On Thu 2009-03-26 20:55:23, Tvrtko A. Ursulin wrote: > On Thursday 26 March 2009 20:18:40 Pavel Machek wrote: > > On Thu 2009-03-26 19:20:32, Tvrtko A. Ursulin wrote: > > > Hi guys, > > > I have been running custom compiled 2.6.28.7 in OpenSUSE 11.1 and using > > > hiberation/resume daily as configured by the distro. Yesterday I upgraded > > > to 2.6.29 (make oldconfig from 2.6.28.7, attached) and after resume > > > networking (at least) does not work. Reboot at this point takes very long > > > because of timeouts on CIFS and whatelse. > > > > > > Below is how /var/log/messagess looks for one cycle > > > (hibernate-resume-reboot) and I am also attaching kernel config and > > > /var/log/pm-suspend.log. > > > > > > You will probably notice evil nvidia.ko in there but don't panic, it all > > > happens without it as well. Tested from runlevel 3 and by running > > > pm-hibernate. After resume from that NIC LEDs were off. I > > > tried /etc/init.d/network restart but that hung so I ^C and tried rmmod > > > forcedeth && modprobe forcedeth && ifup eth0 and after some time network > > > went live again. Haven't had time to test further though, so this is all > > > pretty rough. > > > > Ok, can you try to rmmod forcedeth before hibernation, then insmod it > > after resume? > > Sure, after insmod and /etc/init.d/network start following resume network was > fine. Guess I could kludge that sequence into pm scripts somehow but would > rather avoid that since it slows down the cycle and would make scripts > non-stock. Ok, I guess you need to talk to forcedeth maintainers then... sounds like a forcedeth problem to me. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
