Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> writes:
> On Tue 07 Jun 2011 at 23:17:49 Kevin Hilman wrote:
>> Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> writes:
>> > ... Or should
>> > arch/arm/mach-omap1/pm_bus.c be always built in and
>> > pm_runtime_clk_add_notifier() called from there in order to enable
>> > clocks on device initialization even if CONFIG_PM_RUNTIME is not
>> > set? Or still a better solution?
>>
>> You're on the right track already.
>>
>> Yes, the notifier init should be done even on the !PM_RUNTIME case so
>> that clocks are enabled when the device is added and disabled when
>> the device is removed.
>>
>> Can you try the patch below (only compile tested)
>
> It's OK, but kind of no-op unless something like below is also applied.
Indeed.
> With it appended to your patch, you can add my Tested-by or what-else-by
> you may find appropriate.
Thanks, will fold your diff into the patch, add your Tested-by and
submit as a PM fix for v3.0.
Thanks,
Kevin
> Thanks,
> Janusz
>
> ---
> --- git/arch/arm/mach-omap1/Makefile.orig 2011-06-06 18:06:57.000000000 +0200
> +++ git/arch/arm/mach-omap1/Makefile 2011-06-07 23:40:11.000000000 +0200
> @@ -4,14 +4,14 @@
>
> # Common support
> obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
> -obj-y += clock.o clock_data.o opp_data.o reset.o
> +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
>
> obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
>
> obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
>
> # Power Management
> -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
> +obj-$(CONFIG_PM) += pm.o sleep.o
>
> # DSP
> obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
> --
>
>> If it works, and with your Tested-by, I'll queue this as a fix for
>> v3.0-rc.
>>
>> Thanks,
>>
>> Kevin
>>
>> >From 971a6b1ba5cbca7b38fb14ae834b124c6e7bf9b5 Mon Sep 17 00:00:00
>> >2001
>>
>> From: Kevin Hilman <khilman@xxxxxx>
>> Date: Tue, 7 Jun 2011 14:13:33 -0700
>> Subject: [PATCH] OMAP1: PM: register notifiers with generic clock ops
>> even when !PM_RUNTIME
>>
>> When runtime PM is disabled, device clocks need to be enabled on
>> device add and disabled on device remove. This currently is not
>> happening because in the !PM_RUNTIME case, no notifiers are
>> registered for OMAP1 devices.
>>
>> Fix this by ensuring notifiers are registered, even in the
>> !PM_RUNTIME case.
>>
>> Reported-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
>> Signed-off-by: Kevin Hilman <khilman@xxxxxx>
>> ---
>> arch/arm/mach-omap1/pm_bus.c | 8 ++++++--
>> 1 files changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap1/pm_bus.c
>> b/arch/arm/mach-omap1/pm_bus.c index fe31d93..334fb88 100644
>> --- a/arch/arm/mach-omap1/pm_bus.c
>> +++ b/arch/arm/mach-omap1/pm_bus.c
>> @@ -56,9 +56,13 @@ static struct dev_power_domain
>> default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS
>> },
>> };
>> +#define OMAP1_PWR_DOMAIN (&default_power_domain)
>> +#else
>> +#define OMAP1_PWR_DOMAIN NULL
>> +#endif /* CONFIG_PM_RUNTIME */
>>
>> static struct pm_clk_notifier_block platform_bus_notifier = {
>> - .pwr_domain = &default_power_domain,
>> + .pwr_domain = OMAP1_PWR_DOMAIN,
>> .con_ids = { "ick", "fck", NULL, },
>> };
>>
>> @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
>> return 0;
>> }
>> core_initcall(omap1_pm_runtime_init);
>> -#endif /* CONFIG_PM_RUNTIME */
>> +
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
