> Subject: RE: [PATCH net-next 2/3] net/ice: Add support for enable_iwarp and
> enable_roce devlink param
>
>
>
> > From: Saleem, Shiraz <shiraz.saleem@xxxxxxxxx>
> > Sent: Tuesday, November 23, 2021 8:18 PM
> >
> > > Subject: RE: [PATCH net-next 2/3] net/ice: Add support for
> > > enable_iwarp and enable_roce devlink param
> > >
> > > Hi Tony,
> > >
> > > > From: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
> > > > Sent: Tuesday, November 23, 2021 2:41 AM
> > > >
> > > > From: Shiraz Saleem <shiraz.saleem@xxxxxxxxx>
> > > >
> > > > Allow support for 'enable_iwarp' and 'enable_roce' devlink params
> > > > to turn on/off iWARP or RoCE protocol support for E800 devices.
> > > >
> > > > For example, a user can turn on iWARP functionality with,
> > > >
> > > > devlink dev param set pci/0000:07:00.0 name enable_iwarp value
> > > > true cmode runtime
> > > >
> > > > This add an iWARP auxiliary rdma device, ice.iwarp.<>, under this PF.
> > > >
> > > > A user request to enable both iWARP and RoCE under the same PF is
> > > > rejected since this device does not support both protocols
> > > > simultaneously on the same port.
> > > >
> > > > Signed-off-by: Shiraz Saleem <shiraz.saleem@xxxxxxxxx>
> > > > Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@xxxxxxxxx>
> > > > Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
> > > > ---
> > > > drivers/net/ethernet/intel/ice/ice.h | 1 +
> > > > drivers/net/ethernet/intel/ice/ice_devlink.c | 144 +++++++++++++++++++
> > > > drivers/net/ethernet/intel/ice/ice_devlink.h | 6 +
> > > > drivers/net/ethernet/intel/ice/ice_idc.c | 4 +-
> > > > drivers/net/ethernet/intel/ice/ice_main.c | 9 +-
> > > > include/linux/net/intel/iidc.h | 7 +-
> > > > 6 files changed, 166 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/intel/ice/ice.h
> > > > b/drivers/net/ethernet/intel/ice/ice.h
> > > > index b2db39ee5f85..b67ad51cbcc9 100644
> > > > --- a/drivers/net/ethernet/intel/ice/ice.h
> > > > +++ b/drivers/net/ethernet/intel/ice/ice.h
> > > > @@ -576,6 +576,7 @@ struct ice_pf {
> > > > struct ice_hw_port_stats stats_prev;
> > > > struct ice_hw hw;
> > > > u8 stat_prev_loaded:1; /* has previous stats been loaded */
> > > > + u8 rdma_mode;
> > > This can be u8 rdma_mode: 1;
> > > See below.
> > >
> > > > u16 dcbx_cap;
> > > > u32 tx_timeout_count;
> > > > unsigned long tx_timeout_last_recovery; diff --git
> > > > a/drivers/net/ethernet/intel/ice/ice_devlink.c
> > > > b/drivers/net/ethernet/intel/ice/ice_devlink.c
> > > > index b9bd9f9472f6..478412b28a76 100644
> > > > --- a/drivers/net/ethernet/intel/ice/ice_devlink.c
> > > > +++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
> > > > @@ -430,6 +430,120 @@ static const struct devlink_ops
> > > > ice_devlink_ops =
> > {
> > > > .flash_update = ice_devlink_flash_update, };
> > > >
> > > > +static int
> > > > +ice_devlink_enable_roce_get(struct devlink *devlink, u32 id,
> > > > + struct devlink_param_gset_ctx *ctx) {
> > > > + struct ice_pf *pf = devlink_priv(devlink);
> > > > +
> > > > + ctx->val.vbool = pf->rdma_mode & IIDC_RDMA_PROTOCOL_ROCEV2;
> > > > +
> > > This is logical operation, and vbool will be still zero when rdma
> > > mode is rocev2, because it is not bit 0.
> > > Please see below. This error can be avoided by having rdma mode as
> > Boolean.
> >
> > Hi Parav -
> >
> > rdma_mode is used as a bit-mask.
> > 0 = disabled, i.e. enable_iwarp and enable_roce set to false by user.
> > 1 = IIDC_RDMA_PROTOCOL_IWARP
> > 2 = IIDC_RDMA_PROTOCOL_ROCEV2
> >
> Yes, I got it. bit mask is ok.
> But this line,
> ctx->val.vbool = pf->rdma_mode & IIDC_RDMA_PROTOCOL_ROCEV2;
> should be
> ctx->val.vbool = !!(pf->rdma_mode & IIDC_RDMA_PROTOCOL_ROCEV2);
> or
> ctx->val.vbool = pf->rdma_mode & IIDC_RDMA_PROTOCOL_ROCEV2 ? true :
> ctx->false;
>
> because & IIDC_RDMA_PROTOCOL_ROCEV2 is BIT(1) = 0x2.
>
Sure. I will send a fix.
