On Tue, 2008-12-30 at 22:59 +0100, Rafael J. Wysocki wrote: > On Monday 29 December 2008, Maxim Levitsky wrote: > > On Mon, 2008-12-29 at 19:19 +0100, Rafael J. Wysocki wrote: > > > From: Rafael J. Wysocki <rjw@xxxxxxx> > > > > > > According to the ACPI specification the SCI_EN flag is controlled by > > > the hardware, which sets this flag to inform the kernel that ACPI is > > > enabled. For this reason, we shouldn't try to modify SCI_EN > > > directly. Also, we don't need to do it in irqrouter_resume(), since > > > lower-level resume code takes care of enabling ACPI in case it hasn't > > > been enabled by the BIOS before passing control to the kernel (which > > > by the way is against the ACPI specification). > > > > > > Hi, > > Hi, > > > I am an unfortunate owner of an acer notebook ( aspire 5720 if this > > matters) and it doesn't come back after second suspend, subsequently I > > figured out that bios doesn't pass control to linux at all, after second > > resume, and moreover, a suspend to disk , 'fixes' this and enables me to > > do another suspend/resume cycle. This is a poor man workaround I use > > now. > > I suspect there may be a problem with interrupts handling on your system. > > There is http://bugzilla.kernel.org/show_bug.cgi?id=11698 describing a very > similar (if not the same) issue. Please attach a boot log and the contents > of /proc/interrupts to that bug. > > > I already told about this here, and many peoples from here (including > > you) tried to help me, but unfortunately this is very weird issue, and > > nether me nor you can do much about, it is all about guesswork, > > something, at least something is 'armed' on resume, so it confuses bios > > then (it could be that yet, the critical part that confuses bios happens > > in second suspend time) > > > > Needless to say that nothing useful appears in the logs, and everything > > seems to work fine following each successful resume (both disk and ram). > > > > so I have a question, do you have a git branch to pull that includes all > > patches like this to test, so I build it weekly, and who knows, maybe > > something like above will fix it. > > Unfortunately, I don't. If I have any patches that can possibly fix the > problem, I'll let you know. > > > Anyway I would gladly test any patch that you suspect might be involved > > here. > > > > Also, I tried to do a I/O port and PCI config dump before and after a > > resume, aka in 'armed' and 'unarmed' state. > > > > While there were many I/O port registers changes, and I yet to process > > it bit after bit (and unfortunately there are plenty of undocumented > > stuff), I noticed a meaningful change between bad and good state: > > Please check if the appended patch from Len changes anything. > > Thanks, > Rafael > > --- > Author: Len Brown <len.brown@xxxxxxxxx> > Date: Sat Dec 20 12:50:23 2008 +0100 > > ACPI: PCI Interrupt Links -- disable when unused > > We start the system off with disabled links. > Here we enable the reference counting > on the links so that when drivers free IRQs > the links can return to the disabled state. > > Drivers free their IRQ and reference on a link > when they unload. They may also do so upon > suspend. However, if they don't, irqrouter_resume() > will still resume any links that were > not disabled before suspend. > > Signed-off-by: Len Brown <len.brown@xxxxxxxxx> > > diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c > index 595b131..0f7722d 100644 > --- a/drivers/acpi/pci_link.c > +++ b/drivers/acpi/pci_link.c > @@ -693,18 +693,7 @@ int acpi_pci_link_free_irq(acpi_handle handle) > printk(KERN_ERR PREFIX "Link isn't initialized\n"); > return -1; > } > -#ifdef FUTURE_USE > - /* > - * The Link reference count allows us to _DISable an unused link > - * and suspend time, and set it again on resume. > - * However, 2.6.12 still has irq_router.resume > - * which blindly restores the link state. > - * So we disable the reference count method > - * to prevent duplicate acpi_pci_link_set() > - * which would harm some systems > - */ > link->refcnt--; > -#endif > ACPI_DEBUG_PRINT((ACPI_DB_INFO, > "Link %s is dereferenced %d\n", > acpi_device_bid(link->device), link->refcnt)); > As usual, same hang after resume. Just to note, this isn't a regression, it even appears in 2.6.19. Best regards, Maxim Levitsky _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
