000
> [ 341.637515] 00000000 0f007806 2500003d 000046d0
> [ 342.297598] sd 1:0:0:9: rejecting I/O to offline device
> [ 342.297936] sd 1:0:0:9: [sdg] tag#28 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.297941] sd 1:0:0:9: [sdg] tag#28 CDB: Write(10) 2a 00 00 00 40 00 00
> 40 00 00
> [ 342.297943] blk_update_request: recoverable transport error, dev sdg,
> sector 16384
> [ 342.297951] sd 1:0:0:20: [sdar] tag#5 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.297952] sd 1:0:0:20: [sdar] tag#15 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.297956] sd 1:0:0:20: [sdar] tag#5 CDB: Write(10) 2a 00 00 03 c0 00 00
> 40 00 00
> [ 342.297956] sd 1:0:0:20: [sdar] tag#15 CDB: Write(10) 2a 00 00 2c c0 00 00
> 40 00 00
> [ 342.297958] blk_update_request: recoverable transport error, dev sdar,
> sector 245760
> [ 342.297959] blk_update_request: recoverable transport error, dev sdar,
> sector 2932736
> [ 342.298119] device-mapper: multipath: Failing path 8:96.
> [ 342.298266] sd 1:0:0:9: [sdg] tag#29 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298268] sd 1:0:0:9: [sdg] tag#29 CDB: Write(10) 2a 00 00 00 c0 00 00
> 40 00 00
> [ 342.298269] blk_update_request: recoverable transport error, dev sdg,
> sector 49152
> [ 342.298300] device-mapper: multipath: Failing path 66:176.
> [ 342.298486] sd 1:0:0:20: [sdar] tag#16 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298488] sd 1:0:0:20: [sdar] tag#6 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298489] sd 1:0:0:20: [sdar] tag#16 CDB: Write(10) 2a 00 00 2d 40 00 00
> 40 00 00
> [ 342.298490] sd 1:0:0:20: [sdar] tag#6 CDB: Write(10) 2a 00 00 04 40 00 00
> 40 00 00
> [ 342.298491] blk_update_request: recoverable transport error, dev sdar,
> sector 2965504
> [ 342.298492] blk_update_request: recoverable transport error, dev sdar,
> sector 278528
> [ 342.298582] sd 1:0:0:9: [sdg] tag#30 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298584] sd 1:0:0:9: [sdg] tag#30 CDB: Write(10) 2a 00 00 01 40 00 00
> 40 00 00
> [ 342.298585] blk_update_request: recoverable transport error, dev sdg,
> sector 81920
> [ 342.298889] sd 1:0:0:9: [sdg] tag#31 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298890] sd 1:0:0:9: [sdg] tag#31 CDB: Write(10) 2a 00 00 01 c0 00 00
> 40 00 00
> [ 342.298891] blk_update_request: recoverable transport error, dev sdg,
> sector 114688
> [ 342.298981] sd 1:0:0:20: [sdar] tag#7 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.298983] sd 1:0:0:20: [sdar] tag#7 CDB: Write(10) 2a 00 00 04 c0 00 00
> 40 00 00
> [ 342.298985] blk_update_request: recoverable transport error, dev sdar,
> sector 311296
> [ 342.299004] sd 1:0:0:20: [sdar] tag#17 FAILED Result:
> hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK
> [ 342.299007] sd 1:0:0:20: [sdar] tag#17 CDB: Write(10) 2a 00 00 34 c0 00 00
> 40 00 00
> [ 342.299009] blk_update_request: recoverable transport error, dev sdar,
> sector 3457024
> [ 342.356353] device-mapper: multipath: Failing path 8:64.
> [ 342.356489] device-mapper: multipath: Failing path 8:128.
> [ 342.356628] device-mapper: multipath: Failing path 8:160.
> [ 342.356699] device-mapper: multipath: Failing path 8:176.
> [ 342.356767] device-mapper: multipath: Failing path 8:240.
> [ 342.356834] device-mapper: multipath: Failing path 8:208.
> [ 342.356900] device-mapper: multipath: Failing path 65:16.
> [ 342.356967] device-mapper: multipath: Failing path 65:64.
> [ 342.357035] device-mapper: multipath: Failing path 65:96.
> [ 342.357103] device-mapper: multipath: Failing path 65:128.
> [ 342.357169] device-mapper: multipath: Failing path 65:176.
> [ 342.357237] device-mapper: multipath: Failing path 65:208.
> [ 342.357303] device-mapper: multipath: Failing path 65:224.
> [ 342.357371] device-mapper: multipath: Failing path 66:0.
> [ 342.357454] device-mapper: multipath: Failing path 66:32.
> [ 342.357521] device-mapper: multipath: Failing path 66:48.
> [ 342.357647] device-mapper: multipath: Failing path 66:80.
> [ 342.357714] device-mapper: multipath: Failing path 66:112.
> [ 342.357781] device-mapper: multipath: Failing path 66:144.
> [ 342.357936] device-mapper: multipath: Failing path 66:208.
> [ 342.358019] device-mapper: multipath: Failing path 66:240.
> [ 342.358115] device-mapper: multipath: Failing path 67:16.
> [ 342.358183] device-mapper: multipath: Failing path 67:48.
> [ 342.358264] device-mapper: multipath: Failing path 67:80.
> [ 342.358359] device-mapper: multipath: Failing path 67:128.
> [ 342.358442] device-mapper: multipath: Failing path 67:160.
> [ 342.358594] device-mapper: multipath: Failing path 67:224.
> [ 342.358671] device-mapper: multipath: Failing path 67:208.
> [ 350.157728] scsi host2: ib_srp: reconnect succeeded
> [ 350.189605] mlx5_1:dump_cqe:262:(pid 4756): dump error cqe
> [ 350.193180] mlx5_1:dump_cqe:262:(pid 1275): dump error cqe
> [ 350.193182] 00000000 00000000 00000000 00000000
> [ 350.193182] 00000000 00000000 00000000 00000000
> [ 350.193183] 00000000 00000000 00000000 00000000
> [ 350.193183] 00000000 0f007806 25000035 04f569d0
> [ 350.193187] scsi host2: ib_srp: failed FAST REG status memory management
> operation error (6) for CQE ffff8817c6e30078
> [ 350.412637] 00000000 00000000 00000000 00000000
> [ 350.436431] 00000000 00000000 00000000 00000000
> [ 350.461871] 00000000 00000000 00000000 00000000
> [ 350.487549] 00000000 0f007806 25000032 000843d0
>
> Target Log
>
> Thee events happened after the first failures on the initiator
>
> [ 1111.029847] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-49.
> [ 1111.078815] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-48.
> [ 1111.127420] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-47.
> [ 1111.175801] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-46.
> [ 1111.223725] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-45.
> [ 1111.271957] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-44.
> [ 1111.319494] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-43.
> [ 1111.365795] ib_srpt Received CM TimeWait exit for ch
> 0x4f6e72000390fe7c7cfe900300726ed3-42.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Max
These are the parameters all my tests run with.
Same as always.
[root@localhost modprobe.d]# cat ib_srp.conf
options ib_srp cmd_sg_entries=255 indirect_sg_entries=2048
I dont set prefer_fr so it defaults to Y
[root@localhost parameters]# cat prefer_fr
Y
I have no settings for mlx5_core, all defaults.
Thanks
Laurence
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
