On Mon, Aug 02, 2021 at 04:47:28PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
>
> Multiple switchdev drivers depend on CONFIG_NET_SWITCHDEV in Kconfig,
> but have also gained a dependency on the bridge driver as they now
> call switchdev_bridge_port_offload():
>
> drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: In function `sparx5_netdevice_event':
> sparx5_switchdev.c:(.text+0x3cc): undefined reference to `switchdev_bridge_port_offload'
> drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_netdevice_event':
> cpsw_new.c:(.text+0x1098): undefined reference to `switchdev_bridge_port_offload'
>
> Some of these drivers already have a 'BRIDGE || !BRIDGE' dependency
> that avoids the link failure, but the 'rocker' driver was missing this
>
> For MLXSW/MLX5, SPARX5_SWITCH, and TI_K3_AM65_CPSW_NUSS, the
> driver can conditionally use switchdev support, which is then guarded
> by another Kconfig symbol. For these, add a dependency on a new Kconfig
> symbol NET_MAY_USE_SWITCHDEV that is defined to correctly model the
> dependency: if switchdev support is enabled, these drivers cannot be
> built-in when bridge support is in a module, but if either bridge or
> switchdev is disabled, or both are built-in, there is no such restriction.
>
> Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded")
> Fixes: b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> This version seems to pass my randconfig builds for the moment,
> but that doesn't mean it's correct either. Please have a closer
> look before this gets applied.
> ---
> drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 1 +
> drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 +
> drivers/net/ethernet/netronome/Kconfig | 1 +
> drivers/net/ethernet/ti/Kconfig | 1 +
> net/switchdev/Kconfig | 5 +++++
> 5 files changed, 9 insertions(+)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> index e1a5a79e27c7..3a752e57c1e5 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> @@ -12,6 +12,7 @@ config MLX5_CORE
> depends on MLXFW || !MLXFW
> depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
> depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
> + depends on NET_MAY_USE_SWITCHDEV
> help
> Core driver for low level functionality of the ConnectX-4 and
> Connect-IB cards by Mellanox Technologies.
MLX5_CORE does not appear to cover code that calls
switchdev_bridge_port_offload.
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> index 12871c8dc7c1..dee3925bdaea 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> @@ -5,6 +5,7 @@
>
> config MLXSW_CORE
> tristate "Mellanox Technologies Switch ASICs support"
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select MLXFW
> help
I think it is MLXSW_SPECTRUM rather than MLXSW_CORE
that controls compilation of spectrum_switchdev.c
which calls switchdev_bridge_port_offload.
But MLXSW_SPECTRUM seems to already depend on BRIDGE || BRIDGE=n
> diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
> index b82758d5beed..a298d19e8383 100644
> --- a/drivers/net/ethernet/netronome/Kconfig
> +++ b/drivers/net/ethernet/netronome/Kconfig
> @@ -21,6 +21,7 @@ config NFP
> depends on PCI && PCI_MSI
> depends on VXLAN || VXLAN=n
> depends on TLS && TLS_DEVICE || TLS_DEVICE=n
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select CRC32
> help
This seems wrong, the NFP driver doesn't call
switchdev_bridge_port_offload()
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 07192613256e..a73c6c236b25 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -93,6 +93,7 @@ config TI_CPTS
> config TI_K3_AM65_CPSW_NUSS
> tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
> depends on OF && TI_K3_UDMA_GLUE_LAYER
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select TI_DAVINCI_MDIO
> imply PHY_TI_GMII_SEL
I believe this has already been addressed by the following patch in net
b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
> diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig
> index 18a2d980e11d..3b0e627a4519 100644
> --- a/net/switchdev/Kconfig
> +++ b/net/switchdev/Kconfig
> @@ -12,3 +12,8 @@ config NET_SWITCHDEV
> meaning of the word "switch". This include devices supporting L2/L3 but
> also various flow offloading chips, including switches embedded into
> SR-IOV NICs.
> +
> +config NET_MAY_USE_SWITCHDEV
> + def_tristate y
> + depends on NET_SWITCHDEV || NET_SWITCHDEV=n
> + depends on BRIDGE || NET_SWITCHDEV=n
> --
> 2.29.2
>
