Re: Resume after hibernation regression in 2.6.29

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 2009-03-26 19:20:32, Tvrtko A. Ursulin wrote:
> 
> Hi guys,
> I have been running custom compiled 2.6.28.7 in OpenSUSE 11.1 and using 
> hiberation/resume daily as configured by the distro. Yesterday I upgraded to 
> 2.6.29 (make oldconfig from 2.6.28.7, attached) and after resume networking 
> (at least) does not work. Reboot at this point takes very long because of 
> timeouts on CIFS and whatelse.
> 
> Below is how /var/log/messagess looks for one cycle (hibernate-resume-reboot) 
> and I am also attaching kernel config and /var/log/pm-suspend.log.
> 
> You will probably notice evil nvidia.ko in there but don't panic, it all 
> happens without it as well. Tested from runlevel 3 and by running 
> pm-hibernate. After resume from that NIC LEDs were off. I 
> tried /etc/init.d/network restart but that hung so I ^C and tried rmmod 
> forcedeth && modprobe forcedeth && ifup eth0 and after some time network went 
> live again. Haven't had time to test further though, so this is all pretty 
> rough.

Ok, can you try to rmmod forcedeth before hibernation, then insmod it
after resume?
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux