On Tue 07 Jun 2011 at 23:17:49 Kevin Hilman wrote:
> Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> writes:
> > ... Or should
> > arch/arm/mach-omap1/pm_bus.c be always built in and
> > pm_runtime_clk_add_notifier() called from there in order to enable
> > clocks on device initialization even if CONFIG_PM_RUNTIME is not
> > set? Or still a better solution?
>
> You're on the right track already.
>
> Yes, the notifier init should be done even on the !PM_RUNTIME case so
> that clocks are enabled when the device is added and disabled when
> the device is removed.
>
> Can you try the patch below (only compile tested)
It's OK, but kind of no-op unless something like below is also applied.
With it appended to your patch, you can add my Tested-by or what-else-by
you may find appropriate.
Thanks,
Janusz
---
--- git/arch/arm/mach-omap1/Makefile.orig 2011-06-06 18:06:57.000000000 +0200
+++ git/arch/arm/mach-omap1/Makefile 2011-06-07 23:40:11.000000000 +0200
@@ -4,14 +4,14 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
--
> If it works, and with your Tested-by, I'll queue this as a fix for
> v3.0-rc.
>
> Thanks,
>
> Kevin
>
> >From 971a6b1ba5cbca7b38fb14ae834b124c6e7bf9b5 Mon Sep 17 00:00:00
> >2001
>
> From: Kevin Hilman <khilman@xxxxxx>
> Date: Tue, 7 Jun 2011 14:13:33 -0700
> Subject: [PATCH] OMAP1: PM: register notifiers with generic clock ops
> even when !PM_RUNTIME
>
> When runtime PM is disabled, device clocks need to be enabled on
> device add and disabled on device remove. This currently is not
> happening because in the !PM_RUNTIME case, no notifiers are
> registered for OMAP1 devices.
>
> Fix this by ensuring notifiers are registered, even in the
> !PM_RUNTIME case.
>
> Reported-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
> Signed-off-by: Kevin Hilman <khilman@xxxxxx>
> ---
> arch/arm/mach-omap1/pm_bus.c | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/pm_bus.c
> b/arch/arm/mach-omap1/pm_bus.c index fe31d93..334fb88 100644
> --- a/arch/arm/mach-omap1/pm_bus.c
> +++ b/arch/arm/mach-omap1/pm_bus.c
> @@ -56,9 +56,13 @@ static struct dev_power_domain
> default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS
> },
> };
> +#define OMAP1_PWR_DOMAIN (&default_power_domain)
> +#else
> +#define OMAP1_PWR_DOMAIN NULL
> +#endif /* CONFIG_PM_RUNTIME */
>
> static struct pm_clk_notifier_block platform_bus_notifier = {
> - .pwr_domain = &default_power_domain,
> + .pwr_domain = OMAP1_PWR_DOMAIN,
> .con_ids = { "ick", "fck", NULL, },
> };
>
> @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
> return 0;
> }
> core_initcall(omap1_pm_runtime_init);
> -#endif /* CONFIG_PM_RUNTIME */
> +
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
