[pull request][net-next/rdma-next 00/17] mlx5-next updates 2022-02-22

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Saeed Mahameed <saeedm@xxxxxxxxxx>

Hi Dave, Jakub and Jason,

The following PR includes updates to mlx5-next branch:

Headlines: 
==========

1) Jakub cleans up unused static inline function

2) I did some low level firmware command interface return status changes to
provide the caller with full visibility on the error/status returned by
the Firmware.

3) Use the new command interface in RDMA DEVX usecases to avoid flooding
dmesg with some "expected" user error prone use cases.

4) Moshe also uses the new command interface to grab the specific error
code from MFRL register command to provide the exact error reason for
why SW reset couldn't perform internally in FW.

5) From Mark Bloch: Lag, drop packets in hardware when possible

In active-backup mode the inactive interface's packets are dropped by the
bond device. In switchdev where TC rules are offloaded to the FDB
this can lead to packets being hit in the FDB where without offload
they would have been dropped before reaching TC rules in the kernel.

Create a drop rule to make sure packets on inactive ports are dropped
before reaching the FDB.

Listen on NETDEV_CHANGEUPPER / NETDEV_CHANGEINFODATA events and record
the inactive state and offload accordingly.

==========

Please pull and let me know if there's any problem.

The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07:

  Linux 5.17-rc1 (2022-01-23 10:12:53 +0200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git mlx5-next

for you to fetch changes up to 03dd4b816a528472acbf56dad06e0e284eed876b:

  net/mlx5: Add clarification on sync reset failure (2022-02-22 20:56:28 -0800)

----------------------------------------------------------------
Jakub Kicinski (1):
      mlx5: remove usused static inlines

Mark Bloch (7):
      net/mlx5: Add ability to insert to specific flow group
      net/mlx5: E-switch, remove special uplink ingress ACL handling
      net/mlx5: E-switch, add drop rule support to ingress ACL
      net/mlx5: Lag, use local variable already defined to access E-Switch
      net/mlx5: Lag, don't use magic numbers for ports
      net/mlx5: Lag, record inactive state of bond device
      net/mlx5: Lag, offload active-backup drops to hardware

Moshe Shemesh (2):
      net/mlx5: Add reset_state field to MFRL register
      net/mlx5: Add clarification on sync reset failure

Saeed Mahameed (6):
      net/mlx5: cmdif, Return value improvements
      net/mlx5: cmdif, cmd_check refactoring
      net/mlx5: cmdif, Add new api for command execution
      net/mlx5: Use mlx5_cmd_do() in core create_{cq,dct}
      net/mlx5: cmdif, Refactor error handling and reporting of async commands
      RDMA/mlx5: Use new command interface API

Sunil Rani (1):
      net/mlx5: E-Switch, reserve and use same uplink metadata across ports

 drivers/infiniband/hw/mlx5/devx.c                              |  61 +++++++++++++++++++++++-----------------
 drivers/infiniband/hw/mlx5/mr.c                                |  15 +++++++++-
 drivers/infiniband/hw/mlx5/qp.c                                |   1 +
 drivers/infiniband/hw/mlx5/qpc.c                               |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c                  | 328 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------
 drivers/net/ethernet/mellanox/mlx5/core/cq.c                   |  17 +++++++++--
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c              |  10 ++-----
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h    |   9 ------
 drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c |  87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ofld.h         |  15 ++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.h              |   3 ++
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c     |  93 +++++++++++++++++-------------------------------------------
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c              |   9 +++++-
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c             |  57 ++++++++++++++++++++++++++++++++-----
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h             |   3 +-
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c              | 142 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h              |   2 ++
 drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c               |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h          |   7 -----
 drivers/net/ethernet/mellanox/mlx5/core/main.c                 |   5 ++--
 drivers/net/ethernet/mellanox/mlx5/core/port.c                 |  20 ++++++++++---
 include/linux/mlx5/cq.h                                        |   2 ++
 include/linux/mlx5/driver.h                                    |  19 +++++--------
 include/linux/mlx5/fs.h                                        |   1 +
 include/linux/mlx5/mlx5_ifc.h                                  |  14 +++++++--
 25 files changed, 640 insertions(+), 284 deletions(-)


-- 
2.35.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux