On Wed, Aug 7, 2013 at 7:54 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote: > Hi all, > > Changes since 20130806: > > The ext4 tree lost its build failure. > > The mvebu tree gained a build failure so I used the version from > next-20130806. > > The akpm tree gained conflicts against the ext4 tree. > > ---------------------------------------------------------------------------- > [ CC ext4 and pm folks ] I saw this on my 1st suspend which was not successful (2nd and 3rd try I could suspend and resume): [ 5467.724074] PM: Syncing filesystems ... done. [ 5467.973575] PM: Preparing system for mem sleep [ 5467.974121] Freezing user space processes ... [ 5487.970574] Freezing of tasks failed after 20.010 seconds (1 tasks refusing to freeze, wq_busy=0): [ 5487.970591] DOM Worker D ffffffff81811820 0 2437 1 0x00000004 [ 5487.970595] ffff880056ca3ca8 0000000000000002 00000000002d627f 000009af00000002 [ 5487.970598] ffff880066ede640 ffff880056ca3fd8 ffff880056ca3fd8 ffff880056ca3fd8 [ 5487.970601] ffff880119f98340 ffff880066ede640 ffff880056ca3ca8 ffff88011fad5118 [ 5487.970604] Call Trace: [ 5487.970612] [<ffffffff81144360>] ? __lock_page+0x70/0x70 [ 5487.970615] [<ffffffff816e8179>] schedule+0x29/0x70 [ 5487.970618] [<ffffffff816e824f>] io_schedule+0x8f/0xd0 [ 5487.970621] [<ffffffff8114436e>] sleep_on_page+0xe/0x20 [ 5487.970624] [<ffffffff816e4be2>] __wait_on_bit+0x62/0x90 [ 5487.970627] [<ffffffff81144f9b>] ? find_get_pages_tag+0xcb/0x170 [ 5487.970630] [<ffffffff811444d0>] wait_on_page_bit+0x80/0x90 [ 5487.970633] [<ffffffff8108a0e0>] ? wake_atomic_t_function+0x40/0x40 [ 5487.970636] [<ffffffff811445ec>] filemap_fdatawait_range+0x10c/0x190 [ 5487.970640] [<ffffffff81145ce0>] filemap_write_and_wait_range+0x50/0x80 [ 5487.970644] [<ffffffff81246c3d>] ext4_sync_file+0x15d/0x340 [ 5487.970648] [<ffffffff811db8dd>] do_fsync+0x5d/0x90 [ 5487.970651] [<ffffffff811dbcc0>] SyS_fsync+0x10/0x20 [ 5487.970655] [<ffffffff816f25ef>] tracesys+0xe1/0xe6 [ 5487.970658] [ 5487.970659] Restarting tasks ... done. With yesterday's -next I did not have issues like this. Any idea? dmesg and kernel-config attached. - Sedat -
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc4-next20130807-1-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Aug 7 10:24:53 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87424 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s87424 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7129K kernel code, 1045K rwdata, 3140K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.436 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.87 BogoMIPS (lpj=6385744) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000303] AppArmor: AppArmor initialized [ 0.000340] Yama: becoming mindful. [ 0.000750] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002352] Mount-cache hash table entries: 256 [ 0.002913] Initializing cgroup subsys memory [ 0.003007] Initializing cgroup subsys devices [ 0.003045] Initializing cgroup subsys freezer [ 0.003084] Initializing cgroup subsys blkio [ 0.003120] Initializing cgroup subsys perf_event [ 0.003160] Initializing cgroup subsys hugetlb [ 0.003250] Disabled fast string operations [ 0.003287] CPU: Physical Processor ID: 0 [ 0.003323] CPU: Processor Core ID: 0 [ 0.003362] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003362] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003428] mce: CPU supports 7 MCE banks [ 0.003479] CPU0: Thermal monitoring enabled (TM1) [ 0.003525] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003525] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003525] tlb_flushall_shift: 5 [ 0.003698] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004779] ACPI: Core revision 20130626 [ 0.015596] ACPI: All ACPI Tables successfully acquired [ 0.029688] ftrace: allocating 27103 entries in 106 pages [ 0.044468] Enabling x2apic [ 0.044506] Enabled x2apic [ 0.044570] Switched APIC routing to physical x2apic. [ 0.045532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085229] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085344] TSC deadline timer enabled [ 0.085356] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085505] ... version: 3 [ 0.085541] ... bit width: 48 [ 0.085577] ... generic registers: 4 [ 0.085613] ... value mask: 0000ffffffffffff [ 0.085651] ... max period: 0000ffffffffffff [ 0.085689] ... fixed-purpose events: 3 [ 0.085725] ... event mask: 000000070000000f [ 0.098730] Disabled fast string operations [ 0.101910] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113501] Disabled fast string operations [ 0.127119] Disabled fast string operations [ 0.087753] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129243] Brought up 4 CPUs [ 0.129349] smpboot: Total of 4 processors activated (12771.48 BogoMIPS) [ 0.133397] devtmpfs: initialized [ 0.135424] EVM: security.selinux [ 0.135459] EVM: security.SMACK64 [ 0.135494] EVM: security.capability [ 0.135617] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.137163] regulator-dummy: no parameters [ 0.137355] NET: Registered protocol family 16 [ 0.137693] cpuidle: using governor ladder [ 0.137730] cpuidle: using governor menu [ 0.137804] ACPI: bus type PCI registered [ 0.137950] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138010] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.144991] PCI: Using configuration type 1 for base access [ 0.148357] bio: create slab <bio-0> at 0 [ 0.148814] ACPI: Added _OSI(Module Device) [ 0.148852] ACPI: Added _OSI(Processor Device) [ 0.148889] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148926] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150805] ACPI: EC: Look up EC in DSDT [ 0.177040] ACPI: Executed 1 blocks of module-level executable AML code [ 0.183057] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.194959] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195568] ACPI: Dynamic OEM Table Load: [ 0.195639] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205484] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.206167] ACPI: Dynamic OEM Table Load: [ 0.206238] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217579] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218159] ACPI: Dynamic OEM Table Load: [ 0.218228] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231393] ACPI: Interpreter enabled [ 0.231444] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130626/hwxface-571) [ 0.231552] ACPI: (supports S0 S1 S3 S4 S5) [ 0.231589] ACPI: Using IOAPIC for interrupt routing [ 0.231681] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231968] ACPI: No dock devices found. [ 0.255725] ACPI: Power Resource [FN00] (off) [ 0.255945] ACPI: Power Resource [FN01] (off) [ 0.256160] ACPI: Power Resource [FN02] (off) [ 0.256374] ACPI: Power Resource [FN03] (off) [ 0.256592] ACPI: Power Resource [FN04] (off) [ 0.257787] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.258161] \_SB_.PCI0:_OSC invalid UUID [ 0.258162] _OSC request data:1 8 0 [ 0.259070] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.259182] PCI host bridge to bus 0000:00 [ 0.259221] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259261] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259302] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259343] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259385] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259427] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259483] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.259636] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.259649] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.259657] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259662] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.259848] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.259875] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.259961] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260116] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260142] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260243] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260349] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260369] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260449] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260495] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260601] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.260692] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260740] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.260847] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.260936] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261000] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261105] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261193] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261317] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261341] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261448] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261552] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.261748] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.261771] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.261782] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.261792] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.261802] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.261812] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.261822] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.261875] pci 0000:00:1f.2: PME# supported from D3hot [ 0.261990] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262010] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.262035] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262384] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262580] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263308] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263479] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269556] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269600] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.269767] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.269837] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.269960] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.270036] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270364] pci 0000:02:00.0: supports D1 D2 [ 0.270366] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270493] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277476] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277536] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277546] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277673] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277711] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.277910] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285447] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285523] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285706] \_SB_.PCI0:_OSC invalid UUID [ 0.285707] _OSC request data:1 1f 0 [ 0.285712] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.285768] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286678] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.287027] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287421] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287766] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.288112] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288485] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.288878] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289225] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.290114] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.290192] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290257] Found 1 acpi root devices [ 0.290327] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290613] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290671] vgaarb: loaded [ 0.290705] vgaarb: bridge control possible 0000:00:02.0 [ 0.291415] SCSI subsystem initialized [ 0.291453] ACPI: bus type ATA registered [ 0.291603] libata version 3.00 loaded. [ 0.291665] ACPI: bus type USB registered [ 0.291745] usbcore: registered new interface driver usbfs [ 0.291807] usbcore: registered new interface driver hub [ 0.291900] usbcore: registered new device driver usb [ 0.292293] PCI: Using ACPI for IRQ routing [ 0.294003] PCI: pci_cache_line_size set to 64 bytes [ 0.294114] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.294117] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.294119] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.294121] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294366] NetLabel: Initializing [ 0.294401] NetLabel: domain hash size = 128 [ 0.294438] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294522] NetLabel: unlabeled traffic allowed by default [ 0.294649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.294840] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.296902] Switched to clocksource hpet [ 0.314600] AppArmor: AppArmor Filesystem Enabled [ 0.314689] pnp: PnP ACPI init [ 0.314739] ACPI: bus type PNP registered [ 0.315132] pnp 00:00: [dma 4] [ 0.315173] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.315217] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.315382] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315438] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.315516] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.315559] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.315600] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.315640] system 00:04: [io 0xffff] has been reserved [ 0.315680] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.315721] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.315762] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.315802] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.315843] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.315883] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.315926] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315973] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.316066] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.316108] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.316168] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.316249] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.316558] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.316601] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.316642] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.316684] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.316726] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.316768] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.316808] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.316850] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.316904] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.316947] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.316990] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317715] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.317755] pnp: PnP ACPI: found 11 devices [ 0.317792] ACPI: bus type PNP unregistered [ 0.325874] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.325919] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.325969] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.326010] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.326057] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326119] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.326161] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.326636] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.326638] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.326640] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326642] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.326644] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.326646] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.326649] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.326651] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326653] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.326788] NET: Registered protocol family 2 [ 0.327194] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.327432] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.327758] TCP: Hash tables configured (established 32768 bind 32768) [ 0.328057] TCP: reno registered [ 0.328111] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328214] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328507] NET: Registered protocol family 1 [ 0.328562] pci 0000:00:02.0: Boot video device [ 0.329346] PCI: CLS 64 bytes, default 64 [ 0.329557] Trying to unpack rootfs image as initramfs... [ 0.405755] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.405815] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.405857] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.406270] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406318] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406365] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406413] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406554] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.407111] Scanning for low memory corruption every 60 seconds [ 0.407760] Initialise module verification [ 0.407860] audit: initializing netlink socket (disabled) [ 0.407916] type=2000 audit(1375874369.396:1): initialized [ 0.438181] bounce pool size: 64 pages [ 0.438244] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438952] VFS: Disk quotas dquot_6.5.2 [ 0.439030] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439894] fuse init (API version 7.22) [ 0.440035] msgmni has been set to 7698 [ 0.440742] Key type asymmetric registered [ 0.440782] Asymmetric key parser 'x509' registered [ 0.440889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.441001] io scheduler noop registered [ 0.441039] io scheduler deadline registered (default) [ 0.441112] io scheduler cfq registered [ 0.441526] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.441606] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.441790] intel_idle: MWAIT substates: 0x21120 [ 0.441792] intel_idle: v0.4 model 0x2A [ 0.441793] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.442527] ACPI: AC Adapter [ADP1] (on-line) [ 0.442851] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.443123] ACPI: Lid Switch [LID0] [ 0.443233] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.443292] ACPI: Power Button [PWRB] [ 0.443394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.443450] ACPI: Power Button [PWRF] [ 0.443584] ACPI: Fan [FAN0] (off) [ 0.443670] ACPI: Fan [FAN1] (off) [ 0.443758] ACPI: Fan [FAN2] (off) [ 0.443840] ACPI: Fan [FAN3] (off) [ 0.443928] ACPI: Fan [FAN4] (off) [ 0.444044] ACPI: Requesting acpi_cpufreq [ 0.447515] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.447557] ACPI: Thermal Zone [TZ00] (70 C) [ 0.448014] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.448054] ACPI: Thermal Zone [TZ01] (30 C) [ 0.448151] GHES: HEST is not enabled! [ 0.448409] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.452172] Linux agpgart interface v0.103 [ 0.455021] ACPI: Battery Slot [BAT1] (battery present) [ 0.455438] brd: module loaded [ 0.456704] loop: module loaded [ 0.456971] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.457012] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.460162] ahci 0000:00:1f.2: version 3.0 [ 0.460357] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.460566] ahci: SSS flag set, parallel bus scan disabled [ 0.472872] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.472946] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.473006] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.497809] scsi0 : ahci [ 0.498145] scsi1 : ahci [ 0.498394] scsi2 : ahci [ 0.498642] scsi3 : ahci [ 0.498898] scsi4 : ahci [ 0.499144] scsi5 : ahci [ 0.499272] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.499325] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.499377] ata3: DUMMY [ 0.499410] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.499463] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.499515] ata6: DUMMY [ 0.500427] libphy: Fixed MDIO Bus: probed [ 0.500741] tun: Universal TUN/TAP device driver, 1.6 [ 0.500792] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.500945] PPP generic driver version 2.4.2 [ 0.501104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.501146] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.501154] ehci-pci: EHCI PCI platform driver [ 0.501400] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.501410] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.501457] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.501530] ehci-pci 0000:00:1a.0: debug port 2 [ 0.501570] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.501574] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.501610] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.505492] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.505494] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.505540] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.505583] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.516773] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.516860] usb usb1: default language 0x0409 [ 0.516874] usb usb1: udev 1, busnum 1, minor = 0 [ 0.516877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.516918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.516972] usb usb1: Product: EHCI Host Controller [ 0.517010] usb usb1: Manufacturer: Linux 3.11.0-rc4-next20130807-1-iniza-small ehci_hcd [ 0.517065] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.517254] usb usb1: usb_probe_device [ 0.517258] usb usb1: configuration #1 chosen from 1 choice [ 0.517268] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.517300] hub 1-0:1.0: usb_probe_interface [ 0.517303] hub 1-0:1.0: usb_probe_interface - got id [ 0.517305] hub 1-0:1.0: USB hub found [ 0.517347] hub 1-0:1.0: 2 ports detected [ 0.517384] hub 1-0:1.0: standalone hub [ 0.517385] hub 1-0:1.0: no power switching (usb 1.0) [ 0.517387] hub 1-0:1.0: individual port over-current protection [ 0.517389] hub 1-0:1.0: power on to power good time: 20ms [ 0.517394] hub 1-0:1.0: local power source is good [ 0.517449] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.517717] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.517724] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.517769] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.517841] ehci-pci 0000:00:1d.0: debug port 2 [ 0.517881] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.517884] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.517921] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.521805] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.521807] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.521853] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.521896] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.532764] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.532847] usb usb2: default language 0x0409 [ 0.532860] usb usb2: udev 1, busnum 2, minor = 128 [ 0.532862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.532904] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.532958] usb usb2: Product: EHCI Host Controller [ 0.532996] usb usb2: Manufacturer: Linux 3.11.0-rc4-next20130807-1-iniza-small ehci_hcd [ 0.533051] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.533232] usb usb2: usb_probe_device [ 0.533235] usb usb2: configuration #1 chosen from 1 choice [ 0.533245] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.533278] hub 2-0:1.0: usb_probe_interface [ 0.533280] hub 2-0:1.0: usb_probe_interface - got id [ 0.533283] hub 2-0:1.0: USB hub found [ 0.533327] hub 2-0:1.0: 2 ports detected [ 0.533363] hub 2-0:1.0: standalone hub [ 0.533365] hub 2-0:1.0: no power switching (usb 1.0) [ 0.533367] hub 2-0:1.0: individual port over-current protection [ 0.533368] hub 2-0:1.0: power on to power good time: 20ms [ 0.533374] hub 2-0:1.0: local power source is good [ 0.533427] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.533505] ehci-platform: EHCI generic platform driver [ 0.533559] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.533600] ohci_hcd: block sizes: ed 80 td 96 [ 0.533606] ohci-pci: OHCI PCI platform driver [ 0.533663] ohci-platform: OHCI generic platform driver [ 0.533715] uhci_hcd: USB Universal Host Controller Interface driver [ 0.533960] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.534006] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.543777] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.543811] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.543819] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.543828] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.543834] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.543843] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.544119] usb usb3: default language 0x0409 [ 0.544131] usb usb3: udev 1, busnum 3, minor = 256 [ 0.544133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.544175] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.544229] usb usb3: Product: xHCI Host Controller [ 0.544267] usb usb3: Manufacturer: Linux 3.11.0-rc4-next20130807-1-iniza-small xhci_hcd [ 0.544323] usb usb3: SerialNumber: 0000:03:00.0 [ 0.544480] usb usb3: usb_probe_device [ 0.544482] usb usb3: configuration #1 chosen from 1 choice [ 0.544487] xHCI xhci_add_endpoint called for root hub [ 0.544489] xHCI xhci_check_bandwidth called for root hub [ 0.544496] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.544525] hub 3-0:1.0: usb_probe_interface [ 0.544527] hub 3-0:1.0: usb_probe_interface - got id [ 0.544530] hub 3-0:1.0: USB hub found [ 0.544576] hub 3-0:1.0: 2 ports detected [ 0.544613] hub 3-0:1.0: standalone hub [ 0.544614] hub 3-0:1.0: no power switching (usb 1.0) [ 0.544616] hub 3-0:1.0: individual port over-current protection [ 0.544618] hub 3-0:1.0: Single TT [ 0.544619] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.544621] hub 3-0:1.0: power on to power good time: 20ms [ 0.544626] hub 3-0:1.0: local power source is good [ 0.544664] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.544747] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.544793] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.544855] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.544894] usb usb4: skipped 1 descriptor after endpoint [ 0.544899] usb usb4: default language 0x0409 [ 0.544911] usb usb4: udev 1, busnum 4, minor = 384 [ 0.544913] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.544954] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.545008] usb usb4: Product: xHCI Host Controller [ 0.545046] usb usb4: Manufacturer: Linux 3.11.0-rc4-next20130807-1-iniza-small xhci_hcd [ 0.545101] usb usb4: SerialNumber: 0000:03:00.0 [ 0.545255] usb usb4: usb_probe_device [ 0.545257] usb usb4: configuration #1 chosen from 1 choice [ 0.545262] xHCI xhci_add_endpoint called for root hub [ 0.545263] xHCI xhci_check_bandwidth called for root hub [ 0.545269] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.545301] hub 4-0:1.0: usb_probe_interface [ 0.545302] hub 4-0:1.0: usb_probe_interface - got id [ 0.545305] hub 4-0:1.0: USB hub found [ 0.545350] hub 4-0:1.0: 2 ports detected [ 0.545386] hub 4-0:1.0: standalone hub [ 0.545388] hub 4-0:1.0: no power switching (usb 1.0) [ 0.545389] hub 4-0:1.0: individual port over-current protection [ 0.545391] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.545393] hub 4-0:1.0: power on to power good time: 20ms [ 0.545398] hub 4-0:1.0: local power source is good [ 0.545433] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.556834] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.563092] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.563135] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.563464] mousedev: PS/2 mouse device common for all mice [ 0.564086] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.564181] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.564313] device-mapper: uevent: version 1.0.3 [ 0.564482] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 0.564546] Intel P-state driver initializing. [ 0.564598] Intel pstate controlling: cpu 0 [ 0.564680] Intel pstate controlling: cpu 1 [ 0.564784] Intel pstate controlling: cpu 2 [ 0.564846] Intel pstate controlling: cpu 3 [ 0.564956] ledtrig-cpu: registered to indicate activity on CPUs [ 0.565633] ashmem: initialized [ 0.566082] TCP: cubic registered [ 0.566425] NET: Registered protocol family 10 [ 0.567014] NET: Registered protocol family 17 [ 0.567073] Key type dns_resolver registered [ 0.567665] PM: Hibernation image not present or could not be loaded. [ 0.567673] Loading module verification certificates [ 0.569064] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ebfa476eeb9c972b8c1993d0273055c9de8aff76' [ 0.569159] registered taskstats version 1 [ 0.574276] Key type trusted registered [ 0.574857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.583141] Key type encrypted registered [ 0.591563] rtc_cmos 00:05: setting system clock to 2013-08-07 11:19:30 UTC (1375874370) [ 0.592415] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.592484] EDD information not available. [ 0.616807] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.616824] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.632806] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.632824] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.640850] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.641162] hub 3-0:1.0: hub_suspend [ 0.641177] usb usb3: bus auto-suspend, wakeup 1 [ 0.644837] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.644892] hub 4-0:1.0: hub_suspend [ 0.644903] usb usb4: bus auto-suspend, wakeup 1 [ 0.653452] usb usb4: usb wakeup-resume [ 0.653464] usb usb4: usb auto-resume [ 0.664770] hub 4-0:1.0: hub_resume [ 0.664800] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.716725] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.716748] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.772926] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.772940] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.816671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.817936] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.818011] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.819457] ata1.00: configured for UDMA/133 [ 0.820043] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.820680] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.820778] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.820876] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.821398] sd 0:0:0:0: [sda] Write Protect is off [ 0.821476] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.821705] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.828625] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.830580] sda: sda1 sda2 sda3 [ 0.832467] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.884848] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.884865] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.961288] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.961299] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.961374] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.961799] usb 1-1: usb_probe_device [ 0.961809] usb 1-1: configuration #1 chosen from 1 choice [ 0.962033] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.962118] hub 1-1:1.0: usb_probe_interface [ 0.962124] hub 1-1:1.0: usb_probe_interface - got id [ 0.962131] hub 1-1:1.0: USB hub found [ 0.962384] hub 1-1:1.0: 6 ports detected [ 0.962457] hub 1-1:1.0: standalone hub [ 0.962461] hub 1-1:1.0: individual port power switching [ 0.962465] hub 1-1:1.0: individual port over-current protection [ 0.962469] hub 1-1:1.0: Single TT [ 0.962473] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.962477] hub 1-1:1.0: power on to power good time: 100ms [ 0.962755] hub 1-1:1.0: local power source is good [ 0.963213] hub 1-1:1.0: enabling power on all ports [ 0.964245] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.964267] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.016753] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.016770] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.060991] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.061696] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.072482] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.128674] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.128689] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.140448] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.141112] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.141191] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.141948] ata2.00: configured for UDMA/133 [ 1.142473] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.143076] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.143157] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.143476] sd 1:0:0:0: [sdb] Write Protect is off [ 1.143544] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.143596] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.144728] sdb: sdb1 sdb2 [ 1.145670] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.160421] usb 1-1: link qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 1.205114] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.205124] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.205195] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.205499] usb 2-1: usb_probe_device [ 1.205506] usb 2-1: configuration #1 chosen from 1 choice [ 1.205750] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.205827] hub 2-1:1.0: usb_probe_interface [ 1.205832] hub 2-1:1.0: usb_probe_interface - got id [ 1.205839] hub 2-1:1.0: USB hub found [ 1.206082] hub 2-1:1.0: 6 ports detected [ 1.206149] hub 2-1:1.0: standalone hub [ 1.206154] hub 2-1:1.0: individual port power switching [ 1.206157] hub 2-1:1.0: individual port over-current protection [ 1.206160] hub 2-1:1.0: Single TT [ 1.206164] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.206167] hub 2-1:1.0: power on to power good time: 100ms [ 1.206414] hub 2-1:1.0: local power source is good [ 1.206906] hub 2-1:1.0: enabling power on all ports [ 1.207826] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.207852] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.305557] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.319893] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.332893] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.333318] usb 4-1: skipped 1 descriptor after endpoint [ 1.333325] usb 4-1: skipped 1 descriptor after endpoint [ 1.333460] usb 4-1: default language 0x0409 [ 1.333789] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.333805] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.333874] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.333942] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.334004] usb 4-1: Manufacturer: MEDION [ 1.334063] usb 4-1: SerialNumber: 3180000000000000092C [ 1.334373] usb 4-1: usb_probe_device [ 1.334379] usb 4-1: configuration #1 chosen from 1 choice [ 1.335386] usb 4-1: Successful Endpoint Configure command [ 1.335482] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.335675] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.335810] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.404255] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.404273] usb 2-1: link qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 1.404394] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.460217] ata4: SATA link down (SStatus 0 SControl 300) [ 1.499692] usb 1-1.2: skipped 1 descriptor after interface [ 1.500404] usb 1-1.2: default language 0x0409 [ 1.503132] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.503142] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.503217] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.503307] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.503373] usb 1-1.2: Manufacturer: Logitech [ 1.503718] usb 1-1.2: usb_probe_device [ 1.503725] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.504348] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.504750] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.576335] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.779982] ata5: SATA link down (SStatus 0 SControl 300) [ 1.783142] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.783238] Write protecting the kernel read-only data: 12288k [ 1.789253] Freeing unused kernel memory: 1052K (ffff8800016f9000 - ffff880001800000) [ 1.794352] Freeing unused kernel memory: 956K (ffff880001b11000 - ffff880001c00000) [ 1.817876] usb 1-1.4: skipped 1 descriptor after configuration [ 1.817883] usb 1-1.4: skipped 5 descriptors after interface [ 1.817888] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.817892] usb 1-1.4: skipped 23 descriptors after interface [ 1.819943] usb 1-1.4: default language 0x0409 [ 1.831970] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.831977] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.832029] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.832093] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.832138] usb 1-1.4: Manufacturer: 123 [ 1.832345] usb 1-1.4: usb_probe_device [ 1.832349] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.832470] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.835627] udevd[121]: starting version 175 [ 1.993793] usb-storage 4-1:1.0: usb_probe_interface [ 1.993806] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.993813] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.994906] scsi6 : usb-storage 4-1:1.0 [ 1.995935] hidraw: raw HID events driver (C) Jiri Kosina [ 1.996941] usbcore: registered new interface driver usb-storage [ 1.998484] usbhid 1-1.2:1.0: usb_probe_interface [ 1.998488] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.001401] usbcore: registered new interface driver usbhid [ 2.001446] usbhid: USB HID core driver [ 2.002520] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.002588] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.002928] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 2.004129] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 2.004197] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.004512] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.004631] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.004679] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.050892] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.051285] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.076001] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.172093] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.172102] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.172169] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.172509] usb 2-1.5: usb_probe_device [ 2.172515] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.173074] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.173493] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.173841] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.173940] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403558] Switched to clocksource tsc [ 2.915486] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.995517] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.996365] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.996472] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.996989] sd 6:0:0:0: [sdc] Write Protect is off [ 2.997043] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.997525] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.999460] sdc: sdc1 sdc2 sdc3 [ 3.002052] sd 6:0:0:0: [sdc] Attached SCSI disk [ 26.224262] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 26.255401] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 26.267772] udevd[620]: starting version 175 [ 26.414226] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130626/utaddress-251) [ 26.414236] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.414241] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 26.414247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.414249] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 26.414254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.414256] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 26.414261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.414263] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 26.568226] cfg80211: Calling CRDA to update world regulatory domain [ 26.759140] cfg80211: World regulatory domain updated: [ 26.759141] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.759142] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.759143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.759144] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.759145] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.759146] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.822217] lp: driver loaded but no devices found [ 26.842856] wmi: Mapper loaded [ 26.844669] samsung_laptop: detected SABI interface: SwSmi@ [ 26.844674] samsung_laptop: Backlight controlled by ACPI video driver [ 26.938514] ppdev: user-space parallel port driver [ 26.942869] [drm] Initialized drm 1.1.0 20060810 [ 26.984442] Bluetooth: Core ver 2.16 [ 26.984496] NET: Registered protocol family 31 [ 26.984498] Bluetooth: HCI device and connection manager initialized [ 26.984517] Bluetooth: HCI socket layer initialized [ 26.984529] Bluetooth: L2CAP socket layer initialized [ 26.984556] Bluetooth: SCO socket layer initialized [ 26.989427] Linux video capture interface: v2.00 [ 27.349777] type=1400 audit(1375867197.273:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=809 comm="apparmor_parser" [ 27.350598] type=1400 audit(1375867197.273:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=809 comm="apparmor_parser" [ 27.351112] type=1400 audit(1375867197.273:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=809 comm="apparmor_parser" [ 27.351888] type=1400 audit(1375867197.273:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=871 comm="apparmor_parser" [ 27.352667] type=1400 audit(1375867197.273:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=871 comm="apparmor_parser" [ 27.353141] type=1400 audit(1375867197.273:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=871 comm="apparmor_parser" [ 27.359986] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 27.359991] Copyright(c) 2003-2013 Intel Corporation [ 27.360083] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 27.360521] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 27.415939] init: failsafe main process (1000) killed by TERM signal [ 27.552791] Bluetooth: RFCOMM TTY layer initialized [ 27.552810] Bluetooth: RFCOMM socket layer initialized [ 27.552812] Bluetooth: RFCOMM ver 1.11 [ 27.554418] btusb 2-1.5:1.0: usb_probe_interface [ 27.554423] btusb 2-1.5:1.0: usb_probe_interface - got id [ 27.554863] usbcore: registered new interface driver btusb [ 27.555000] usb 2-1.5: link qh1-0e01/ffff88011855e3c0 start 0 [1/2 us] [ 27.640644] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.640649] Bluetooth: BNEP filters: protocol multicast [ 27.640663] Bluetooth: BNEP socket layer initialized [ 27.673407] type=1400 audit(1375867197.593:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=952 comm="apparmor_parser" [ 27.675694] type=1400 audit(1375867197.597:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=952 comm="apparmor_parser" [ 27.699166] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 27.770374] type=1400 audit(1375867197.693:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1115 comm="apparmor_parser" [ 27.771189] type=1400 audit(1375867197.693:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1115 comm="apparmor_parser" [ 28.117942] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 28.133015] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 28.214709] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 28.315581] uvcvideo 1-1.4:1.0: usb_probe_interface [ 28.315595] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 28.315680] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 28.335059] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 28.335231] usbcore: registered new interface driver uvcvideo [ 28.335235] USB Video Class driver (1.1.1) [ 28.337709] usb 1-1.4: link qh16-0001/ffff88007983f1c0 start 2 [1/0 us] [ 28.337763] usb 1-1.4: unlink qh16-0001/ffff88007983f1c0 start 2 [1/0 us] [ 28.482690] [drm] Memory usable by graphics device = 2048M [ 28.482699] i915 0000:00:02.0: setting latency timer to 64 [ 28.514589] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 28.514605] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.514606] [drm] Driver supports precise vblank timestamp query. [ 28.514787] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 28.526697] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 28.526701] [drm] This can cause pipe underruns and display issues. [ 28.526703] [drm] Please upgrade your BIOS to fix this. [ 28.543111] fbcon: inteldrmfb (fb0) is primary device [ 28.713453] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 28.713455] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 28.713456] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 28.713459] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 28.713560] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.736640] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 28.753743] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.760438] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 29.033613] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 29.040243] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 29.118350] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.499474] Console: switching to colour frame buffer device 170x48 [ 29.502420] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 29.502422] i915 0000:00:02.0: registered panic notifier [ 29.522211] acpi device:33: registered as cooling_device9 [ 29.522736] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.524975] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 29.526235] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 29.528029] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 29.562927] init: alsa-restore main process (1189) terminated with status 19 [ 29.577078] usb 1-1.2: link qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 29.600138] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 29.604218] usb 1-1.2: unlink qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 29.604653] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 29.605935] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 29.804509] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 29.809921] ehci-pci 0000:00:1a.0: reused qh ffff880074e70d40 schedule [ 29.809928] usb 1-1.2: link qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 30.240768] init: plymouth-stop pre-start process (1479) terminated with status 1 [ 30.783501] usb 1-1.4: usb auto-suspend, wakeup 0 [ 31.058270] usb usb3: usb auto-resume [ 31.058290] hub 3-0:1.0: hub_resume [ 31.058340] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.058359] hub 3-0:1.0: hub_suspend [ 31.058364] usb usb3: bus auto-suspend, wakeup 1 [ 31.058896] usb 1-1.4: usb auto-resume [ 31.103262] usb 1-1.4: finish resume [ 31.110482] usb usb3: usb auto-resume [ 31.110504] hub 3-0:1.0: hub_resume [ 31.110531] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.110559] hub 3-0:1.0: hub_suspend [ 31.110567] usb usb3: bus auto-suspend, wakeup 1 [ 31.110589] usb usb3: usb auto-resume [ 31.119119] hub 3-0:1.0: hub_resume [ 31.119152] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.119176] hub 3-0:1.0: hub_suspend [ 31.119185] usb usb3: bus auto-suspend, wakeup 1 [ 31.120643] usb usb3: usb auto-resume [ 31.131141] hub 3-0:1.0: hub_resume [ 31.131181] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.131212] hub 3-0:1.0: hub_suspend [ 31.131218] usb usb3: bus auto-suspend, wakeup 1 [ 31.131287] usb usb3: usb auto-resume [ 31.143244] hub 3-0:1.0: hub_resume [ 31.143307] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.143324] hub 3-0:1.0: hub_suspend [ 31.143331] usb usb3: bus auto-suspend, wakeup 1 [ 31.150214] usb usb3: usb auto-resume [ 31.159215] hub 3-0:1.0: hub_resume [ 31.159251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.159277] hub 3-0:1.0: hub_suspend [ 31.159284] usb usb3: bus auto-suspend, wakeup 1 [ 31.159354] usb usb3: usb auto-resume [ 31.171194] hub 3-0:1.0: hub_resume [ 31.171233] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.171245] hub 3-0:1.0: hub_suspend [ 31.171253] usb usb3: bus auto-suspend, wakeup 1 [ 31.183284] usb usb3: usb auto-resume [ 31.183302] hub 3-0:1.0: hub_resume [ 31.183325] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.183346] hub 3-0:1.0: hub_suspend [ 31.183351] usb usb3: bus auto-suspend, wakeup 1 [ 31.183398] usb usb3: usb auto-resume [ 31.195073] hub 3-0:1.0: hub_resume [ 31.195138] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.195155] hub 3-0:1.0: hub_suspend [ 31.195162] usb usb3: bus auto-suspend, wakeup 1 [ 31.199136] usb usb3: usb auto-resume [ 31.211056] hub 3-0:1.0: hub_resume [ 31.211085] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.211109] hub 3-0:1.0: hub_suspend [ 31.211115] usb usb3: bus auto-suspend, wakeup 1 [ 31.211175] usb usb3: usb auto-resume [ 31.223056] hub 3-0:1.0: hub_resume [ 31.223093] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.223115] hub 3-0:1.0: hub_suspend [ 31.223124] usb usb3: bus auto-suspend, wakeup 1 [ 31.224723] usb usb3: usb auto-resume [ 31.235092] hub 3-0:1.0: hub_resume [ 31.235125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.235154] hub 3-0:1.0: hub_suspend [ 31.235162] usb usb3: bus auto-suspend, wakeup 1 [ 31.235247] usb usb3: usb auto-resume [ 31.247061] hub 3-0:1.0: hub_resume [ 31.247100] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.247125] hub 3-0:1.0: hub_suspend [ 31.247134] usb usb3: bus auto-suspend, wakeup 1 [ 31.254613] usb usb3: usb auto-resume [ 31.263029] hub 3-0:1.0: hub_resume [ 31.263071] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.263083] hub 3-0:1.0: hub_suspend [ 31.263092] usb usb3: bus auto-suspend, wakeup 1 [ 31.263174] usb usb3: usb auto-resume [ 31.275164] hub 3-0:1.0: hub_resume [ 31.275199] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.275220] hub 3-0:1.0: hub_suspend [ 31.275228] usb usb3: bus auto-suspend, wakeup 1 [ 31.276620] usb usb3: usb auto-resume [ 31.287033] hub 3-0:1.0: hub_resume [ 31.287072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.287100] hub 3-0:1.0: hub_suspend [ 31.287109] usb usb3: bus auto-suspend, wakeup 1 [ 31.287195] usb usb3: usb auto-resume [ 31.299001] hub 3-0:1.0: hub_resume [ 31.299037] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.299048] hub 3-0:1.0: hub_suspend [ 31.299058] usb usb3: bus auto-suspend, wakeup 1 [ 31.302801] usb usb3: usb auto-resume [ 31.310997] hub 3-0:1.0: hub_resume [ 31.311034] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.311062] hub 3-0:1.0: hub_suspend [ 31.311072] usb usb3: bus auto-suspend, wakeup 1 [ 31.311157] usb usb3: usb auto-resume [ 31.322982] hub 3-0:1.0: hub_resume [ 31.323026] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.323058] hub 3-0:1.0: hub_suspend [ 31.323066] usb usb3: bus auto-suspend, wakeup 1 [ 31.325034] usb usb3: usb auto-resume [ 31.335000] hub 3-0:1.0: hub_resume [ 31.335035] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.335066] hub 3-0:1.0: hub_suspend [ 31.335075] usb usb3: bus auto-suspend, wakeup 1 [ 31.335155] usb usb3: usb auto-resume [ 31.346956] hub 3-0:1.0: hub_resume [ 31.346984] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.346995] hub 3-0:1.0: hub_suspend [ 31.347002] usb usb3: bus auto-suspend, wakeup 1 [ 32.351056] usb usb3: usb auto-resume [ 32.351078] hub 3-0:1.0: hub_resume [ 32.351111] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.351143] hub 3-0:1.0: hub_suspend [ 32.351150] usb usb3: bus auto-suspend, wakeup 1 [ 32.351175] usb usb3: usb auto-resume [ 32.362298] hub 3-0:1.0: hub_resume [ 32.362332] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.362343] hub 3-0:1.0: hub_suspend [ 32.362351] usb usb3: bus auto-suspend, wakeup 1 [ 32.365122] usb usb3: usb auto-resume [ 32.374374] hub 3-0:1.0: hub_resume [ 32.374457] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.374483] hub 3-0:1.0: hub_suspend [ 32.374491] usb usb3: bus auto-suspend, wakeup 1 [ 32.374514] usb usb3: usb auto-resume [ 32.386259] hub 3-0:1.0: hub_resume [ 32.386302] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.386320] hub 3-0:1.0: hub_suspend [ 32.386329] usb usb3: bus auto-suspend, wakeup 1 [ 32.387641] usb usb3: usb auto-resume [ 32.398270] hub 3-0:1.0: hub_resume [ 32.398360] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.398391] hub 3-0:1.0: hub_suspend [ 32.398398] usb usb3: bus auto-suspend, wakeup 1 [ 32.398435] usb usb3: usb auto-resume [ 32.410218] hub 3-0:1.0: hub_resume [ 32.410249] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.410271] hub 3-0:1.0: hub_suspend [ 32.410278] usb usb3: bus auto-suspend, wakeup 1 [ 32.420463] usb usb3: usb auto-resume [ 32.430315] hub 3-0:1.0: hub_resume [ 32.430355] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.430411] hub 3-0:1.0: hub_suspend [ 32.430421] usb usb3: bus auto-suspend, wakeup 1 [ 32.430511] usb usb3: usb auto-resume [ 32.442250] hub 3-0:1.0: hub_resume [ 32.442285] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.442307] hub 3-0:1.0: hub_suspend [ 32.442316] usb usb3: bus auto-suspend, wakeup 1 [ 32.443317] usb usb3: usb auto-resume [ 32.454242] hub 3-0:1.0: hub_resume [ 32.454326] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.454354] hub 3-0:1.0: hub_suspend [ 32.454365] usb usb3: bus auto-suspend, wakeup 1 [ 32.454386] usb usb3: usb auto-resume [ 32.466216] hub 3-0:1.0: hub_resume [ 32.466285] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.466307] hub 3-0:1.0: hub_suspend [ 32.466316] usb usb3: bus auto-suspend, wakeup 1 [ 32.467939] usb usb3: usb auto-resume [ 32.478205] hub 3-0:1.0: hub_resume [ 32.478288] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.478311] hub 3-0:1.0: hub_suspend [ 32.478320] usb usb3: bus auto-suspend, wakeup 1 [ 32.478343] usb usb3: usb auto-resume [ 32.490192] hub 3-0:1.0: hub_resume [ 32.490278] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.490299] hub 3-0:1.0: hub_suspend [ 32.490307] usb usb3: bus auto-suspend, wakeup 1 [ 32.491689] usb usb3: usb auto-resume [ 32.502218] hub 3-0:1.0: hub_resume [ 32.502278] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.502331] hub 3-0:1.0: hub_suspend [ 32.502355] usb usb3: bus auto-suspend, wakeup 1 [ 32.502455] usb usb3: usb auto-resume [ 32.514206] hub 3-0:1.0: hub_resume [ 32.514297] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.514322] hub 3-0:1.0: hub_suspend [ 32.514331] usb usb3: bus auto-suspend, wakeup 1 [ 32.518471] usb usb3: usb auto-resume [ 32.530236] hub 3-0:1.0: hub_resume [ 32.530301] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.530321] hub 3-0:1.0: hub_suspend [ 32.530330] usb usb3: bus auto-suspend, wakeup 1 [ 32.530361] usb usb3: usb auto-resume [ 32.542166] hub 3-0:1.0: hub_resume [ 32.542228] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.542247] hub 3-0:1.0: hub_suspend [ 32.542254] usb usb3: bus auto-suspend, wakeup 1 [ 32.547328] usb usb3: usb auto-resume [ 32.558146] hub 3-0:1.0: hub_resume [ 32.558218] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.558251] hub 3-0:1.0: hub_suspend [ 32.558258] usb usb3: bus auto-suspend, wakeup 1 [ 32.558286] usb usb3: usb auto-resume [ 32.570138] hub 3-0:1.0: hub_resume [ 32.570221] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.570244] hub 3-0:1.0: hub_suspend [ 32.570253] usb usb3: bus auto-suspend, wakeup 1 [ 32.571422] usb usb3: usb auto-resume [ 32.582129] hub 3-0:1.0: hub_resume [ 32.582204] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.582228] hub 3-0:1.0: hub_suspend [ 32.582236] usb usb3: bus auto-suspend, wakeup 1 [ 32.582269] usb usb3: usb auto-resume [ 32.594125] hub 3-0:1.0: hub_resume [ 32.594221] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.594247] hub 3-0:1.0: hub_suspend [ 32.594256] usb usb3: bus auto-suspend, wakeup 1 [ 32.601278] usb usb3: usb auto-resume [ 32.610142] hub 3-0:1.0: hub_resume [ 32.610181] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.610252] hub 3-0:1.0: hub_suspend [ 32.610263] usb usb3: bus auto-suspend, wakeup 1 [ 32.610369] usb usb3: usb auto-resume [ 32.622103] hub 3-0:1.0: hub_resume [ 32.622143] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.622178] hub 3-0:1.0: hub_suspend [ 32.622191] usb usb3: bus auto-suspend, wakeup 1 [ 32.623882] usb usb3: usb auto-resume [ 32.634116] hub 3-0:1.0: hub_resume [ 32.634162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.634222] hub 3-0:1.0: hub_suspend [ 32.634232] usb usb3: bus auto-suspend, wakeup 1 [ 32.634328] usb usb3: usb auto-resume [ 32.646097] hub 3-0:1.0: hub_resume [ 32.646167] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.646193] hub 3-0:1.0: hub_suspend [ 32.646202] usb usb3: bus auto-suspend, wakeup 1 [ 32.647890] usb usb3: usb auto-resume [ 32.658084] hub 3-0:1.0: hub_resume [ 32.658137] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.658197] hub 3-0:1.0: hub_suspend [ 32.658207] usb usb3: bus auto-suspend, wakeup 1 [ 32.658295] usb usb3: usb auto-resume [ 32.670070] hub 3-0:1.0: hub_resume [ 32.670127] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.670151] hub 3-0:1.0: hub_suspend [ 32.670161] usb usb3: bus auto-suspend, wakeup 1 [ 32.671962] usb usb3: usb auto-resume [ 32.682069] hub 3-0:1.0: hub_resume [ 32.682114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.682160] hub 3-0:1.0: hub_suspend [ 32.682169] usb usb3: bus auto-suspend, wakeup 1 [ 32.682257] usb usb3: usb auto-resume [ 32.694060] hub 3-0:1.0: hub_resume [ 32.694108] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.694153] hub 3-0:1.0: hub_suspend [ 32.694164] usb usb3: bus auto-suspend, wakeup 1 [ 32.696136] usb usb3: usb auto-resume [ 32.706092] hub 3-0:1.0: hub_resume [ 32.706169] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.706242] hub 3-0:1.0: hub_suspend [ 32.706253] usb usb3: bus auto-suspend, wakeup 1 [ 32.706368] usb usb3: usb auto-resume [ 32.718086] hub 3-0:1.0: hub_resume [ 32.718157] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.718175] hub 3-0:1.0: hub_suspend [ 32.718188] usb usb3: bus auto-suspend, wakeup 1 [ 32.721140] usb usb3: usb auto-resume [ 32.730074] hub 3-0:1.0: hub_resume [ 32.730138] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.730202] hub 3-0:1.0: hub_suspend [ 32.730214] usb usb3: bus auto-suspend, wakeup 1 [ 32.730325] usb usb3: usb auto-resume [ 32.742064] hub 3-0:1.0: hub_resume [ 32.742126] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.742147] hub 3-0:1.0: hub_suspend [ 32.742161] usb usb3: bus auto-suspend, wakeup 1 [ 32.746462] usb usb3: usb auto-resume [ 32.758099] hub 3-0:1.0: hub_resume [ 32.758156] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.758203] hub 3-0:1.0: hub_suspend [ 32.758213] usb usb3: bus auto-suspend, wakeup 1 [ 32.758313] usb usb3: usb auto-resume [ 32.770065] hub 3-0:1.0: hub_resume [ 32.770156] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.770184] hub 3-0:1.0: hub_suspend [ 32.770194] usb usb3: bus auto-suspend, wakeup 1 [ 32.771920] usb usb3: usb auto-resume [ 32.782033] hub 3-0:1.0: hub_resume [ 32.782117] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.782144] hub 3-0:1.0: hub_suspend [ 32.782155] usb usb3: bus auto-suspend, wakeup 1 [ 32.782202] usb usb3: usb auto-resume [ 32.794012] hub 3-0:1.0: hub_resume [ 32.794065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.794083] hub 3-0:1.0: hub_suspend [ 32.794093] usb usb3: bus auto-suspend, wakeup 1 [ 32.796112] usb usb3: usb auto-resume [ 32.806026] hub 3-0:1.0: hub_resume [ 32.806118] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.806146] hub 3-0:1.0: hub_suspend [ 32.806156] usb usb3: bus auto-suspend, wakeup 1 [ 32.806196] usb usb3: usb auto-resume [ 32.818052] hub 3-0:1.0: hub_resume [ 32.818144] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.818182] hub 3-0:1.0: hub_suspend [ 32.818192] usb usb3: bus auto-suspend, wakeup 1 [ 32.820289] usb usb3: usb auto-resume [ 32.830076] hub 3-0:1.0: hub_resume [ 32.830172] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.830209] hub 3-0:1.0: hub_suspend [ 32.830219] usb usb3: bus auto-suspend, wakeup 1 [ 32.830262] usb usb3: usb auto-resume [ 32.841997] hub 3-0:1.0: hub_resume [ 32.842078] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.842105] hub 3-0:1.0: hub_suspend [ 32.842116] usb usb3: bus auto-suspend, wakeup 1 [ 32.844669] usb usb3: usb auto-resume [ 32.854040] hub 3-0:1.0: hub_resume [ 32.854134] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.854170] hub 3-0:1.0: hub_suspend [ 32.854179] usb usb3: bus auto-suspend, wakeup 1 [ 32.854218] usb usb3: usb auto-resume [ 32.865993] hub 3-0:1.0: hub_resume [ 32.866070] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.866096] hub 3-0:1.0: hub_suspend [ 32.866105] usb usb3: bus auto-suspend, wakeup 1 [ 33.868980] usb usb3: usb auto-resume [ 33.869006] hub 3-0:1.0: hub_resume [ 33.869084] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.869128] hub 3-0:1.0: hub_suspend [ 33.869136] usb usb3: bus auto-suspend, wakeup 1 [ 33.872512] usb usb3: usb auto-resume [ 33.881307] hub 3-0:1.0: hub_resume [ 33.881375] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.881399] hub 3-0:1.0: hub_suspend [ 33.881408] usb usb3: bus auto-suspend, wakeup 1 [ 33.881443] usb usb3: usb auto-resume [ 33.893258] hub 3-0:1.0: hub_resume [ 33.893340] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.893365] hub 3-0:1.0: hub_suspend [ 33.893375] usb usb3: bus auto-suspend, wakeup 1 [ 33.897591] usb usb3: usb auto-resume [ 33.909258] hub 3-0:1.0: hub_resume [ 33.909303] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.909352] hub 3-0:1.0: hub_suspend [ 33.909360] usb usb3: bus auto-suspend, wakeup 1 [ 33.909469] usb usb3: usb auto-resume [ 33.921227] hub 3-0:1.0: hub_resume [ 33.921290] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.921307] hub 3-0:1.0: hub_suspend [ 33.921320] usb usb3: bus auto-suspend, wakeup 1 [ 33.923185] usb usb3: usb auto-resume [ 33.933209] hub 3-0:1.0: hub_resume [ 33.933267] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.933326] hub 3-0:1.0: hub_suspend [ 33.933335] usb usb3: bus auto-suspend, wakeup 1 [ 33.933439] usb usb3: usb auto-resume [ 33.945194] hub 3-0:1.0: hub_resume [ 33.945249] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.945266] hub 3-0:1.0: hub_suspend [ 33.945278] usb usb3: bus auto-suspend, wakeup 1 [ 33.948412] usb usb3: usb auto-resume [ 33.957209] hub 3-0:1.0: hub_resume [ 33.957261] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.957315] hub 3-0:1.0: hub_suspend [ 33.957324] usb usb3: bus auto-suspend, wakeup 1 [ 33.957420] usb usb3: usb auto-resume [ 33.969194] hub 3-0:1.0: hub_resume [ 33.969247] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.969265] hub 3-0:1.0: hub_suspend [ 33.969280] usb usb3: bus auto-suspend, wakeup 1 [ 33.974179] usb usb3: usb auto-resume [ 33.985179] hub 3-0:1.0: hub_resume [ 33.985227] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.985288] hub 3-0:1.0: hub_suspend [ 33.985297] usb usb3: bus auto-suspend, wakeup 1 [ 33.985387] usb usb3: usb auto-resume [ 33.997175] hub 3-0:1.0: hub_resume [ 33.997218] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.997243] hub 3-0:1.0: hub_suspend [ 33.997252] usb usb3: bus auto-suspend, wakeup 1 [ 34.000936] usb usb3: usb auto-resume [ 34.009165] hub 3-0:1.0: hub_resume [ 34.009215] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.009249] hub 3-0:1.0: hub_suspend [ 34.009257] usb usb3: bus auto-suspend, wakeup 1 [ 34.009342] usb usb3: usb auto-resume [ 34.021139] hub 3-0:1.0: hub_resume [ 34.021199] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.021218] hub 3-0:1.0: hub_suspend [ 34.021229] usb usb3: bus auto-suspend, wakeup 1 [ 34.068243] usb usb3: usb auto-resume [ 34.068265] hub 3-0:1.0: hub_resume [ 34.068292] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.068323] hub 3-0:1.0: hub_suspend [ 34.068330] usb usb3: bus auto-suspend, wakeup 1 [ 34.068358] usb usb3: usb auto-resume [ 34.077080] hub 3-0:1.0: hub_resume [ 34.077170] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.077186] hub 3-0:1.0: hub_suspend [ 34.077193] usb usb3: bus auto-suspend, wakeup 1 [ 35.298582] wlan0: authenticate with 00:04:0e:e4:00:3d [ 35.302872] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 35.304658] wlan0: authenticated [ 35.304904] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 35.304912] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 35.308186] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 35.312673] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 35.320556] wlan0: associated [ 35.320667] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.763204] usb 1-1.4: usb auto-suspend, wakeup 0 [ 37.426124] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 37.471863] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 40.691040] usb 2-1.5: unlink qh1-0e01/ffff88011855e3c0 start 0 [1/2 us] [ 40.942855] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 40.943120] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 40.943129] usb 2-1.5: USB disconnect, device number 3 [ 40.943132] usb 2-1.5: unregistering device [ 40.943137] usb 2-1.5: unregistering interface 2-1.5:1.0 [ 40.943710] usb 2-1.5: unregistering interface 2-1.5:1.1 [ 40.943977] usb 2-1.5: usb_disable_device nuking all URBs [ 41.072286] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 41.072306] hub 2-1:1.0: hub_suspend [ 41.072316] usb 2-1: unlink qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 41.074660] usb 2-1: usb auto-suspend, wakeup 1 [ 41.088051] hub 2-0:1.0: hub_suspend [ 41.088061] usb usb2: bus auto-suspend, wakeup 1 [ 41.088073] ehci-pci 0000:00:1d.0: suspend root hub [ 87.558667] usb 1-1.2: unlink qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.571459] ehci-pci 0000:00:1a.0: reused qh ffff880074e70d40 schedule [ 87.571483] usb 1-1.2: link qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.590621] usb 1-1.2: unlink qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.615416] ehci-pci 0000:00:1a.0: reused qh ffff880074e70d40 schedule [ 87.615423] usb 1-1.2: link qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.638638] usb 1-1.2: unlink qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.687437] ehci-pci 0000:00:1a.0: reused qh ffff880074e70d40 schedule [ 87.687453] usb 1-1.2: link qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.710567] usb 1-1.2: unlink qh8-0e01/ffff880074e70d40 start 3 [1/2 us] [ 87.740348] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 [ 87.740659] hub 1-1:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 87.740664] usb 1-1.2: USB disconnect, device number 3 [ 87.740667] usb 1-1.2: unregistering device [ 87.740669] usb 1-1.2: unregistering interface 1-1.2:1.0 [ 87.771777] usb 1-1.2: usb_disable_device nuking all URBs [ 87.899628] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 87.899649] hub 1-1:1.0: hub_suspend [ 87.899656] usb 1-1: unlink qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 87.902031] usb 1-1: usb auto-suspend, wakeup 1 [ 87.915438] hub 1-0:1.0: hub_suspend [ 87.915453] usb usb1: bus auto-suspend, wakeup 1 [ 87.915457] ehci-pci 0000:00:1a.0: suspend root hub [ 90.200571] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 90.200605] hub 4-0:1.0: warm reset port 1 [ 90.318961] hub 4-0:1.0: port 1, status 02c0, change 0001, 5.0 Gb/s [ 90.318970] usb 4-1: USB disconnect, device number 2 [ 90.318972] usb 4-1: unregistering device [ 90.318975] usb 4-1: unregistering interface 4-1:1.0 [ 90.320585] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [ 90.320663] sd 6:0:0:0: [sdc] [ 90.320667] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 90.323925] usb 4-1: usb_disable_device nuking all URBs [ 90.324614] usb 4-1: Successful Endpoint Configure command [ 90.450938] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x2a0 [ 90.450945] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 90.450988] hub 4-0:1.0: hub_suspend [ 90.450995] usb usb4: bus auto-suspend, wakeup 1 [ 5465.252607] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3) [ 5465.284551] cfg80211: Calling CRDA to update world regulatory domain [ 5465.293583] cfg80211: World regulatory domain updated: [ 5465.293588] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5465.293591] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5465.293594] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5465.293595] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5465.293597] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5465.293599] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5467.724074] PM: Syncing filesystems ... done. [ 5467.973575] PM: Preparing system for mem sleep [ 5467.974121] Freezing user space processes ... [ 5487.970574] Freezing of tasks failed after 20.010 seconds (1 tasks refusing to freeze, wq_busy=0): [ 5487.970591] DOM Worker D ffffffff81811820 0 2437 1 0x00000004 [ 5487.970595] ffff880056ca3ca8 0000000000000002 00000000002d627f 000009af00000002 [ 5487.970598] ffff880066ede640 ffff880056ca3fd8 ffff880056ca3fd8 ffff880056ca3fd8 [ 5487.970601] ffff880119f98340 ffff880066ede640 ffff880056ca3ca8 ffff88011fad5118 [ 5487.970604] Call Trace: [ 5487.970612] [<ffffffff81144360>] ? __lock_page+0x70/0x70 [ 5487.970615] [<ffffffff816e8179>] schedule+0x29/0x70 [ 5487.970618] [<ffffffff816e824f>] io_schedule+0x8f/0xd0 [ 5487.970621] [<ffffffff8114436e>] sleep_on_page+0xe/0x20 [ 5487.970624] [<ffffffff816e4be2>] __wait_on_bit+0x62/0x90 [ 5487.970627] [<ffffffff81144f9b>] ? find_get_pages_tag+0xcb/0x170 [ 5487.970630] [<ffffffff811444d0>] wait_on_page_bit+0x80/0x90 [ 5487.970633] [<ffffffff8108a0e0>] ? wake_atomic_t_function+0x40/0x40 [ 5487.970636] [<ffffffff811445ec>] filemap_fdatawait_range+0x10c/0x190 [ 5487.970640] [<ffffffff81145ce0>] filemap_write_and_wait_range+0x50/0x80 [ 5487.970644] [<ffffffff81246c3d>] ext4_sync_file+0x15d/0x340 [ 5487.970648] [<ffffffff811db8dd>] do_fsync+0x5d/0x90 [ 5487.970651] [<ffffffff811dbcc0>] SyS_fsync+0x10/0x20 [ 5487.970655] [<ffffffff816f25ef>] tracesys+0xe1/0xe6 [ 5487.970658] [ 5487.970659] Restarting tasks ... done. [ 5487.978372] video LNXVIDEO:00: Restoring backlight state [ 5489.264050] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 5489.270710] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 5489.372860] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5495.647108] wlan0: authenticate with 00:04:0e:e4:00:3d [ 5495.650169] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 5495.652041] wlan0: authenticated [ 5495.652211] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5495.652216] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 5495.653586] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 5495.657079] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 5495.661234] wlan0: associated [ 5495.661351] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5548.149727] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3) [ 5548.159582] cfg80211: Calling CRDA to update world regulatory domain [ 5548.167216] cfg80211: World regulatory domain updated: [ 5548.167221] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5548.167223] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5548.167225] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5548.167227] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5548.167229] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5548.167230] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5549.073189] PM: Syncing filesystems ... done. [ 5549.179076] PM: Preparing system for mem sleep [ 5549.179429] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5549.180474] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5549.181577] PM: Entering mem sleep [ 5549.181664] Suspending console(s) (use no_console_suspend to debug) [ 5549.182064] usb usb2: usb auto-resume [ 5549.182066] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 5549.182068] ehci-pci 0000:00:1d.0: resume root hub [ 5549.182081] hub 2-0:1.0: hub_resume [ 5549.182092] hub 2-0:1.0: port 1: status 0507 change 0000 [ 5549.182112] usb 2-1: usb auto-resume [ 5549.182175] usb usb1: usb auto-resume [ 5549.182179] ehci-pci 0000:00:1a.0: resume root hub [ 5549.182191] hub 1-0:1.0: hub_resume [ 5549.182199] hub 1-0:1.0: port 1: status 0507 change 0000 [ 5549.182213] usb 1-1: usb auto-resume [ 5549.182218] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5549.182346] sd 0:0:0:0: [sda] Stopping disk [ 5549.184609] sd 1:0:0:0: [sdb] Stopping disk [ 5549.193803] usb usb4: usb auto-resume [ 5549.193806] usb usb3: usb auto-resume [ 5549.193820] hub 4-0:1.0: hub_resume [ 5549.193838] hub 3-0:1.0: hub_resume [ 5549.193850] hub 4-0:1.0: hub_suspend [ 5549.193851] hub 3-0:1.0: hub_suspend [ 5549.193855] usb usb4: bus suspend, wakeup 0 [ 5549.193856] usb usb3: bus suspend, wakeup 0 [ 5549.194309] mei_me 0000:00:16.0: suspend [ 5549.212455] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 5549.212457] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 5549.228426] usb 2-1: finish resume [ 5549.228444] usb 1-1: finish resume [ 5549.228716] hub 2-1:1.0: hub_resume [ 5549.228926] hub 1-1:1.0: hub_resume [ 5549.229727] ehci-pci 0000:00:1d.0: reused qh ffff88003784fcc0 schedule [ 5549.229730] hub 1-1:1.0: port 4: status 0507 change 0000 [ 5549.229733] usb 2-1: link qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5549.229740] hub 2-1:1.0: hub_suspend [ 5549.229744] usb 2-1: unlink qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5549.229984] ehci-pci 0000:00:1a.0: reused qh ffff8800379e88c0 schedule [ 5549.229987] usb 1-1: link qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5549.229993] hub 1-1:1.0: hub_suspend [ 5549.229996] usb 1-1: unlink qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5549.231884] usb 2-1: usb suspend, wakeup 0 [ 5549.231896] hub 2-0:1.0: hub_suspend [ 5549.231903] usb usb2: bus suspend, wakeup 0 [ 5549.231904] ehci-pci 0000:00:1d.0: suspend root hub [ 5549.232133] usb 1-1: usb suspend, wakeup 0 [ 5549.232146] hub 1-0:1.0: hub_suspend [ 5549.232150] usb usb1: bus suspend, wakeup 0 [ 5549.232152] ehci-pci 0000:00:1a.0: suspend root hub [ 5549.788452] PM: suspend of devices complete after 606.621 msecs [ 5549.788708] PM: late suspend of devices complete after 0.252 msecs [ 5549.788932] xhci_hcd 0000:03:00.0: wakeup: 1 [ 5549.804338] xhci_hcd 0000:03:00.0: --> PCI D3hot [ 5549.804427] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 5549.836400] ehci-pci 0000:00:1d.0: wakeup: 1 [ 5549.852291] ehci-pci 0000:00:1d.0: --> PCI D3hot [ 5549.852474] ehci-pci 0000:00:1a.0: wakeup: 1 [ 5549.868287] ehci-pci 0000:00:1a.0: --> PCI D3hot [ 5549.884338] PM: noirq suspend of devices complete after 95.647 msecs [ 5549.884604] ACPI: Preparing to enter system sleep state S3 [ 5549.885610] PM: Saving platform NVS memory [ 5549.887434] Disabling non-boot CPUs ... [ 5549.888856] smpboot: CPU 1 is now offline [ 5549.992265] smpboot: CPU 2 is now offline [ 5549.993109] Broke affinity for irq 9 [ 5549.993119] Broke affinity for irq 16 [ 5550.096251] smpboot: CPU 3 is now offline [ 5550.098100] ACPI: Low-level resume complete [ 5550.098155] PM: Restoring platform NVS memory [ 5550.099473] Enabling non-boot CPUs ... [ 5550.100562] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5550.111581] Disabled fast string operations [ 5550.114004] Intel pstate controlling: cpu 1 [ 5550.114087] CPU1 is up [ 5550.115185] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 5550.126124] Disabled fast string operations [ 5550.128567] Intel pstate controlling: cpu 2 [ 5550.128647] CPU2 is up [ 5550.129715] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5550.140653] Disabled fast string operations [ 5550.143135] Intel pstate controlling: cpu 3 [ 5550.143212] CPU3 is up [ 5550.148109] ACPI: Waking up from system sleep state S3 [ 5550.295043] PM: noirq resume of devices complete after 143.812 msecs [ 5550.295273] PM: early resume of devices complete after 0.191 msecs [ 5550.295320] i915 0000:00:02.0: setting latency timer to 64 [ 5550.295349] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 5550.295545] ahci 0000:00:1f.2: setting latency timer to 64 [ 5550.295688] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio. [ 5550.295710] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 5550.295739] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 5550.295784] usb usb3: root hub lost power or was reset [ 5550.295786] usb usb4: root hub lost power or was reset [ 5550.300497] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 5550.300897] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 5550.300954] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 5550.301156] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 5550.301200] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 5550.301210] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 5550.301243] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X [ 5550.301567] usb usb1: usb resume [ 5550.301571] ehci-pci 0000:00:1a.0: resume root hub [ 5550.301905] usb usb2: usb resume [ 5550.301909] ehci-pci 0000:00:1d.0: resume root hub [ 5550.302217] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 5550.302218] [drm] This can cause pipe underruns and display issues. [ 5550.302219] [drm] Please upgrade your BIOS to fix this. [ 5550.302283] usb usb3: usb resume [ 5550.302307] hub 3-0:1.0: hub_reset_resume [ 5550.302312] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5550.302749] usb usb4: usb resume [ 5550.302769] hub 4-0:1.0: hub_reset_resume [ 5550.302771] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5550.333768] hub 2-0:1.0: hub_resume [ 5550.333770] hub 1-0:1.0: hub_resume [ 5550.333784] hub 2-0:1.0: port 1: status 0503 change 0000 [ 5550.333786] hub 1-0:1.0: port 1: status 0503 change 0000 [ 5550.333834] usb 1-1: finish resume [ 5550.333841] usb 2-1: finish resume [ 5550.333978] hub 2-1:1.0: hub_resume [ 5550.333979] hub 1-1:1.0: hub_resume [ 5550.334468] hub 1-1:1.0: port 4: status 0101 change 0001 [ 5550.334592] hub 2-1:1.0: port 5: status 0101 change 0001 [ 5550.438782] ehci-pci 0000:00:1d.0: reused qh ffff88003784fcc0 schedule [ 5550.438802] usb 2-1: link qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5550.438847] ehci-pci 0000:00:1a.0: reused qh ffff8800379e88c0 schedule [ 5550.438851] usb 1-1: link qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5550.439054] usb 1-1.4: finish reset-resume [ 5550.510909] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 5550.638742] ata4: SATA link down (SStatus 0 SControl 300) [ 5550.646742] ata5: SATA link down (SStatus 0 SControl 300) [ 5550.654783] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5550.658878] ata2.00: configured for UDMA/133 [ 5550.674818] sd 1:0:0:0: [sdb] Starting disk [ 5551.414598] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5552.766338] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5552.768625] ata1.00: configured for UDMA/133 [ 5552.782463] sd 0:0:0:0: [sda] Starting disk [ 5552.807470] PM: resume of devices complete after 2512.713 msecs [ 5552.807848] PM: Finishing wakeup. [ 5552.807921] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 5552.807943] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 5552.807954] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5552.807959] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5552.807963] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0020 [ 5552.807849] Restarting tasks ... done. [ 5552.809809] hub 4-0:1.0: hub_suspend [ 5552.809819] usb usb4: bus auto-suspend, wakeup 1 [ 5552.809836] hub 3-0:1.0: hub_suspend [ 5552.809840] usb usb3: bus auto-suspend, wakeup 1 [ 5552.811526] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 5552.856253] video LNXVIDEO:00: Restoring backlight state [ 5552.938364] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 5552.938377] hub 1-1:1.0: state 7 ports 6 chg 0010 evt 0010 [ 5552.938398] hub 2-1:1.0: hub_suspend [ 5552.938405] usb 2-1: unlink qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5552.938486] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s [ 5552.940615] usb 2-1: usb auto-suspend, wakeup 1 [ 5552.954226] hub 2-0:1.0: hub_suspend [ 5552.954237] usb usb2: bus auto-suspend, wakeup 1 [ 5552.954240] ehci-pci 0000:00:1d.0: suspend root hub [ 5553.394987] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 5553.401702] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 5553.422263] usb 1-1.4: usb auto-suspend, wakeup 0 [ 5553.438110] hub 1-1:1.0: hub_suspend [ 5553.438118] usb 1-1: unlink qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5553.440378] usb 1-1: usb auto-suspend, wakeup 1 [ 5553.454105] hub 1-0:1.0: hub_suspend [ 5553.454115] usb usb1: bus auto-suspend, wakeup 1 [ 5553.454119] ehci-pci 0000:00:1a.0: suspend root hub [ 5553.486879] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5559.827893] wlan0: authenticate with 00:04:0e:e4:00:3d [ 5559.832099] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 5559.834105] wlan0: authenticated [ 5559.834268] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5559.834273] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 5559.840811] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 5559.844643] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 5559.852062] wlan0: associated [ 5559.852160] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5574.539617] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3) [ 5574.571955] cfg80211: Calling CRDA to update world regulatory domain [ 5574.578626] cfg80211: World regulatory domain updated: [ 5574.578629] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5574.578631] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5574.578633] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5574.578634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5574.578636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5574.578637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5576.140595] PM: Syncing filesystems ... done. [ 5576.262900] PM: Preparing system for mem sleep [ 5576.263218] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5576.264629] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5576.265821] PM: Entering mem sleep [ 5576.265917] Suspending console(s) (use no_console_suspend to debug) [ 5576.266342] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 5576.266362] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5576.266363] usb usb1: usb auto-resume [ 5576.266368] ehci-pci 0000:00:1a.0: resume root hub [ 5576.266384] usb usb2: usb auto-resume [ 5576.266386] hub 1-0:1.0: hub_resume [ 5576.266387] ehci-pci 0000:00:1d.0: resume root hub [ 5576.266399] hub 1-0:1.0: port 1: status 0507 change 0000 [ 5576.266401] hub 2-0:1.0: hub_resume [ 5576.266408] hub 2-0:1.0: port 1: status 0507 change 0000 [ 5576.266423] usb 1-1: usb auto-resume [ 5576.266424] usb 2-1: usb auto-resume [ 5576.266652] sd 0:0:0:0: [sda] Stopping disk [ 5576.269260] sd 1:0:0:0: [sdb] Stopping disk [ 5576.278258] usb usb4: usb auto-resume [ 5576.278264] usb usb3: usb auto-resume [ 5576.278277] hub 4-0:1.0: hub_resume [ 5576.278295] hub 3-0:1.0: hub_resume [ 5576.278309] hub 4-0:1.0: hub_suspend [ 5576.278313] hub 3-0:1.0: hub_suspend [ 5576.278316] usb usb4: bus suspend, wakeup 0 [ 5576.278317] usb usb3: bus suspend, wakeup 0 [ 5576.278629] mei_me 0000:00:16.0: suspend [ 5576.296885] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 5576.296887] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 5576.312881] usb 2-1: finish resume [ 5576.312883] usb 1-1: finish resume [ 5576.313335] hub 1-1:1.0: hub_resume [ 5576.313403] hub 2-1:1.0: hub_resume [ 5576.314084] hub 1-1:1.0: port 4: status 0507 change 0000 [ 5576.314408] ehci-pci 0000:00:1a.0: reused qh ffff8800379e88c0 schedule [ 5576.314412] usb 1-1: link qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5576.314418] hub 1-1:1.0: hub_suspend [ 5576.314422] usb 1-1: unlink qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5576.314634] ehci-pci 0000:00:1d.0: reused qh ffff88003784fcc0 schedule [ 5576.314639] usb 2-1: link qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5576.314648] hub 2-1:1.0: hub_suspend [ 5576.314653] usb 2-1: unlink qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5576.316581] usb 2-1: usb suspend, wakeup 0 [ 5576.316684] hub 2-0:1.0: hub_suspend [ 5576.316686] usb 1-1: usb suspend, wakeup 0 [ 5576.316690] usb usb2: bus suspend, wakeup 0 [ 5576.316692] ehci-pci 0000:00:1d.0: suspend root hub [ 5576.316737] hub 1-0:1.0: hub_suspend [ 5576.316743] usb usb1: bus suspend, wakeup 0 [ 5576.316745] ehci-pci 0000:00:1a.0: suspend root hub [ 5576.876221] PM: suspend of devices complete after 610.744 msecs [ 5576.876465] PM: late suspend of devices complete after 0.227 msecs [ 5576.876717] xhci_hcd 0000:03:00.0: wakeup: 1 [ 5576.892102] xhci_hcd 0000:03:00.0: --> PCI D3hot [ 5576.892215] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 5576.924167] ehci-pci 0000:00:1d.0: wakeup: 1 [ 5576.940003] ehci-pci 0000:00:1d.0: --> PCI D3hot [ 5576.940237] ehci-pci 0000:00:1a.0: wakeup: 1 [ 5576.955983] ehci-pci 0000:00:1a.0: --> PCI D3hot [ 5576.972072] PM: noirq suspend of devices complete after 95.720 msecs [ 5576.972337] ACPI: Preparing to enter system sleep state S3 [ 5576.973588] PM: Saving platform NVS memory [ 5576.975426] Disabling non-boot CPUs ... [ 5576.977168] smpboot: CPU 1 is now offline [ 5577.079822] smpboot: CPU 2 is now offline [ 5577.183737] smpboot: CPU 3 is now offline [ 5577.185736] ACPI: Low-level resume complete [ 5577.185790] PM: Restoring platform NVS memory [ 5577.187122] Enabling non-boot CPUs ... [ 5577.188208] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5577.199223] Disabled fast string operations [ 5577.201654] Intel pstate controlling: cpu 1 [ 5577.201738] CPU1 is up [ 5577.202807] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 5577.213748] Disabled fast string operations [ 5577.216172] Intel pstate controlling: cpu 2 [ 5577.216254] CPU2 is up [ 5577.217321] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5577.228259] Disabled fast string operations [ 5577.230768] Intel pstate controlling: cpu 3 [ 5577.230848] CPU3 is up [ 5577.235752] ACPI: Waking up from system sleep state S3 [ 5577.382306] PM: noirq resume of devices complete after 143.309 msecs [ 5577.382536] PM: early resume of devices complete after 0.191 msecs [ 5577.382582] i915 0000:00:02.0: setting latency timer to 64 [ 5577.382610] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 5577.382955] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 5577.383470] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 5577.383476] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 5577.383495] ahci 0000:00:1f.2: setting latency timer to 64 [ 5577.386753] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 5577.386808] usb usb3: root hub lost power or was reset [ 5577.386810] usb usb4: root hub lost power or was reset [ 5577.386979] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio. [ 5577.389822] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 5577.389824] [drm] This can cause pipe underruns and display issues. [ 5577.389824] [drm] Please upgrade your BIOS to fix this. [ 5577.391501] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 5577.391512] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 5577.391522] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 5577.391532] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 5577.391542] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X [ 5577.392083] usb usb1: usb resume [ 5577.392086] ehci-pci 0000:00:1a.0: resume root hub [ 5577.392125] usb usb2: usb resume [ 5577.392129] ehci-pci 0000:00:1d.0: resume root hub [ 5577.392231] usb usb3: usb resume [ 5577.392254] hub 3-0:1.0: hub_reset_resume [ 5577.392256] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5577.392392] usb usb4: usb resume [ 5577.392412] hub 4-0:1.0: hub_reset_resume [ 5577.392414] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5577.425069] hub 1-0:1.0: hub_resume [ 5577.425073] hub 2-0:1.0: hub_resume [ 5577.425110] hub 2-0:1.0: port 1: status 0503 change 0000 [ 5577.425112] hub 1-0:1.0: port 1: status 0503 change 0000 [ 5577.425166] usb 1-1: finish resume [ 5577.425168] usb 2-1: finish resume [ 5577.425337] hub 1-1:1.0: hub_resume [ 5577.425362] hub 2-1:1.0: hub_resume [ 5577.426318] hub 1-1:1.0: port 4: status 0101 change 0001 [ 5577.426609] hub 2-1:1.0: port 5: status 0101 change 0001 [ 5577.529887] ehci-pci 0000:00:1d.0: reused qh ffff88003784fcc0 schedule [ 5577.529908] ehci-pci 0000:00:1a.0: reused qh ffff8800379e88c0 schedule [ 5577.529911] usb 2-1: link qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5577.529914] usb 1-1: link qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5577.530108] usb 1-1.4: finish reset-resume [ 5577.602057] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 5577.725651] ata5: SATA link down (SStatus 0 SControl 300) [ 5577.733649] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5577.737627] ata2.00: configured for UDMA/133 [ 5577.741640] ata4: SATA link down (SStatus 0 SControl 300) [ 5577.753712] sd 1:0:0:0: [sdb] Starting disk [ 5578.393199] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5579.843174] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5579.845531] ata1.00: configured for UDMA/133 [ 5579.859246] sd 0:0:0:0: [sda] Starting disk [ 5579.885795] PM: resume of devices complete after 2506.277 msecs [ 5579.886170] PM: Finishing wakeup. [ 5579.886248] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5579.886257] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5579.886263] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5579.886268] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5579.886273] hub 1-1:1.0: state 7 ports 6 chg 0010 evt 0010 [ 5579.888246] hub 4-0:1.0: hub_suspend [ 5579.888256] usb usb4: bus auto-suspend, wakeup 1 [ 5579.888276] hub 3-0:1.0: hub_suspend [ 5579.888282] usb usb3: bus auto-suspend, wakeup 1 [ 5579.890214] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s [ 5579.890226] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0020 [ 5579.891596] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 5579.886171] Restarting tasks ... done. [ 5579.924492] video LNXVIDEO:00: Restoring backlight state [ 5580.018888] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 5580.018909] hub 2-1:1.0: hub_suspend [ 5580.018918] usb 2-1: unlink qh256-0001/ffff88003784fcc0 start 1 [1/0 us] [ 5580.021130] usb 2-1: usb auto-suspend, wakeup 1 [ 5580.034841] hub 2-0:1.0: hub_suspend [ 5580.034853] usb usb2: bus auto-suspend, wakeup 1 [ 5580.034857] ehci-pci 0000:00:1d.0: suspend root hub [ 5580.402507] usb 1-1.4: usb auto-suspend, wakeup 0 [ 5580.418357] hub 1-1:1.0: hub_suspend [ 5580.418372] usb 1-1: unlink qh256-0001/ffff8800379e88c0 start 1 [1/0 us] [ 5580.420600] usb 1-1: usb auto-suspend, wakeup 1 [ 5580.434335] hub 1-0:1.0: hub_suspend [ 5580.434349] usb usb1: bus auto-suspend, wakeup 1 [ 5580.434353] ehci-pci 0000:00:1a.0: suspend root hub [ 5580.460465] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 5580.467276] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 5580.551520] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5586.903444] wlan0: authenticate with 00:04:0e:e4:00:3d [ 5586.906988] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 5586.908720] wlan0: authenticated [ 5586.908922] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5586.908927] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 5586.910543] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 5586.914806] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 5586.921555] wlan0: associated [ 5586.921659] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Attachment:
config-3.11.0-rc4-next20130807-1-iniza-small
Description: Binary data
