On 5/25/2012 10:25 AM, Eduardo Valentin wrote:
This patch introduces a MFD core device driver for
OMAP system control module.
The control module allows software control of
various static modes supported by the device. It is
composed of two control submodules: general control
module and device (padconfiguration) control
module.
In this patch, the children defined are for:
. USB-phy pin control
. Bangap temperature sensor
Device driver is probed with postcore_initcall.
However, as some of the APIs exposed by this driver
may be needed in very early init phase, an early init
class is also available: "early_omap_control".
Signed-off-by: J Keerthy<j-keerthy@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I<kishon@xxxxxx>
Signed-off-by: Eduardo Valentin<eduardo.valentin@xxxxxx>
---
.../devicetree/bindings/mfd/omap_control.txt | 44 ++++
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/plat-omap/Kconfig | 3 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/omap-control-core.c | 211 ++++++++++++++++++++
include/linux/mfd/omap_control.h | 69 +++++++
7 files changed, 338 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
create mode 100644 drivers/mfd/omap-control-core.c
create mode 100644 include/linux/mfd/omap_control.h
diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt b/Documentation/devicetree/bindings/mfd/omap_control.txt
new file mode 100644
index 0000000..46d5e7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
@@ -0,0 +1,44 @@
+* Texas Instrument OMAP System Control Module (SCM) bindings
+
+The control module allows software control of various static modes supported by
+the device. The control module controls the settings of various device modules
+through register configuration and internal signals. It also controls the pad
+configuration, pin functional multiplexing, and the routing of internal signals
+(such as PRCM signals or DMA requests) to output pins configured for hardware
+observability.
+
+Required properties:
+- compatible : Should be:
+ - "ti,omap3-control" for OMAP3 support
+ - "ti,omap4-control" for OMAP4 support
+ - "ti,omap5-control" for OMAP5 support
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the control module:
+ Should be "ctrl_module_core";
+
+Sub-nodes:
+- bandgap : contains the bandgap node
+
+ The bindings details of individual bandgap device can be found in:
+ Documentation/devicetree/bindings/thermal/omap_bandgap.txt
+
+- usb : contains the usb phy pin control node
+
+ The only required property for this child is:
+ - compatible = "ti,omap4-control-usb";
+
+Examples:
+
+ctrl_module_core: ctrl_module_core@4a002000 {
+ compatible = "ti,omap4-control";
+ ti,hwmods = "ctrl_module_core";
+ bandgap {
+ compatible = "ti,omap4460-bandgap";
+ interrupts =<0 126 4>; /* talert */
+ ti,tshut-gpio =<86>; /* tshut */
+ };
+ usb {
+ compatible = "ti,omap4-usb-phy";
+ };
+};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a2b946d..7dfe5e1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -52,6 +52,7 @@ config ARCH_OMAP4
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
+ select ARCH_HAS_CONTROL_MODULE
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a..222dbad 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -5,6 +5,9 @@ menu "TI OMAP Common Features"
config ARCH_OMAP_OTG
bool
+config ARCH_HAS_CONTROL_MODULE
+ bool
+
choice
prompt "OMAP System Type"
default ARCH_OMAP2PLUS
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 11e4438..25a66d8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -795,6 +795,15 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_OMAP_CONTROL
+ bool "Texas Instruments OMAP System control module"
+ depends on ARCH_HAS_CONTROL_MODULE
+ help
+ This is the core driver for system control module. This driver
+ is responsible for creating the control module mfd child,
+ like USB-pin control, pin muxing, MMC-pbias and DDR IO dynamic
+ change for off mode.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 05fa538..00f99d6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
diff --git a/drivers/mfd/omap-control-core.c b/drivers/mfd/omap-control-core.c
new file mode 100644
index 0000000..7d8d408
--- /dev/null
+++ b/drivers/mfd/omap-control-core.c
@@ -0,0 +1,211 @@
+/*
+ * OMAP system control module driver file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contacts:
+ * Based on original code written by:
+ * J Keerthy<j-keerthy@xxxxxx>
+ * Moiz Sonasath<m-sonasath@xxxxxx>
+ * MFD clean up and re-factoring:
+ * Eduardo Valentin<eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include<linux/module.h>
+#include<linux/export.h>
+#include<linux/platform_device.h>
+#include<linux/slab.h>
+#include<linux/io.h>
+#include<linux/err.h>
+#include<linux/of_platform.h>
+#include<linux/of_address.h>
+#include<linux/mfd/core.h>
+#include<linux/mfd/omap_control.h>
+
+static struct omap_control *omap_control_module;
Mmm, we can have up to 4 control module instances in OMAP4.
Well, I'm not sure it worth considering them as separate devices. Is
that your plan as well?
But since they all have different base address, it will be trick to
handle them with only a single entry.
+
+/**
+ * omap_control_readl: Read a single omap control module register.
+ *
+ * @dev: device to read from.
+ * @reg: register to read.
+ * @val: output with register value.
+ *
+ * returns 0 on success or -EINVAL in case struct device is invalid.
+ */
+int omap_control_readl(struct device *dev, u32 reg, u32 *val)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+
+ if (!omap_control)
+ return -EINVAL;
+
+ *val = readl(omap_control->base + reg);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_control_readl);
+
+/**
+ * omap_control_writel: Write a single omap control module register.
+ *
+ * @dev: device to read from.
+ * @val: value to write.
+ * @reg: register to write to.
+ *
+ * returns 0 on success or -EINVAL in case struct device is invalid.
+ */
+int omap_control_writel(struct device *dev, u32 val, u32 reg)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!omap_control)
+ return -EINVAL;
+
+ spin_lock_irqsave(&omap_control->reg_lock, flags);
+ writel(val, omap_control->base + reg);
+ spin_unlock_irqrestore(&omap_control->reg_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_control_writel);
+
+/**
+ * omap_control_get: returns the control module device pinter
typo
+ *
+ * The modules which has to use control module API's to read or write should
+ * call this API to get the control module device pointer.
+ */
+struct device *omap_control_get(void)
+{
+ unsigned long flags;
+
+ if (!omap_control_module)
+ return ERR_PTR(-ENODEV);
+
+ spin_lock_irqsave(&omap_control_module->reg_lock, flags);
+ omap_control_module->use_count++;
+ spin_unlock_irqrestore(&omap_control_module->reg_lock, flags);
Don't we do have some better way to increment atomically a variable in
Linux.
+
+ return omap_control_module->dev;
+}
+EXPORT_SYMBOL_GPL(omap_control_get);
+
+/**
+ * omap_control_put: returns the control module device pinter
+ *
+ * The modules which has to use control module API's to read or write should
+ * call this API to get the control module device pointer.
+ */
+void omap_control_put(struct device *dev)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!omap_control)
+ return;
+
+ spin_lock_irqsave(&omap_control->reg_lock, flags);
+ omap_control->use_count--;
+ spin_unlock_irqrestore(&omap_control_module->reg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(omap_control_put);
+
+static const struct of_device_id of_omap_control_match[] = {
+ { .compatible = "ti,omap3-control", },
+ { .compatible = "ti,omap4-control", },
+ { .compatible = "ti,omap5-control", },
+ { },
+};
+
+static int __devinit omap_control_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *base;
+ struct device *dev =&pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct omap_control *omap_control;
Maybe omap_control_data instead? At least if this is drvdata only. If
this is supposed to be the *handle* to the control module instance, it
should be fine.
+
+ omap_control = devm_kzalloc(dev, sizeof(*omap_control), GFP_KERNEL);
+ if (!omap_control) {
+ dev_err(dev, "not enough memory for omap_control\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "missing memory base resource\n");
+ return -EINVAL;
+ }
+
+ base = devm_request_and_ioremap(dev, res);
+ if (!base) {
+ dev_err(dev, "ioremap failed\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ omap_control->base = base;
+ omap_control->dev = dev;
+ spin_lock_init(&omap_control->reg_lock);
+
+ platform_set_drvdata(pdev, omap_control);
+ omap_control_module = omap_control;
+
+ return of_platform_populate(np, of_omap_control_match, NULL, dev);
+}
+
+static int __devexit omap_control_remove(struct platform_device *pdev)
+{
+ struct omap_control *omap_control = platform_get_drvdata(pdev);
+
+ spin_lock(&omap_control->reg_lock);
+ if (omap_control->use_count> 0) {
+ spin_unlock(&omap_control->reg_lock);
+ dev_err(&pdev->dev, "device removed while still being used\n");
+ return -EBUSY;
+ }
+ spin_unlock(&omap_control->reg_lock);
+
+ iounmap(omap_control->base);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver omap_control_driver = {
+ .probe = omap_control_probe,
+ .remove = __devexit_p(omap_control_remove),
+ .driver = {
+ .name = "omap-control-core",
+ .owner = THIS_MODULE,
+ .of_match_table = of_omap_control_match,
+ },
+};
+
+static int __init omap_control_init(void)
+{
+ return platform_driver_register(&omap_control_driver);
+}
+postcore_initcall_sync(omap_control_init);
+
+static void __exit omap_control_exit(void)
+{
+ platform_driver_unregister(&omap_control_driver);
+}
+module_exit(omap_control_exit);
+early_platform_init("early_omap_control",&omap_control_driver);
+
+MODULE_DESCRIPTION("OMAP system control module driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:omap-control-core");
+MODULE_AUTHOR("Texas Instruments Inc.");
diff --git a/include/linux/mfd/omap_control.h b/include/linux/mfd/omap_control.h
new file mode 100644
index 0000000..7a33eda
--- /dev/null
+++ b/include/linux/mfd/omap_control.h
@@ -0,0 +1,69 @@
+/*
+ * OMAP system control module header file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ * J Keerthy<j-keerthy@xxxxxx>
+ * Moiz Sonasath<m-sonasath@xxxxxx>
+ * Abraham, Kishon Vijay<kishon@xxxxxx>
+ * Eduardo Valentin<eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_CONTROL_H
+#define __DRIVERS_OMAP_CONTROL_H
+
+#include<linux/err.h>
+
+/**
+ * struct system control module - scm device structure
+ * @dev: device pointer
+ * @base: Base of the temp I/O
+ * @reg_lock: protect omap_control structure
+ * @use_count: track API users
+ */
+struct omap_control {
+ struct device *dev;
Do you really need the dev?
You API is device based and not omap_control based, so it should not be
needed.
I guess we should be consistent here. We can store the devices and used
a device based API or store the omap_control and thus expose a
omap_control API.
Regards,
Benoit
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
