This patch introduces a MFD core device driver for
OMAP system control module.
The control module allows software control of
various static modes supported by the device. It is
composed of two control submodules: general control
module and device (padconfiguration) control
module.
In this patch, the children defined are for:
. USB-phy pin control
. Bangap temperature sensor
Device driver is probed with postcore_initcall.
However, as some of the APIs exposed by this driver
may be needed in very early init phase, an early init
class is also available: "early_omap_control".
Signed-off-by: J Keerthy <j-keerthy@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
---
.../devicetree/bindings/mfd/omap_control.txt | 44 ++++
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/plat-omap/Kconfig | 3 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/omap-control-core.c | 211 ++++++++++++++++++++
include/linux/mfd/omap_control.h | 69 +++++++
7 files changed, 338 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
create mode 100644 drivers/mfd/omap-control-core.c
create mode 100644 include/linux/mfd/omap_control.h
diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt b/Documentation/devicetree/bindings/mfd/omap_control.txt
new file mode 100644
index 0000000..46d5e7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
@@ -0,0 +1,44 @@
+* Texas Instrument OMAP System Control Module (SCM) bindings
+
+The control module allows software control of various static modes supported by
+the device. The control module controls the settings of various device modules
+through register configuration and internal signals. It also controls the pad
+configuration, pin functional multiplexing, and the routing of internal signals
+(such as PRCM signals or DMA requests) to output pins configured for hardware
+observability.
+
+Required properties:
+- compatible : Should be:
+ - "ti,omap3-control" for OMAP3 support
+ - "ti,omap4-control" for OMAP4 support
+ - "ti,omap5-control" for OMAP5 support
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the control module:
+ Should be "ctrl_module_core";
+
+Sub-nodes:
+- bandgap : contains the bandgap node
+
+ The bindings details of individual bandgap device can be found in:
+ Documentation/devicetree/bindings/thermal/omap_bandgap.txt
+
+- usb : contains the usb phy pin control node
+
+ The only required property for this child is:
+ - compatible = "ti,omap4-control-usb";
+
+Examples:
+
+ctrl_module_core: ctrl_module_core@4a002000 {
+ compatible = "ti,omap4-control";
+ ti,hwmods = "ctrl_module_core";
+ bandgap {
+ compatible = "ti,omap4460-bandgap";
+ interrupts = <0 126 4>; /* talert */
+ ti,tshut-gpio = <86>; /* tshut */
+ };
+ usb {
+ compatible = "ti,omap4-usb-phy";
+ };
+};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a2b946d..7dfe5e1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -52,6 +52,7 @@ config ARCH_OMAP4
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
+ select ARCH_HAS_CONTROL_MODULE
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a..222dbad 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -5,6 +5,9 @@ menu "TI OMAP Common Features"
config ARCH_OMAP_OTG
bool
+config ARCH_HAS_CONTROL_MODULE
+ bool
+
choice
prompt "OMAP System Type"
default ARCH_OMAP2PLUS
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 11e4438..25a66d8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -795,6 +795,15 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_OMAP_CONTROL
+ bool "Texas Instruments OMAP System control module"
+ depends on ARCH_HAS_CONTROL_MODULE
+ help
+ This is the core driver for system control module. This driver
+ is responsible for creating the control module mfd child,
+ like USB-pin control, pin muxing, MMC-pbias and DDR IO dynamic
+ change for off mode.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 05fa538..00f99d6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
diff --git a/drivers/mfd/omap-control-core.c b/drivers/mfd/omap-control-core.c
new file mode 100644
index 0000000..7d8d408
--- /dev/null
+++ b/drivers/mfd/omap-control-core.c
@@ -0,0 +1,211 @@
+/*
+ * OMAP system control module driver file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contacts:
+ * Based on original code written by:
+ * J Keerthy <j-keerthy@xxxxxx>
+ * Moiz Sonasath <m-sonasath@xxxxxx>
+ * MFD clean up and re-factoring:
+ * Eduardo Valentin <eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/omap_control.h>
+
+static struct omap_control *omap_control_module;
+
+/**
+ * omap_control_readl: Read a single omap control module register.
+ *
+ * @dev: device to read from.
+ * @reg: register to read.
+ * @val: output with register value.
+ *
+ * returns 0 on success or -EINVAL in case struct device is invalid.
+ */
+int omap_control_readl(struct device *dev, u32 reg, u32 *val)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+
+ if (!omap_control)
+ return -EINVAL;
+
+ *val = readl(omap_control->base + reg);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_control_readl);
+
+/**
+ * omap_control_writel: Write a single omap control module register.
+ *
+ * @dev: device to read from.
+ * @val: value to write.
+ * @reg: register to write to.
+ *
+ * returns 0 on success or -EINVAL in case struct device is invalid.
+ */
+int omap_control_writel(struct device *dev, u32 val, u32 reg)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!omap_control)
+ return -EINVAL;
+
+ spin_lock_irqsave(&omap_control->reg_lock, flags);
+ writel(val, omap_control->base + reg);
+ spin_unlock_irqrestore(&omap_control->reg_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_control_writel);
+
+/**
+ * omap_control_get: returns the control module device pinter
+ *
+ * The modules which has to use control module API's to read or write should
+ * call this API to get the control module device pointer.
+ */
+struct device *omap_control_get(void)
+{
+ unsigned long flags;
+
+ if (!omap_control_module)
+ return ERR_PTR(-ENODEV);
+
+ spin_lock_irqsave(&omap_control_module->reg_lock, flags);
+ omap_control_module->use_count++;
+ spin_unlock_irqrestore(&omap_control_module->reg_lock, flags);
+
+ return omap_control_module->dev;
+}
+EXPORT_SYMBOL_GPL(omap_control_get);
+
+/**
+ * omap_control_put: returns the control module device pinter
+ *
+ * The modules which has to use control module API's to read or write should
+ * call this API to get the control module device pointer.
+ */
+void omap_control_put(struct device *dev)
+{
+ struct omap_control *omap_control = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!omap_control)
+ return;
+
+ spin_lock_irqsave(&omap_control->reg_lock, flags);
+ omap_control->use_count--;
+ spin_unlock_irqrestore(&omap_control_module->reg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(omap_control_put);
+
+static const struct of_device_id of_omap_control_match[] = {
+ { .compatible = "ti,omap3-control", },
+ { .compatible = "ti,omap4-control", },
+ { .compatible = "ti,omap5-control", },
+ { },
+};
+
+static int __devinit omap_control_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *base;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct omap_control *omap_control;
+
+ omap_control = devm_kzalloc(dev, sizeof(*omap_control), GFP_KERNEL);
+ if (!omap_control) {
+ dev_err(dev, "not enough memory for omap_control\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "missing memory base resource\n");
+ return -EINVAL;
+ }
+
+ base = devm_request_and_ioremap(dev, res);
+ if (!base) {
+ dev_err(dev, "ioremap failed\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ omap_control->base = base;
+ omap_control->dev = dev;
+ spin_lock_init(&omap_control->reg_lock);
+
+ platform_set_drvdata(pdev, omap_control);
+ omap_control_module = omap_control;
+
+ return of_platform_populate(np, of_omap_control_match, NULL, dev);
+}
+
+static int __devexit omap_control_remove(struct platform_device *pdev)
+{
+ struct omap_control *omap_control = platform_get_drvdata(pdev);
+
+ spin_lock(&omap_control->reg_lock);
+ if (omap_control->use_count > 0) {
+ spin_unlock(&omap_control->reg_lock);
+ dev_err(&pdev->dev, "device removed while still being used\n");
+ return -EBUSY;
+ }
+ spin_unlock(&omap_control->reg_lock);
+
+ iounmap(omap_control->base);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver omap_control_driver = {
+ .probe = omap_control_probe,
+ .remove = __devexit_p(omap_control_remove),
+ .driver = {
+ .name = "omap-control-core",
+ .owner = THIS_MODULE,
+ .of_match_table = of_omap_control_match,
+ },
+};
+
+static int __init omap_control_init(void)
+{
+ return platform_driver_register(&omap_control_driver);
+}
+postcore_initcall_sync(omap_control_init);
+
+static void __exit omap_control_exit(void)
+{
+ platform_driver_unregister(&omap_control_driver);
+}
+module_exit(omap_control_exit);
+early_platform_init("early_omap_control", &omap_control_driver);
+
+MODULE_DESCRIPTION("OMAP system control module driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:omap-control-core");
+MODULE_AUTHOR("Texas Instruments Inc.");
diff --git a/include/linux/mfd/omap_control.h b/include/linux/mfd/omap_control.h
new file mode 100644
index 0000000..7a33eda
--- /dev/null
+++ b/include/linux/mfd/omap_control.h
@@ -0,0 +1,69 @@
+/*
+ * OMAP system control module header file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ * J Keerthy <j-keerthy@xxxxxx>
+ * Moiz Sonasath <m-sonasath@xxxxxx>
+ * Abraham, Kishon Vijay <kishon@xxxxxx>
+ * Eduardo Valentin <eduardo.valentin@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_CONTROL_H
+#define __DRIVERS_OMAP_CONTROL_H
+
+#include <linux/err.h>
+
+/**
+ * struct system control module - scm device structure
+ * @dev: device pointer
+ * @base: Base of the temp I/O
+ * @reg_lock: protect omap_control structure
+ * @use_count: track API users
+ */
+struct omap_control {
+ struct device *dev;
+ void __iomem *base;
+ /* protect this data structure and register access */
+ spinlock_t reg_lock;
+ int use_count;
+};
+
+/* TODO: Add helpers for 16bit and byte access */
+#ifdef CONFIG_MFD_OMAP_CONTROL
+extern int omap_control_readl(struct device *dev, u32 reg, u32 *val);
+extern int omap_control_writel(struct device *dev, u32 val, u32 reg);
+extern struct device *omap_control_get(void);
+extern void omap_control_put(struct device *dev);
+#else
+static inline int omap_control_readl(struct device *dev, u32 reg, u32 *val)
+{
+ return 0;
+}
+
+static inline int omap_control_writel(struct device *dev, u32 val, u32 reg)
+{
+ return 0;
+}
+
+static inline struct device *omap_control_get(void)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline void omap_control_put(struct device *dev)
+{
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_CONTROL_H */
--
1.7.7.1.488.ge8e1c
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
