Thanks Mark. This will be fixed in next version. Ram -----Original Message----- From: Mark Bloch [mailto:markb@xxxxxxxxxxxx] Sent: Monday, September 12, 2016 9:58 PM To: Ram Amrani <Ram.Amrani@xxxxxxxxxx>; dledford@xxxxxxxxxx; David Miller <davem@xxxxxxxxxxxxx> Cc: Yuval Mintz <Yuval.Mintz@xxxxxxxxxx>; Ariel Elior <Ariel.Elior@xxxxxxxxxx>; Michal Kalderon <Michal.Kalderon@xxxxxxxxxx>; Rajesh Borundia <rajesh.borundia@xxxxxxxxxx>; linux-rdma@xxxxxxxxxxxxxxx; netdev <netdev@xxxxxxxxxxxxxxx> Subject: Re: [RFC 03/11] Add support for RoCE HW init On 12/09/2016 19:07, Ram Amrani wrote: > Allocate and setup RoCE resources, interrupts and completion queues. > Adds device attributes. > > Signed-off-by: Rajesh Borundia <rajesh.borundia@xxxxxxxxxx> > Signed-off-by: Ram Amrani <Ram.Amrani@xxxxxxxxxx> > --- > drivers/infiniband/hw/qedr/main.c | 408 +++++++++++- > drivers/infiniband/hw/qedr/qedr.h | 118 ++++ > drivers/infiniband/hw/qedr/qedr_hsi.h | 56 ++ > drivers/infiniband/hw/qedr/qedr_hsi_rdma.h | 96 +++ > drivers/net/ethernet/qlogic/qed/Makefile | 1 + > drivers/net/ethernet/qlogic/qed/qed.h | 26 +- > drivers/net/ethernet/qlogic/qed/qed_cxt.c | 6 + > drivers/net/ethernet/qlogic/qed/qed_cxt.h | 6 + > drivers/net/ethernet/qlogic/qed/qed_dev.c | 155 +++++ > drivers/net/ethernet/qlogic/qed/qed_main.c | 44 +- > drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 7 + > drivers/net/ethernet/qlogic/qed/qed_roce.c | 887 +++++++++++++++++++++++++ > drivers/net/ethernet/qlogic/qed/qed_roce.h | 117 ++++ > drivers/net/ethernet/qlogic/qed/qed_sp.h | 1 + > drivers/net/ethernet/qlogic/qed/qed_spq.c | 8 + > drivers/net/ethernet/qlogic/qede/qede_roce.c | 2 +- > include/linux/qed/qed_if.h | 5 +- > include/linux/qed/qed_roce_if.h | 345 ++++++++++ > 18 files changed, 2281 insertions(+), 7 deletions(-) create mode > 100644 drivers/infiniband/hw/qedr/qedr_hsi.h > create mode 100644 drivers/infiniband/hw/qedr/qedr_hsi_rdma.h > create mode 100644 drivers/net/ethernet/qlogic/qed/qed_roce.c > create mode 100644 drivers/net/ethernet/qlogic/qed/qed_roce.h > create mode 100644 include/linux/qed/qed_roce_if.h > > diff --git a/drivers/infiniband/hw/qedr/main.c > b/drivers/infiniband/hw/qedr/main.c > index 3fe58a3..0b5274a 100644 > --- a/drivers/infiniband/hw/qedr/main.c > +++ b/drivers/infiniband/hw/qedr/main.c > @@ -36,6 +36,8 @@ > #include <linux/iommu.h> > #include <net/addrconf.h> > #include <linux/qed/qede_roce.h> > +#include <linux/qed/qed_chain.h> > +#include <linux/qed/qed_if.h> > #include "qedr.h" > > MODULE_DESCRIPTION("QLogic 40G/100G ROCE Driver"); @@ -80,6 +82,139 > @@ static int qedr_register_device(struct qedr_dev *dev) > return 0; > } > > +/* This function allocates fast-path status block memory */ static > +int qedr_alloc_mem_sb(struct qedr_dev *dev, > + struct qed_sb_info *sb_info, u16 sb_id) { > + struct status_block *sb_virt; > + dma_addr_t sb_phys; > + int rc; > + > + sb_virt = dma_alloc_coherent(&dev->pdev->dev, > + sizeof(*sb_virt), &sb_phys, GFP_KERNEL); > + if (!sb_virt) { > + pr_err("Status block allocation failed\n"); > + return -ENOMEM; > + } > + > + rc = dev->ops->common->sb_init(dev->cdev, sb_info, > + sb_virt, sb_phys, sb_id, > + QED_SB_TYPE_CNQ); > + if (rc) { > + pr_err("Status block initialization failed\n"); > + dma_free_coherent(&dev->pdev->dev, sizeof(*sb_virt), > + sb_virt, sb_phys); > + return rc; > + } > + > + return 0; > +} > + > +static void qedr_free_mem_sb(struct qedr_dev *dev, > + struct qed_sb_info *sb_info, int sb_id) { > + if (sb_info->sb_virt) { > + dev->ops->common->sb_release(dev->cdev, sb_info, sb_id); > + dma_free_coherent(&dev->pdev->dev, sizeof(*sb_info->sb_virt), > + (void *)sb_info->sb_virt, sb_info->sb_phys); > + } > +} > + > +static void qedr_free_resources(struct qedr_dev *dev) { > + int i; > + > + for (i = 0; i < dev->num_cnq; i++) { > + qedr_free_mem_sb(dev, &dev->sb_array[i], dev->sb_start + i); > + dev->ops->common->chain_free(dev->cdev, &dev->cnq_array[i].pbl); > + } > + > + kfree(dev->cnq_array); > + kfree(dev->sb_array); > + kfree(dev->sgid_tbl); > +} > + > +static int qedr_alloc_resources(struct qedr_dev *dev) { > + struct qedr_cnq *cnq; > + __le16 *cons_pi; > + u16 n_entries; > + int i, rc; > + > + dev->sgid_tbl = kzalloc(sizeof(union ib_gid) * > + QEDR_MAX_SGID, GFP_KERNEL); > + if (!dev->sgid_tbl) > + return -ENOMEM; > + > + spin_lock_init(&dev->sgid_lock); > + > + /* Allocate Status blocks for CNQ */ > + dev->sb_array = kcalloc(dev->num_cnq, sizeof(*dev->sb_array), > + GFP_KERNEL); > + if (!dev->sb_array) { > + rc = -ENOMEM; > + goto err1; > + } > + > + dev->cnq_array = kcalloc(dev->num_cnq, > + sizeof(*dev->cnq_array), GFP_KERNEL); > + if (!dev->cnq_array) { > + rc = -ENOMEM; > + goto err2; > + } > + > + dev->sb_start = dev->ops->rdma_get_start_sb(dev->cdev); > + > + /* Allocate CNQ PBLs */ > + n_entries = min_t(u32, QED_RDMA_MAX_CNQ_SIZE, QEDR_ROCE_MAX_CNQ_SIZE); > + for (i = 0; i < dev->num_cnq; i++) { > + cnq = &dev->cnq_array[i]; > + > + rc = qedr_alloc_mem_sb(dev, &dev->sb_array[i], > + dev->sb_start + i); > + if (rc) > + goto err3; > + > + rc = dev->ops->common->chain_alloc(dev->cdev, > + QED_CHAIN_USE_TO_CONSUME, > + QED_CHAIN_MODE_PBL, > + QED_CHAIN_CNT_TYPE_U16, > + n_entries, > + sizeof(struct regpair *), > + &cnq->pbl); > + if (rc) > + goto err4; > + > + cnq->dev = dev; > + cnq->sb = &dev->sb_array[i]; > + cons_pi = dev->sb_array[i].sb_virt->pi_array; > + cnq->hw_cons_ptr = &cons_pi[QED_ROCE_PROTOCOL_INDEX]; > + cnq->index = i; > + sprintf(cnq->name, "qedr%d@pci:%s", > + i, pci_name(dev->pdev)); > + > + DP_VERBOSE(dev, QEDR_MSG_INIT, "cnq[%d].cons=%d\n", > + i, qed_chain_get_cons_idx(&cnq->pbl)); > + } > + > + return 0; > +err4: > + qedr_free_mem_sb(dev, &dev->sb_array[i], dev->sb_start + i); > + for (--i; i >= 0; i--) { > + dev->ops->common->chain_free(dev->cdev, &dev->cnq_array[i].pbl); > + qedr_free_mem_sb(dev, &dev->sb_array[i], dev->sb_start + i); > + } > +err3: > + for (--i; i >= 0; i--) > + qedr_free_mem_sb(dev, &dev->sb_array[i], dev->sb_start + i); > + kfree(dev->cnq_array); This doesn't seem right, going from err4 to err3 i = 0, the for loop in err3 won't do anything. > +err2: > + kfree(dev->sb_array); > +err1: > + kfree(dev->sgid_tbl); > + return rc; > +} > + Mark -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
