This patch introduces a MFD core device driver for OMAP system control module.
The control module allows software control of various static modes supported by the device.
It is composed of two control submodules: general control module and device (padconfiguration) control module.
Changes since previous version:
- omap-control-core: resources aren't hardcoded, they are specified in dts file.
- omap-control-core: Control module is a built-in driver - added control module select to ARCH_HAS_CONTROL_MODULE and ARCH_OMAP4.
Probably, no configuration option is required!
- omap-control-core: Added early init call that ioremaps control module IOMEM window, this allows access of SCM registers very early, for example from omap_type()
- omap-control-core: Removed device pointer from omap-control-core API arguments, becuase there can be only one instance control
module device.
- omap-control-core: removed omap_control_get, omap_control_readl, omap_control_writel
- omap-control-core: added omap_control_status_read that is used early in omap_type
Signed-off-by: Konstantin Baydarov <kbaidarov@xxxxxxxxxxxxx>
Signed-off-by: J Keerthy <j-keerthy@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
---
.../devicetree/bindings/mfd/omap_control.txt | 44 +++++++
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/plat-omap/Kconfig | 4 +
drivers/mfd/Kconfig | 9 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/omap-control-core.c | 131 ++++++++++++++++++++
include/linux/mfd/omap_control.h | 52 ++++++++
7 files changed, 242 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
create mode 100644 drivers/mfd/omap-control-core.c
create mode 100644 include/linux/mfd/omap_control.h
diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt b/Documentation/devicetree/bindings/mfd/omap_control.txt
new file mode 100644
index 0000000..46d5e7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
@@ -0,0 +1,44 @@
+* Texas Instrument OMAP System Control Module (SCM) bindings
+
+The control module allows software control of various static modes supported by
+the device. The control module controls the settings of various device modules
+through register configuration and internal signals. It also controls the pad
+configuration, pin functional multiplexing, and the routing of internal signals
+(such as PRCM signals or DMA requests) to output pins configured for hardware
+observability.
+
+Required properties:
+- compatible : Should be:
+ - "ti,omap3-control" for OMAP3 support
+ - "ti,omap4-control" for OMAP4 support
+ - "ti,omap5-control" for OMAP5 support
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the control module:
+ Should be "ctrl_module_core";
+
+Sub-nodes:
+- bandgap : contains the bandgap node
+
+ The bindings details of individual bandgap device can be found in:
+ Documentation/devicetree/bindings/thermal/omap_bandgap.txt
+
+- usb : contains the usb phy pin control node
+
+ The only required property for this child is:
+ - compatible = "ti,omap4-control-usb";
+
+Examples:
+
+ctrl_module_core: ctrl_module_core@4a002000 {
+ compatible = "ti,omap4-control";
+ ti,hwmods = "ctrl_module_core";
+ bandgap {
+ compatible = "ti,omap4460-bandgap";
+ interrupts = <0 126 4>; /* talert */
+ ti,tshut-gpio = <86>; /* tshut */
+ };
+ usb {
+ compatible = "ti,omap4-usb-phy";
+ };
+};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4cf5142..c2ef07c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -52,6 +52,7 @@ config ARCH_OMAP4
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
+ select ARCH_HAS_CONTROL_MODULE
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a..0f9b575 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -5,6 +5,10 @@ menu "TI OMAP Common Features"
config ARCH_OMAP_OTG
bool
+config ARCH_HAS_CONTROL_MODULE
+ bool
+ select MFD_OMAP_CONTROL
+
choice
prompt "OMAP System Type"
default ARCH_OMAP2PLUS
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e129c82..d0c5456 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -822,6 +822,15 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_OMAP_CONTROL
+ bool "Texas Instruments OMAP System control module"
+ depends on ARCH_HAS_CONTROL_MODULE
+ help
+ This is the core driver for system control module. This driver
+ is responsible for creating the control module mfd child,
+ like USB-pin control, pin muxing, MMC-pbias and DDR IO dynamic
+ change for off mode.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 75f6ed6..b037443 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
diff --git a/drivers/mfd/omap-control-core.c b/drivers/mfd/omap-control-core.c
new file mode 100644
index 0000000..724c51b
--- /dev/null
+++ b/drivers/mfd/omap-control-core.c
@@ -0,0 +1,131 @@
+/*
+ * OMAP system control module driver file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contacts:
+ * Based on original code written by:
+ * J Keerthy <j-keerthy@xxxxxx>
+ * Moiz Sonasath <m-sonasath@xxxxxx>
+ * MFD clean up and re-factoring:
+ * Eduardo Valentin <eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/omap_control.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+void __iomem *omap_control_base;
+
+u32 omap_control_status_read(u16 offset)
+{
+ return __raw_readl(omap_control_base + (offset));
+}
+
+static const struct of_device_id of_omap_control_match[] = {
+ { .compatible = "ti,omap3-control", },
+ { .compatible = "ti,omap4-control", },
+ { .compatible = "ti,omap5-control", },
+ { },
+};
+
+static int __devinit omap_control_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ /*
+ * Build child defvices of ctrl_module_core
+ */
+ return of_platform_populate(np, of_omap_control_match, NULL, dev);
+}
+
+
+static struct platform_driver omap_control_driver = {
+ .probe = omap_control_probe,
+ .driver = {
+ .name = "omap-control-core",
+ .owner = THIS_MODULE,
+ .of_match_table = of_omap_control_match,
+ },
+};
+
+int __init omap_control_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct resource res;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ if (of_address_to_resource(node, 0, &res)) {
+ WARN(1, "unable to get intc registers\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init of_omap_control_init(const struct of_device_id *matches)
+{
+ struct device_node *np;
+ struct property *pp = 0;
+ unsigned long phys_base = 0;
+ size_t mapsize = 0;
+
+ for_each_matching_node(np, matches) {
+
+ pp = of_find_property(np, "reg", NULL);
+ if(pp) {
+ phys_base = (unsigned long)be32_to_cpup(pp->value);
+ mapsize = (size_t)be32_to_cpup( (void*)((char*)pp->value + 4) );
+ omap_control_base = ioremap(phys_base, mapsize);
+ }
+ }
+}
+
+static int __init
+omap_control_early_initcall(void)
+{
+ of_omap_control_init(of_omap_control_match);
+
+ return 0;
+}
+early_initcall(omap_control_early_initcall);
+
+static int __init omap_control_init(void)
+{
+ return platform_driver_register(&omap_control_driver);
+}
+postcore_initcall_sync(omap_control_init);
+
+static void __exit omap_control_exit(void)
+{
+ platform_driver_unregister(&omap_control_driver);
+}
+module_exit(omap_control_exit);
+early_platform_init("early_omap_control", &omap_control_driver);
+
+MODULE_DESCRIPTION("OMAP system control module driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:omap-control-core");
+MODULE_AUTHOR("Texas Instruments Inc.");
diff --git a/include/linux/mfd/omap_control.h b/include/linux/mfd/omap_control.h
new file mode 100644
index 0000000..1795403
--- /dev/null
+++ b/include/linux/mfd/omap_control.h
@@ -0,0 +1,52 @@
+/*
+ * OMAP system control module header file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ * J Keerthy <j-keerthy@xxxxxx>
+ * Moiz Sonasath <m-sonasath@xxxxxx>
+ * Abraham, Kishon Vijay <kishon@xxxxxx>
+ * Eduardo Valentin <eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_CONTROL_H
+#define __DRIVERS_OMAP_CONTROL_H
+
+#include <linux/err.h>
+
+/**
+ * struct system control module - scm device structure
+ * @dev: device pointer
+ * @base: Base of the temp I/O
+ * @reg_lock: protect omap_control structure
+ * @use_count: track API users
+ */
+struct omap_control {
+ struct device *dev;
+ void __iomem *base;
+ /* protect this data structure and register access */
+ spinlock_t reg_lock;
+ int use_count;
+};
+
+/* TODO: Add helpers for 16bit and byte access */
+#ifdef CONFIG_MFD_OMAP_CONTROL
+u32 omap_control_status_read(u16 offset);
+#else
+static inline u32 omap_control_status_read(u16 offset)
+{
+ return 0;
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_CONTROL_H */
--
1.7.7.6
