From: Moshe Shemesh <moshe@xxxxxxxxxx> Add new field reset_state to MFRL register. This field expose current state of sync reset for fw update. This field enables sharing with the user more details on why fw activate failed in case it failed the sync reset stage. Signed-off-by: Moshe Shemesh <moshe@xxxxxxxxxx> Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxx> --- include/linux/mlx5/mlx5_ifc.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 598ac3bcc901..8ca2d65ff789 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -9694,7 +9694,8 @@ struct mlx5_ifc_pcam_reg_bits { }; struct mlx5_ifc_mcam_enhanced_features_bits { - u8 reserved_at_0[0x6b]; + u8 reserved_at_0[0x6a]; + u8 reset_state[0x1]; u8 ptpcyc2realtime_modify[0x1]; u8 reserved_at_6c[0x2]; u8 pci_status_and_power[0x1]; @@ -10375,6 +10376,14 @@ struct mlx5_ifc_mcda_reg_bits { u8 data[][0x20]; }; +enum { + MLX5_MFRL_REG_RESET_STATE_IDLE = 0, + MLX5_MFRL_REG_RESET_STATE_IN_NEGOTIATION = 1, + MLX5_MFRL_REG_RESET_STATE_RESET_IN_PROGRESS = 2, + MLX5_MFRL_REG_RESET_STATE_TIMEOUT = 3, + MLX5_MFRL_REG_RESET_STATE_NACK = 4, +}; + enum { MLX5_MFRL_REG_RESET_TYPE_FULL_CHIP = BIT(0), MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE = BIT(1), @@ -10393,7 +10402,8 @@ struct mlx5_ifc_mfrl_reg_bits { u8 pci_sync_for_fw_update_start[0x1]; u8 pci_sync_for_fw_update_resp[0x2]; u8 rst_type_sel[0x3]; - u8 reserved_at_28[0x8]; + u8 reserved_at_28[0x4]; + u8 reset_state[0x4]; u8 reset_type[0x8]; u8 reset_level[0x8]; }; -- 2.35.1