On Fri, 16 Jan 2009, Rafael J. Wysocki wrote: > There is a problem in our handling of suspend-resume of PCI devices > that many of them have their standard config registers restored with > interrupts enabled and they are put into the full power state with > interrupts enabled as well. This may lead to the following scenario: > * an interrupt vector is shared between two or more devices > * one device is resumed earlier and generates an interrupt > * the interrupt handler of another device tries to handle it and > attempts to access the device the config space of which hasn't > been restored yet and/or which still is in a low power state > * the system crashes as a result > > To prevent this from happening we should restore the standard > configuration registers of all devices with interrupts disabled and > we should put them into the D0 power state right after that. > Unfortunately, this cannot be done using the existing > pci_set_power_state(), because it can sleep. Also, to do it we have > to make sure that the config spaces of all devices were actually > saved during suspend. Alternatively, PCI drivers should be smart enough to realize that a shared interrupt arriving while their device is suspended could not possibly be generated by that device. In such a case the driver can return IRQ_NONE directly, without ever touching the device. USB does this. However I admit that fixing every PCI driver would be a big chore... Alan Stern _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
